Tripp Lite B020-U08-19-IP Handleiding

Tripp Lite Niet gecategoriseerd B020-U08-19-IP

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite B020-U08-19-IP (64 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/64

Owner’s Manual

Console KVM Switch

with IP Access

Models: B020-U08-19-IP, B020-U16-19-IP

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1. FCC Information 3

2. User Notice 3

3. Package Contents 3

4. Introduction 3

34.1 Overview

44.2 Features

4.3 System Requirements 4

4.3.1 Optional External Console 4

4.3.2 Computers 4

4.3.3 Remote Console 4

4.3.4 Supported Browsers 4

4.3.5 Cables 4

4.3.6 Operating Systems 5

4.4 Components 5

4.4.1 Front View 5

4.4.2 Rear View 6

5. Installation 7

5.1 General Safety Instructions 7

5.2 Standard Rack Mounting 8

5.3 Grounding 8

5.4 LCD OSD Conﬁguration 8

5.5 Single-Station Installation 9

5.6 Multiple Station (Daisy-Chained) Installation 9

5.7 Network Setup-IP Address Conﬁguration 10

5.7.1 Local Console 10

5.7.2 IP Installer 10

5.7.3 Browser/Non-Browser Client 11

5.7.4 Changing the Super Administrator Login 11

6. KVM Operation 12

6.1 Sharing USB Peripheral Devices 12

6.2 Powering Off and Restarting 12

6.3 Local Console Login 12

6.4 Local Console Port Access 13

6.4.1 Local Console OSD Invocation Sequence 13

6.4.2 Local Console OSD Navigation 13

6.4.3 Local Console OSD Main Screen Headings 13

6.4.4 Local Console OSD F1 GOTO Function 13

6.4.5 Local Console OSD F5 Skip Function 13

6.4.6 Local Console OSD F6 Broadcast Mode (BRC) 14

6.4.7 Local Console OSD F7 Auto Scan Function 14

6.4.8 Local Console OSD F8 Logout Function 14

6.4.9 Local Console Pushbuttons 14

6.4.10 Local Console Hotkey Commands 14

6.5 Logging Into the KVM over IP 16

6.5.1 Browser Login 16

6.5.2 Windows Client Login 17

6.5.3 AP Java Client Login 18

6.6 Remote Session Operation 19

6.6.1 Control Panel 19

6.6.2 The OSD Toolbar 25

6.6.3 Auto Scanning 26

7. Administration 27

7.1 Local Console OSD 28

7.1.1 Local Console OSD F2 LIST Function 28

7.1.2 Local Console OSD F3 Settings (SET) Page 28

7.1.3 Local Console OSD F4 Administration 30

(ADM) Page

7.1.4 Local Console Firmware Upgrade 31

7.2 OSD Operation 32

7.2.1 OSD Main Page 32

7.2.2 OSD Tab Bar 33

7.2.3 Port Access 33

7.2.4 Connections 34

7.2.5 Favorites 37

7.2.6 User Preferences 38

7.2.7 Sessions 38

7.2.8 Access 39

7.2.9 Port Conﬁguration 40

7.2.10 User Management 41

7.2.11 Device Management 44

7.2.12 Device Information 44

7.2.13 Operating Mode 44

7.2.14 Network 45

7.2.15 Advanced Network Management Settings 46

7.2.16 Security 52

7.2.17 Date/Time 55

7.2.18 Log 56

7.2.19 Maintenance 57

7.2.20 Download 58

7.3 Log Server 59

8. Speciﬁcations 62

8.1 OSD Default Settings 62

8.2 Keyboard Emulation 63

9. Warranty and Product Registration 64

Table of Contents

1. FCC Information

2. User Notice

3. Package Contents

This is an FCC Class A product. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded cables

and connectors with this equipment. Any changes or modiﬁcations to this equipment not expressly approved by Tripp Lite could void the user’s

authority to operate this equipment.

All information, documentation, and speciﬁcations contained in this manual are subject to change without prior notiﬁcation by the manufacturer.

The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and speciﬁcally

disclaims any warranties as to merchantability or ﬁtness for any particular purpose. Any of the manufacturer’s software described in this manual

is sold or licensed “as is.” Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or

its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in

the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modiﬁcations to this device. It is

the responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not

selected prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.

This package consists of:

• Console KVM Switch with Built-in IP

• 6 ft. USB/PS2 Combo KVM Cable Kits (x2)

• USB/PS2 Combo Console Cable Kit

• Grounding Wire

• RJ11 to DB9 Firmware Upgrade Cable

• Rackmount Hardware

• C13 to 5-15P Power Cord

• CD with Owner’s Manual and Device Files

Check to make sure that all of the components are present and in good order. If anything is missing, or was damaged in shipping, contact your

dealer.

Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the switch or to any other

devices on the installation.

4.1 Overview

4. Introduction

The NetDirector Console KVM Switch with IP Access is a control unit

that allows secure access to multiple computers from a single KVM

(keyboard, video, and mouse) console. It consists of an integrated

LCD monitor, keyboard, and touchpad in a 1U rack-mountable

housing.

The NetDirector Console KVM Switch with IP Access features IP-based

connectivity that allows multiple remote operators to concurrently

monitor the computers on your installation. It uses TCP/IP for its

communications protocol, allowing it to be accessed from any

computer on the LAN, WAN, or Internet – whether that computer is

located down the hall, down the street, or halfway around the world.

Remote

Optional External Console

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	B020-U08-19-IP
Kleur van het product:	Zwart
Gewicht:	13360 g
Breedte:	480.1 mm
Diepte:	689.1 mm
Hoogte:	43.9 mm
Gewicht verpakking:	18000 g
Breedte verpakking:	665 mm
Diepte verpakking:	830.1 mm
Hoogte verpakking:	130 mm
AC-adapterfrequentie:	50 Hz
AC-adapter ingangsspanning:	100 - 250 V
Beeldscherm:	LCD
Beeldschermdiagonaal:	19 "
Land van herkomst:	Taiwan
Afmetingen verpakking (BxDxH):	825.5 x 662.94 x 127 mm
Certificering:	UL 60950-1 (USA), CAN/CSA (Canada), FCC 15 A, CE, IEC 60950-1, UL, cUL, CE, FCC
Interface:	PS2
On Screen Display (OSD):	Ja
Temperatuur bij opslag:	-20 - 60 °C
Gewicht (imperiaal):	31 lbs
(Buitenste) hoofdverpakking hoogte:	130 mm
(Buitenste) hoofdverpakking breedte:	665 mm
(Buitenste) hoofdverpakking brutogewicht:	18000 g
(Buitenste) hoofdverpakking lengte:	830.1 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 80 procent
Ingebouwde KVM schakelaar:	Ja
Aantal KVM schakelaar ports:	8
Hoogte (in Rack Units):	1