Tripp Lite RELAYCARDSV Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite RELAYCARDSV (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
1
Owner’s Manual
Relay I/O Card
Model: RELAYCARDSV
1 Introduction 2
1.1 Product Features 2
1.2 Package Contents 2
2 Installation and Setup 2
2.1 System Requirements 2
2.2 Installation 2
3 Specifications 3
3.1 Internal Circuit 3
3.2 Electric Specifications 3
3.3 Pin Assignment 3
3.4 Function Description 4
3.5 Application Example 4
4 Internal Logic Connection 5
4.1 Pin Definition and 5
Internal Logic Connection
4.2 Connection for Normally Closed 5
4.3 Connection for Normally Open 5
5. Jumper Configuration 6
5.1 Jumper Setup 6
5.2 Jumper Function Description 6
6. Warranty and Product Registration 7
Español 8
Français 15
Русский 22
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
2
1.1 Product Features
The RELAYCARDSV communication card provides contact closures for remote
UPS monitoring. To meet different application requirements, the RELAYCARDSV
allows the user to select status of the dry-contact signal (normally closed or
open) by setting the jumper. Typical applications include:
IBM Server, PC and workstation equipment
Auto-controlled industrial equipment
and communication applications
1.2 Package Contents
RELAYCARDSV
Owner’s Manual
9-Pin Communication Cable
2.1 System Requirements
The RELAYCARDSV supports Tripp Lite SmartOnline® SVTX 400V Non-Modular, SVX 400V Modular, and SV 208V Modular UPS systems.
2.2 Installation
1. Introduction
2. Installation and Setup
Step 2: Insert RELAYCARDSV into the ACC Slot.
Step 3: Using a screwdriver and screws provided from removing
the ACC Slot cover in Step 1, secure the RELAYCARDSV to the UPS
chassis.
Step 1: Using a screwdriver, remove the ACC Slot cover located on
the rear panel (SVTX Series) or front panel for Modular systems (SVX-
and SV-Series).
Step 4: Use the 9-pin communication cable to connect UPS and
equipment for remote monitoring and control.
3
3.1 Internal Circuit
DB9 Internal Circuit Diagram
3. Specifications
3.2 Electric Specifications
DB9 Port Electric Specifications
Parameter Symbol Max. Min. Unit
Resistor* DC Current IR 6 1 mA
Diode Reverse Voltage VR 6 - V
Forward Current IF 50 - mA
Peak Forward Current IF (Peak) 1 - A
Relay DC Voltage VDC 24 - V
DC Current IDC 1.0 - A
Note: DC current should be lower than 6mA. When the DC current exceeds 6mA, a resistor within DC current limitation should be added within the Remote
Shutdown/Common loop (e.g. a 2K resistor with at least 0.1W rating power). For more information, refer to diagrams A and B in .3.5 Application Example
3.3 Pin Assignment
Pin Assignment Function I/O
Pin 1 UPS Failure O/P
Pin 2 UPS Audible Alarm O/P
Pin 3 GND (Common for Pin 4) Power Ground
Pin 4 Remote Shutdown I/P
Pin 5 Common for Relays Power Supply
Pin 6 Bypass Active O/P
Pin 7 Low Battery O/P
Pin 8 UPS On O/P
Pin 9 Utility Failure O/P
Note: The shutdown pin (pin 3 and pin 4) only accepts 3-10s high level signal to perform the UPS shutdown.


Product specificaties

Merk: Tripp Lite
Categorie: Niet gecategoriseerd
Model: RELAYCARDSV
Kleur van het product: Green,Silver
Gewicht: 80 g
Breedte: 67.1 mm
Diepte: 129 mm
Hoogte: 33 mm
Gewicht verpakking: 200 g
Breedte verpakking: 166.1 mm
Diepte verpakking: 124.2 mm
Hoogte verpakking: 48 mm
Land van herkomst: China
Compatibele producten: Tripp Lite SVTX 400V, SVX 400V,
Aantal kanalen: - kanalen
Afmetingen (B x D x H): 33 x 67 x 129 mm
(Buitenste) hoofdverpakking hoogte: 240 mm
(Buitenste) hoofdverpakking breedte: 341.9 mm
(Buitenste) hoofdverpakking brutogewicht: 4500 g
(Buitenste) hoofdverpakking lengte: 297.9 mm
Hoeveelheid per (buitenste) hoofdverpakking: 20 stuk(s)
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking: 10037332199772
Signaal directie: Invoer
Kanaal type: Relay-kanaal

Heb je hulp nodig?

Als je hulp nodig hebt met Tripp Lite RELAYCARDSV stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Tripp Lite

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd