TP Link Tapo C400S2 Handleiding

TP Link Fotocamera Tapo C400S2

Lees hieronder de 📖 handleiding in het Nederlandse voor TP Link Tapo C400S2 (3 pagina's) in de categorie Fotocamera. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

*Images may dier from your actual product.

03 / Set Up Hub

and Camera

1. Get the Tapo app from the App Store or

Google Play.

1. Twist anti-clockwise and then pull to remove

the cover of the camera. Insert the battery.

Note:

1. Charge the battery before use. It will take about 5~6 hours.

2. If you want to use the camera while charging the battery, we

recommend purchasing another battery for your convenience.

2. Align the indicator line on the cover with the

arrow icon on the camera body.

Press and rotate clockwise to the lock position

to replace the cover.

2. Follow the instructions in the Tapo app to set

up your hub.

3. Follow the instructions in the Tapo app to set

up your camera.

05 / Mount

to the Wall

04 / Installation

Options

Stick the mounting template

to the desired mounting

place. Drill 3 holes according

to the template.

1. Drill HolesOption 1. Set on a Table

Install

Option 2. Mount to the Wall

01 / Charge the

Battery

Method 2: Battery Inside Camera

*Check the battery status in the Tapo app after setup.

02 / Insert the

Battery

2. Install the Bracket

Insert three anchors into

the holes and use the

screws to ax the bracket

over the anchors.

3. Install the Camera

Install the camera on the

mounting bracket, and

adjust the camera angle.

Rotate to secure

the bracket

Rotate after installing

Rotate to secure

the bracket

Rotate after installing

Install

5V USB Charger

RES

SYNC

Solid amber

Solid green

Method 1: Battery

5V USB Charger

Charging:

Fully charged:

Closed

Open

Smart Wire-Free Security

Camera System

Quick Start Guide

• Do not use damaged charger or USB cable to charge the device.

• Do not use any other chargers than those recommended.

• Do not use the device where wireless devices are not allowed.

• Adapter shall be easily accessible.

• Use only power supplies which are provided by manufacturer and in

the original packing of this product. If you have any questions, please

don't hesitate to contact us.

• Keep the device away from re or hot environments. DO NOT

immerse in water or any other liquid.

• Do not disassemble, repair or modify the product.

• Do not place near automatically controlled devices such as re

alarms. Radio waves emitted from this product may cause such

devices to malfunction resulting in an accident.

• Observe restrictions on using wireless products in fuel depots,

chemical plants or when blasting operations are in progress.

• Do not use liquid to clean the product. Only use a dry cloth.

• Never put metal objects inside the product. If a metal object enters

the product turn o the circuit breaker and contact an authorised

electrician.

• This product is not intended to be used when providing medical care.

Consult the manufacturer of any personal medical devices, such as

pacemakers or hearing aids to determine if they are adequality

shielded from external RF (radio frequency) energy.

• Do not use this product in health care facilities. Hospitals or health

care facilities may be using equipment that could be sensitive to

external RF energy.

• Do not place heavy objects on top of the product.

• When you leave the product unused for a long time unplug the

product from the power outlet.

• Product should be kept away from heat sources such as radiators,

cookers etc. - it should not be placed in places where the

temperature is less than -20 degrees or greater than 45 degrees.

• This product may interfere with other electronic products such as TV,

radios, personal computers, phones or other wireless devices.

• Always follow the local waste and recycle laws when you get rid of the

used battery.

TP-Link hereby declares that the device is in compliance with the

essential requirements and other relevant provisions of directives

2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at

https://www.tapo.com/support/ce/

TP-Link hereby declares that the device is in compliance with the

essential requirements and other relevant provisions of the Radio

Equipment Regulations 2017.

The original UK declaration of conformity may be found at

https://www.tapo.com/support/ukca/

Camera Appearance Hub Appearance Light Indications

Hub Status LED

Solid amber

Blinking red quickly

Solid red

Solid green

Blinking green quickly

Starting up

Connected to the cloud

Connected to router

Hub resetting

Hub updating

Blinking red and green Ready for setup

Blinking green slowly Pairing

Camera Status LED

Blinking red and green

Solid Red

Blinking red once a minute

Blinking green quickly Camera updating

Blinking red quickly Camera resetting

Ready for pairing

Pairing

Blinking red slowly

Blinking green slowly

Solid green Connected to the cloud

Solid amber Connected to the hub

Starting up

Low battery

Oine

CAUTION!

Avoid replacement of a battery with an incorrect type that can

defeat a safeguard.

Avoid disposal of a battery into re or a hot oven, or

mechanically crushing or cutting of a battery, that can result in

an explosion.

Do not leave a battery in an extremely high temperature

surrounding environment that can result in an explosion or the

leakage of ammable liquid or gas; Do not leave a battery

subjected to extremely low air pressure that may result in an

explosion or the leakage of ammable liquid or gas.

CAUTION!

Risk of re or explosion

if the battery is replaced by an incorrect type

Safety Information

Camera Operating Temperature: -20 °C ~ 45°C (-4°F ~ 113°F)

Camera Operating Humidity: 10%~90%RH, Non-condensing

Hub Operating Temperature: 0 °C ~ 40°C (32°F ~ 104°F)

Hub Operating Humidity: 10%~90%RH, Non-condensing

Please read and follow the above safety information when

operating the device. We cannot guarantee that no accidents or

damage will occur due to improper use of the device. Please use

this product with care and operate at your own risk.

For technical support, user guides,

FAQs, warranty and more, please visit

www.tapo.com/support/

▲microSD card not included.

1SYNC Button

Press to pair with the camera, or silence the hub when it rings.

2RESET

Use a pin to press and hold for about 5 seconds until the hub

LED quickly blinks red to reset the hub.

3microSD Card Slot

Insert a microSD card to record camera videos locally.

Initialize the microSD card within the Tapo app rst.

4Status LED

Indicate the status of your hub.

Indicate the status of your camera. While the camera is powered on:

Front Back

Micro SD

1 2 3

3Motion Sensor

4Status LED

2Light Sensor

Lens

5Microphone

SYNC/RESET Button

Press for 1 second: Pair with the hub

Press and hold for about 5 seconds: Reset the camera

RES

SYNC

42 5

Product specificaties

Merk:	TP Link
Categorie:	Fotocamera
Model:	Tapo C400S2
Kleur van het product:	Black, White
Breedte:	64.2 mm
Diepte:	110.6 mm
Hoogte:	64.2 mm
Soort:	IP-beveiligingscamera
Internationale veiligheidscode (IP):	IP65
Bluetooth:	Nee
Maximale capaciteit van de geheugenkaart:	256 GB
Wi-Fi-standaarden:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Stemcodecs:	G.711
Vormfactor:	Rond
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad en draadloos
Ethernet LAN:	Ja
Montagewijze:	Muur
Ondersteunde video-modi:	1080p
Maximum resolutie:	1920 x 1080 Pixels
Totaal aantal megapixels:	- MP
Videocompressieformaten:	H.264
Type stroombron:	AC, Battery
Aantal cameras:	2
Meegeleverde kabels:	LAN (RJ-45), USB
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash)
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
LED-type:	IR
Infrarood wavelength:	850 nm
Vaste focale lengte:	3.15 mm
Video bewegings-detectie:	Ja
Audiosysteem:	2-weg
Ingebouwde luidsprekers:	Ja
Omvang optische sensor:	1/3 "
Ingebouwde microfoon:	Ja
Temperatuur bij opslag:	-20 - 60 °C
Maximaal 30 frames per seconde:	15 fps
Ondersteunde netwerkprotocollen:	TCP/IP, ICMP, DNS, HTTPS, TCP, UDP
Luchtvochtigheid bij opslag:	5 - 90 procent
Dag/nacht modus:	Ja
Aantal lenzen:	1
Maximum aperture number:	2
Nachtkijker afstand:	15 m
Wifi:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Bedrijfstemperatuur (T-T):	-20 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Montagesjabloon:	Ja