Tripp Lite B110-SP-10G Handleiding

Tripp Lite Niet gecategoriseerd B110-SP-10G

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite B110-SP-10G (32 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

In-Line Network

Surge Protector,

10 Gbps, Cat6a

Model: B110-SP-10G

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Quick Start Guide

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

Español 9 • Français 17 • Русский 25

• B110-SP-10G 10 Gbps In-Line Network Surge Protector

• Grounding Wire

• Mounting Screws (x4)

• Screw Anchors (x4)

• Grounding Wire Screw

• Quick Start Guide

• Protects your network equipment’s inputs and outputs against electro-

static discharge (ESD), power surges and cable discharge events

• Meets the following IEC regulations:

o IEC 61000-4-2: Indirect discharge (4kV), direct discharge (8kV)

o IEC 61000-4-5 (Lightning) 2kA (8/20µs), 1kV (8/20µs)

• Easy to connect between network source and device using

standard Cat5/5e/6/6a/8 cabling

• Rapid reaction time under 1 ns helps prevent damage from

lightning/power surges

• Supports Ethernet network data transmission speeds up to 10 Gbps

• Plug-and-play operation with no software required for easy,

immediate installation

• Supports distance between the B110-SP-10G and equipment up

to 330 ft. (100 m)

• Compliant with the Federal Trade Agreements Act (TAA) for GSA

(General Services Administration) Schedule and other federal

procurement contracts

Package Includes

Product Features

Note: The following instructions assume that two network devices are

currently connected together.

Single Device Protection:

1. Disconnect the installed patch cable from the device you wish

to protect and attach it to the “Cable End” of the In-Line 10G

Network Surge Protector.

2. With a user-supplied Cat5/5e/6/6a/8 patch cable, connect the

device to be protected to the “Equipment End” of the In-Line

10G Network Surge Protector.

Note: For best protection performance, the patch cable between

the “Equipment End” on the B110-SP-10G and the equipment

to be protected should not exceed 330 ft. (100 m). Tripp Lite’s

N261-Series Cat6a Snagless Patch Cables are recommended.

3. Connect the ground wire to the In-Line 10G Network Surge

Protector and then to earth ground.

Installation

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	B110-SP-10G
Kleur van het product:	Zwart
Gewicht:	250 g
Breedte:	64.3 mm
Diepte:	25.7 mm
Hoogte:	91.7 mm
Snoerlengte:	- m
Gewicht verpakking:	560 g
Breedte verpakking:	214 mm
Diepte verpakking:	164 mm
Hoogte verpakking:	55 mm
Type verpakking:	Doos
Land van herkomst:	Taiwan
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	IEC 61000, RoHS; CE (Europe); REACH; FCC (USA)
Materiaal:	Aluminium
Duurzaamheidscertificaten:	CE, Federal Communications Commission (FCC), REACH, RoHS
Temperatuur bij opslag:	-15 - 50 °C
Luchtvochtigheid bij opslag:	0 - 80 procent
(Buitenste) hoofdverpakking hoogte:	175 mm
(Buitenste) hoofdverpakking breedte:	573 mm
(Buitenste) hoofdverpakking brutogewicht:	5900 g
(Buitenste) hoofdverpakking lengte:	227 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)
Overdrachtssnelheid:	10 Gbit/s
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 80 procent
Code geharmoniseerd systeem (HS):	8525.50.3035
Surge energy rating:	- J
Aantal AC uitgangen:	0 AC-uitgang(en)
Nominale input voltage:	- V