TP Link TL-POE170S Handleiding

TP Link Niet gecategoriseerd TL-POE170S

Lees hieronder de 📖 handleiding in het Nederlandse voor TP Link TL-POE170S (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 241 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Installation Guide

Note:

1. The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP and PoE IP Phone through an Ethernet cable.

2. For TL-POE170S, plug the product into the wall outlets with earthing connection through the power supply cord.

PoE Injector

Connection

IP Camera AP IP Phone

Powered Device (PD)

PWR PWR+DATA OUT DATA IN

Ethernet Device

(switch, router, etc.)

PoE+ Injector

Note:

For simplicity, we will take TL-POE160S for example in this Guide.

LED Explanation

On: Power on

O: Power o

PWR

On: Normal power supply

O: No powered device connected

Flashing: Abnormal power supply

PoE (Only for TL-POE170S)

7106509317 REV1.1.0

Yes. All RJ45 ports of the PoE injector support 10/100/1000 Mbps.

Q1. Can the PoE injector supply power to a PoE device which

doesn’t have a gigabit PoE port?

A1: Ensure the PD is PoE-compliant and its connecting port supports the PoE

function.

A2: Ensure the power consumption of the PD doesn’t exceed the maximum

power supply of the PoE injector, otherwise the overload protection of the

PoE injector will be activated. The quality and length of the Ethernet cable

may inuence the reception of the power supply.

Q2. What can I do if my PoE injector doesn’t supply power to

the powered device or the supplied power is unstable?

FAQ

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs on the product guides, welcome

to email techwriter@tp-link.com.cn.

To ask questions, find answers, and communicate with TP-Link users or

engineers, please visit https://community.tp-link.com to join TP-Link

Community.

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need

service, please contact us.

Do not use any other chargers than those recommended.

Do not use damaged charger or USB cable to charge the device.

The socket-outlet shall be installed near the equipment and shall be easily

accessible.

Please read and follow the above safety information when operating the device.

We cannot guarantee that no accidents or damage will occur due to improper

use of the device. Please use this product with care and operate at your own

risk.

Specications

Operating Temperature TL-POE160S: 0 C to 40 C (32 F to 104˚ ˚ ˚ ˚F)

TL-POE170S: 0 C to 45 C (32 F to 113˚ ˚ ˚ ˚F)

Storage Temperature -40˚C to 70˚C (-40˚F to 158˚F)

Storage Humidity 5% to 90% RH non-condensing

Operating Humidity 10% to 90% RH non-condensing

Environmental and Physical Specifications

Ports

IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af,

IEEE 802.3at

IEEE 802.3bt (Only for TL-POE170S)

Standards

TL-POE160S: PWR

TL-POE170S: PWR, PoE

UTP/STP of Cat. 5 or above (based on the standards

that the connected devices comply with)

LED

Cable Type

General Specifications

10/100/1000 Mbps RJ45 DATA IN Port

10/100/1000 Mbps RJ45 PWR+DATA OUT Port

AC 100–240 V 50/60 Hz Power Input Port

Dimensions

(L×W×H)

TL-POE160S: 125×59.4×36.8 mm

TL-POE170S: 154.7×70×42 mm

Wall

Mountable Yes

TL-POE160S: 30 W

TL-POE170S: 60 W

Maximum

Power Supply

TL-POE170S: 102 mm

Distance Between

Mounting Holes

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of directives 2014/30/EU,

2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at

https://www.tp-link.com/en/support/ce.

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of the Electromagnetic

Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations

2016.

The original UK Declaration of Conformity may be found at

https://www.tp-link.com/support/ukca

BSMI Notice

安全諮詢及注意事項

請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。

清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。

注意防潮，請勿將水或其他液體潑灑到本產品上。

插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。

請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。

請不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。

此為甲類資訊技術設備，于居住環境中使用時，可能會造成射頻擾動，在此種情況下，使用者會被要求採取某些適當的

對策。

限用物質含有情況標示聲明書

產品元件名稱

PCB

外殼

電源供應器

限用物質及其化學符號

備考1： "○"系指該項限用物質之百分比含量未超出百分比含量基準值。

備考2： " - " 系指該項限用物質為排除項目。

○ ○ ○ ○ ○

鉛

○

鎘

○

汞

○

六價鉻

Cr+6

○

多溴聯苯

PBB

○

多

溴二苯醚

PBDE

○

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et

Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux

deux conditions suivantes :

1) L’appareil ne doit pas produire de brouillage;

2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le

fonctionnement.

この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがあります。こ

の場合には使用者が適切な対策を講ずるよう要求されることがあります。

VCCI-A

Explanation of the symbols on the product label

AC voltage

Indoor use only

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment

(WEEE). This means that this product must be handled pursuant to European directive

2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer

when he buys a new electrical or electronic equipment.

Polarity of output terminals

Energy eciency marking (level VI)

Class II equipment

Caution

Operator’s manual

Responsible party:

TP-Link USA Corporation

Address: 110 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the

applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the

equipment is properly maintained and operated.

Issue Date: 2021.7.23

Product Name: PoE Injector

Model Number: TL-POE160S/TL-POE170S

FCC compliance information statement

This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user

may be required to take adequate measures.

CE Mark Warning

CAN ICES-3 (A)/NMB-3(A)

Industry Canada Statement

To mount the device on a wall, use 2 screws which complies with ANSI B1.1 4#, (5#), 6# standard and are more than 7 mm

in length. When the screws are xed on the wall, the distance between the screw head and the wall should be more than

1.5 mm.

Product specificaties

Merk:	TP Link
Categorie:	Niet gecategoriseerd
Model:	TL-POE170S
Kleur van het product:	Zwart
Breedte:	155 mm
Diepte:	70 mm
Hoogte:	42 mm
Certificering:	FCC, CE, RoHS
Plug and play:	Ja
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3bt,IEEE 802.3i,IEEE 802.3u
Temperatuur bij opslag:	-40 - 70 °C
Luchtvochtigheid bij opslag:	5 - 90 procent
Ethernet interface type:	Gigabit Ethernet
Ophangsysteem voor aan de muur:	Ja
Power over Ethernet (PoE):	Ja
RJ-45 uitgang ports:	1
RJ-45 invoer ports:	1
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Aantal producten inbegrepen:	1 stuk(s)
Code geharmoniseerd systeem (HS):	85044090
Ondersteundende kabel types:	Cat3,Cat4,Cat5,Cat5e,Cat6