TP Link KS200 Handleiding

TP Link Niet gecategoriseerd KS200

Lees hieronder de 📖 handleiding in het Nederlandse voor TP Link KS200 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 232 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Wire Your Switch
Disconnect wires from the old switch.
Turn o the circuit breaker. Then remove
the old wallplate of the wall switch and
label the wires.
1
2
Connect the wires to the smart switch as
shown below.
Note: No need to distinguish between and wires.Line Load
3
Ground: Usually green or copper.
Neutral: Usually white, not connected to the dumb switch.
Line/Load: Usually black, and connected to the dumb
switch.
If you are unsure, consult a qualied electrician.
Line up the switch with the mounting
holes. Secure it with screws.
4Attach the wallplate. Then the wiring is
nished.
5
Set Up Your Switch
STEP 2 SET UP
Tap the button in the app and select Smart
Switches > Smart Switch HomeKit. Then
follow the step-by-step app instructions to set
up your smart switch.
DOWNLOAD APP
Get the app from the App Store Kasa Smart
or Google Play.
STE 1P
OR
7106509783 REV1.1.0 ©2022 TP-Link
Smart Wi-Fi Light Switch
Quick Start Guide
*Images may dier from your actual product.
Appearance Button Explanations
Restart
Reset
Press and hold for about until the LED 5s
blinks amber and green to reset Wi-Fi
while keeping other settings.
Press to restart your switch.
Press and hold for about until the 10s
LED blinks amber to restore to factory
default settings.
LED Status
Starting up.Solid amber
Blinking amber
Blinking green
White
Solid red
Stay green for 30s
Blinking amber & green
Connecting to Wi-Fi.
Device resetting.
Light fixture is off.
Disconnected from Wi-Fi.
Connected to Wi-Fi.
On/O
Button
Restart
LED
Reset
Want to Add Switch to Home?
This is a HomeKit-enabled device. You can also
add it to the Home app for easy control from
your iPhone or iPad.
Failed to Add to Home?
Factory reset the switch, and restart your phone.
Then try again.
Refer to the FAQ for detailed instructions:
https://www.tp-link.com/support/faq/3390/
Before You Start:
1. Your phone should be connected to a stable 2.4
GHz Wi-Fi network with internet access.
2. HomeKit will be disabled 10 minutes after the
switch is powered on. You can press the Restart
button on your switch to restart and try again.
Add to Home
1. Open the Home app.
2. Scan the HomeKit QR code in the package, or
enter the PIN on the switch.
Specications
Safety Notice
Before installing, servicing or removing the switch, read and follow all safety
precautions including the following:
• CAUTION – Risk of Electric Shock – More than one disconnect switch may
be required to de-energize the equipment before servicing. A circuit breaker
which disconnects the Line and Neutral conductor simultaneously is suitable.
Ensure power is o at the circuit breaker before removing or installing any
switch. Use a non-contact voltage tester to ensure the power is o.
• The Smart Switch must be installed and used in accordance with the
National Electric Code (NEC) or your local electrical code. If you are
unfamiliar with these codes and requirements, or are uncomfortable
performing the installation, consult a qualied electrician.
• Do not install the Smart Switch with wet hands or when standing on wet or
damp surfaces.
• Install only in a suitable UL Listed outlet box (suitable dimensions:
H > 2.95 in./75 mm, W > 1.81 in./46 mm, D > 2 in./51 mm).
Rating: 120V~ 60Hz
Load: 600W Incandescent, 1/6 HP Motor
Operation temperature: 0~40℃
Method of mounting included: Independently mounted
(Vertically position only);
Operating control, Type 1.C action
Pollution Degree 2, Rated Impulse Voltage 2500 V
Software Class A, NEMA Type 1
High Voltage-Disconnect power supply before servicing
CAUTION
For technical support, the user guide and other information, visit
https://www.tp-link.com/support.
Support
Ready for setup;
Resetting Wi-Fi.

Product specificaties

Merk: TP Link
Categorie: Niet gecategoriseerd
Model: KS200

Heb je hulp nodig?

Als je hulp nodig hebt met TP Link KS200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd TP Link

TP Link

TP Link EAP653 UR Handleiding

12 November 2024
TP Link

TP Link LS1210P Handleiding

11 November 2024
TP Link

TP Link Archer TBE400UH Handleiding

11 November 2024
TP Link

TP Link Tapo P210 Handleiding

11 November 2024
TP Link

TP Link Deco S1900 Handleiding

30 Juli 2024
TP Link

TP Link Deco BE25 Handleiding

3 Juli 2024
TP Link

TP Link Omada ES205GP Handleiding

3 Juli 2024
TP Link

TP Link Archer TXE50UH Handleiding

10 Juni 2024
TP Link

TP Link EP40M Handleiding

10 Juni 2024
TP Link

TP Link Deco BE75 Handleiding

10 Juni 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo VAVE-P17-TP-5YL1-P Handleiding

21 November 2024
Festo

Festo SD-SUB-D-BU9 Handleiding

21 November 2024
Festo

Festo SAMH-F12-MK Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024