Trendnet TC-NT2 Handleiding

Trendnet Niet gecategoriseerd TC-NT2

Lees hieronder de 📖 handleiding in het Nederlandse voor Trendnet TC-NT2 (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

ENGLISH

Install the battery

RJ-11/RJ-45 Cable Test

1. Slide the cover off the TC-NT2 transmitter.

2. Connect and insert the battery.

3. Slide the cover back on to the TC-NT2 transmitter.

1. Connect one end of an RJ-11 or RJ-45 cable to the remote port on the TC-NT2

transmitter. Connect the other end of the RJ-11 / RJ-45 cable to the loopback

port on the TC-NT2 transmitter.

2. Switch the power button to the “On” position.

3. Press the auto (automatic) or test (manual) button.

POWER / TONE

OFF / ON

TC-NT2

TRANSMITTER

AUTO

TEST

ENGLISH

POWER / TON E

OFF / ON

TC-NT2

TRANSMITTER

AUTO

TEST

Remote Testing

Note:

Do NOT use the TC-NT2 for live wire testing. The TC-NT2 is for testing cables only.

Do not connect the TC-NT2 to an Ethernet cable that is connected to a switch,

router, computer, etc. Doing so will damage the device. Ensure the cable being

tested is not connected to a live device.

RJ-45 Cable

1. Connect one end of a RJ-45 cable to the TC-NT2 transmitter. Connect the other

end of the RJ-45 cable into the wall jack.

2. Connect one end of a network cable to the remote port on the TC-NT2 remote

terminator. Connect the other end of the network cable into the patch panel in

your wiring closet.

3. Push the power button on the TC-NT2 transmitter to the “On” position.

4. Press the auto (automatic) or test (manual) button.

TC-NT2

REMOTE

TERMINATOR

Wall Jack

Patch Panel

2 1

4 3

Product specificaties

Merk:	Trendnet
Categorie:	Niet gecategoriseerd
Model:	TC-NT2
Kleur van het product:	Blue, White
Gewicht:	108 g
Stroomvoorziening:	DC 9V
LED-indicatoren:	Ja
Ondersteund aantal accu's/batterijen:	1
Maximale afstand:	300 m
Bedrijfstemperatuur (T-T):	0 - 45 °C