Tripp Lite Protect It! SK10USB Handleiding

Tripp Lite Niet gecategoriseerd Protect It! SK10USB

Lees hieronder de đź“– handleiding in het Nederlandse voor Tripp Lite Protect It! SK10USB (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
1
1111 W. 35th Street Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2014. All rights reserved. Protect It!
® is a registered trademark of Tripp Lite.
Owner’s Manual
Protect It!® Wall-Mount
Surge Protectors with
Dedicated USB Charging Ports
Models: SK10USB, SK30USB, SK120USB
Installation 2
Lifetime Limited Warranty 3
Ultimate Lifetime Insurance Policy 4
Warranty Registration 3
Important Safety Instructions 2
14-03-209-933349.indd 1 4/18/2014 1:55:21 PM
2
Installation
Connect Your Surge Protector to the AC Power Line: Plug the surge protector directly into a
3-wire grounded, 120V AC outlet.
Secure Surge Protector to Outlet Using Included Mounting Screw (SK30USB only):
Securing the surge protector to the outlet will prevent accidental disconnection. Remove the
wall outlet cover plate and plug in surge protector. Screw in the included mounting screw to
attach the surge protector to the outlet.
Check Your Surge Protector’s Diagnostic Indicator Lights: If your surge protector features
diagnostic LEDs or indicators, check them prior to connecting your equipment. They will indicate
various operating conditions when the surge protector is plugged into a live 120V AC outlet and
the surge protector’s power switch is on.
“PROTECTED” LED: Indicates the surge suppression components are intact and providing
complete protection against surges. If this LED does not illuminate, some of the surge
suppression components are not functioning, and the unit should be replaced.
Visit www.tripplite.com/support.
Connect Your Equipment to the Surge Protector’s AC Outlets: Plug your equipment’s power
cords (including 2-wire devices) into the surge protector’s AC outlets. Select models feature
integrated safety covers which cover the outlets when not in use. Other models feature special
widely-spaced outlets to accommodate transformers without covering other outlets. DO NOT
plug in extension cords. DO NOT OVERLOAD the surge protector’s outlets. The surge protector
can accommodate a total equipment load of up to 15 amps (whether plugged into a single
outlet or spread out over multiple outlets).
USB Charging Ports: Two USB charging ports are capable of delivering up to 2.1 A total (2.4 A
total for the SK10USB). This will provide enough power to charge the most demanding devices,
including smartphones, tablets and MP3 players.
SAVE THESE INSTRUCTIONS
CAUTION! DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension
cords or adapters. This surge protector is designed for indoor use only. Install the surge
protector away from heat-emitting appliances such as radiators or heat registers. Do not
install where excessive moisture is present. Do not plug extension cords into it. Never install
electrical, telephone, network or coaxial wiring during a lightning storm. Do not drill into any
part of the housing or open the housing for any reason. There are no user-serviceable parts
inside.
Important Safety Instructions
• Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
14-03-209-933349.indd 2 4/18/2014 1:55:21 PM
3
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material
and workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will
repair or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or
shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th St., Chicago, IL 60609. Seller
will pay return shipping charges.
The warranties of all TRIPP LITE surge protectors are null and void if they have been connected to the output of any UPS
system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge protector has been connected to its output
receptacles.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR
NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY
OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY
EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied
warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which
vary from jurisdiction to jurisdiction.)
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for
the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or
warranty as to the suitability or fitness of these devices for any specific application.
The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique
series number. The series number can be found on the product nameplate label, along with all required approval markings and
information. When requesting compliance information for this product, always refer to the series number. The series number
should not be confused with the marketing name or model number of the product.
Lifetime Limited Warranty
Warranty Registration
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into
a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
14-03-209-933349.indd 3 4/18/2014 1:55:21 PM


Product specificaties

Merk: Tripp Lite
Categorie: Niet gecategoriseerd
Model: Protect It! SK10USB
Kleur van het product: Zwart
Breedte: 68.1 mm
Diepte: 32.5 mm
Hoogte: 79.5 mm
LED-indicatoren: Ja
Aantal USB-aansluitingen: 2
Certificering: UL1449
Duurzaamheidscertificaten: RoHS
Draadloos: Ja
Stekker: NEMA 5–15P
Afstandsbediening inbegrepen: Nee
Aantal producten inbegrepen: 1 stuk(s)
Surge energy rating: 1080 J
Aantal AC uitgangen: 1 AC-uitgang(en)
Nominale input voltage: 120 V
Stopcontacttypes: NEMA 5–15P
Nominale stroom output: 15 A
EMI/RFI geluidsfiltering: Ja
Klem voltage: 500 V

Heb je hulp nodig?

Als je hulp nodig hebt met Tripp Lite Protect It! SK10USB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Tripp Lite

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd