Tripp Lite SmartRack SR18UB Handleiding

Tripp Lite Niet gecategoriseerd SmartRack SR18UB

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartRack SR18UB (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

Table of Contents

1. Important Safety Instructions 2

2. Overview 2

3. Feature Identification 3

4. Enclosure Installation 4

4.1 Preparation 4

4.2 Unpacking 4

4.3 Installing Casters and Levelers 4

4.4 Placement 4

4.5 Leveling the Enclosure 5

4.6 Ground Connection 5

5. Enclosure Configuration 6

5.1 Door Locks 6

5.2 Reversing the Doors 6

5.3 Mounting Rails 6

5.4 Adjusting Mounting Rail Depth 6

6. Equipment Installation 7

6.1 Installing or Removing Cage Nuts 7

7. Specifications 7

8. Storage and Service 8

9. Warranty & Warranty Registration 8

Español 9

Français 17

Owner’s Manual

18U SmartRack™ Enclosure

Model: SR18UB

WARRANTY

REGISTRATION

chance to win a FREE Tripp Lite

product www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

1. Important Safety Instructions

2. Overview

SAVE THESE INSTRUCTIONS

This Manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual. Failure to

comply may invalidate the warranty and cause property damage or personal injury.

• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation

openings of the enclosure.

• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a

mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container.

• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.

• Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.

• Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible.

• Install the enclosure in a structurally sound area capable of handling the load, or on a level floor that is able to bear the weight of the enclosure, all

equipment that will be installed in the enclosure and any other enclosures and/or equipment that will be installed nearby.

• Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage

that will void the warranty.

• Do not reship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet (“SP1” models only). The

combined weight of the enclosure and installed equipment must not exceed the load capacity of the pallet. Tripp Lite is not responsible for any

damage that occurs during reshipment.

• The casters are designed for minor position adjustments within the final installation area only. The casters are not designed for moving the

enclosure over longer distances.

• When rolling the enclosure on its casters, always push it from behind; never pull it toward you.

• A rolling enclosure can cause personal injury and property damage if not properly supervised. If rolling the enclosure down a ramp is required, use

extreme caution. Do not attempt to use ramps that have a slope steeper than 1:12.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support

equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable

anesthetic mixture with air, oxygen or nitrous oxide.

SmartRack Enclosures accommodate all standard 19-inch rackmount equipment, regardless of vendor, and ship fully assembled for quick and easy

deployment.

3. Feature Identification

1 Locking/Reversible Front Door

2 Locking/Reversible Back Door

3 Horizontal Rails

4 Vertical Mounting Rails

5 Vents

6 Locking/Removable Side Panels

7 Casters

8 Leveling Feet

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	SmartRack SR18UB
Kleur van het product:	Zwart
Gewicht:	47630 g
Breedte:	599.9 mm
Diepte:	850.9 mm
Hoogte:	904.2 mm
Gewicht verpakking:	56700 g
Breedte verpakking:	609.6 mm
Diepte verpakking:	863.6 mm
Hoogte verpakking:	1041.4 mm
Soort:	Vrijstaande rek
Land van herkomst:	China
Maximale gewichtscapaciteit:	453.6 kg
Certificering:	UL60950\r\nEIA-310-E\r\nNOM\r\nRoHS
(Buitenste) hoofdverpakking hoogte:	1041.4 mm
(Buitenste) hoofdverpakking breedte:	609.6 mm
(Buitenste) hoofdverpakking brutogewicht:	56700 g
(Buitenste) hoofdverpakking lengte:	863.6 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Rackcapaciteit:	18U
Code geharmoniseerd systeem (HS):	8517.79.0000