Tripp Lite AVS5D Handleiding

Tripp Lite Niet gecategoriseerd AVS5D

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite AVS5D (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Automatic Voltage

Switch

Model: AVS5D

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Introduction

The AVS5D is a 5 amp rated automatic voltage switch that protects appliances

from high voltages, low voltages (including brownouts), power surges, spikes and

lighting. It does this by switching off connected equipment if the power ﬂowing to it

goes outside preset limits, and will reconnect automatically when power returns to

normal (except in the case of an overload condition). There will be a delay before

the reconnection to ensure power stability.

14-01-269-933302.indd 1 2/6/2014 2:33:58 PM

Product Overview

1 BS 1363 Plug Connects to wall outlet.

2 BS 1363 Outlet Connects to appliance plug.

3 F1 & F2 Program Buttons Using the two buttons, you can set the output

over/under voltage, overload protection value, browse settable parameters and

change digital display mode. During normal operation, you can press F2 to

display the load. After 3 seconds, the switch returns to the voltage display.

5 Voltage LED Illuminates when the digital display shows voltage.

6 Load LED Illuminates when the digital display shows the load in watts.

14-01-269-933302.indd 2 2/6/2014 2:33:58 PM

Product Overview

7 Digital Display Shows voltage, wattage, status and settings.

A) U-H Output Overvoltage Protection Status

When output voltage exceeds the preset limit and doesn’t return to within

the preset limits after 1 second, your equipment will be disconnected by

the switch. U-H will ﬂash on the display every .5 seconds as long as the

overvoltage condition exists.

B) U-L Output Undervoltage Protection Status

When output voltage goes lower than the preset limit and doesn’t return to

within the preset limits after 1 second, your equipment will be disconnected

by the switch. U-L will ﬂash on the display every .5 seconds as long as the

undervoltage condition exists.

C) P-H Overload Protection Status

When the load exceeds the preset range (nominally 110-120%) and lasts

longer than 6 seconds (within this 6 seconds no action will be taken by the

AVS5D), the switch will disconnect from power. P-H will ﬂash on the display

every .5 seconds as long as the overload condition exists.

When the load exceeds the preset range (nominally 150%) and lasts longer

than 1 second, the switch will disconnect from power. P-H will ﬂash on the

display every .5 seconds as long as the overload condition exists.

Overload Faults - You must power cycle the unit to restore the current ﬂow.

The unit does not reset automatically from this type of fault.

D) Start Up Delay

When ﬁrst powered up, the unit will count down a set number of seconds

(default is 6) before monitoring voltage.

E) Parameter Setting Codes

E-0 Delay setting

E-1 Undervoltage protection value setting

E-2 Overvoltage protection value setting

E-3 Overload protection value setting

E-4 Displays output voltage or loading power value after startup

(U= voltage, P= watts)

E-5 Restores default settings

Note: The code and value ﬂash alternately every second while changing settings.

14-01-269-933302.indd 3 2/6/2014 2:33:58 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	AVS5D
Kleur van het product:	Wit
Breedte:	64 mm
Diepte:	47.8 mm
Hoogte:	132.1 mm
Gewicht verpakking:	180 g
Breedte verpakking:	85.9 mm
Diepte verpakking:	66 mm
Hoogte verpakking:	134.9 mm
Certificering:	CE
Materiaal:	Kunststof
Duurzaamheidscertificaten:	RoHS
Stekker:	Type G (BS 1363)
(Buitenste) hoofdverpakking hoogte:	205 mm
(Buitenste) hoofdverpakking breedte:	330.2 mm
(Buitenste) hoofdverpakking brutogewicht:	6530 g
(Buitenste) hoofdverpakking lengte:	415 mm
Hoeveelheid per (buitenste) hoofdverpakking:	36 stuk(s)
Aantal producten inbegrepen:	1 stuk(s)
Surge energy rating:	190 J
Aantal AC uitgangen:	1 AC-uitgang(en)
Nominale input voltage:	220-230 V
Stopcontacttypes:	BS 1363