TP Link Archer Air R5 Handleiding

TP Link Router Archer Air R5

Lees hieronder de 📖 handleiding in het Nederlandse voor TP Link Archer Air R5 (3 pagina's) in de categorie Router. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem,
connect the router’s WAN port to it, then follow steps 3 and 4 to complete the hardware
connection.
Unplug the power to turn o your modem, if any, and
remove the backup battery if it has one.
Modem
Unplug the power
Power on the modem, and then wait
about for it to restart.2 minutes
2
Mount the Router on the Wall
Method TWO: Via mounting bracket
Method ONE: Via 3M Adhesives*
3
1. Mount the bracket on the wall in the
correct direction with the two provided
anchors and screws.
2. Attach the router on the bracket as shown
below.
2. Adhere the router vertically to a flat
surface that is out of children’s reach.
3M Adhesives
CAUTION:
3M adhesives may
damage the wall or leave
adhesive residue on the
wall when removed.
Caution, Hot Surface
The device should be used within a temperature range of 0°C-40°C.
When the router is working, the temperature on its back is high. Do not touch the router with bare hands, and do not stick or directly mount the
router to wallpaper, paper, wood, glass, non-heat-resistant paint, foam board, flammable and explosive materials, etc, to avoid burns,
discoloration, breakage or other accidental injury.
The back area of the router is used for heat dissipation. It works best when the router is mounted
on a wall.
It is recommended to mount the router to flat and smooth painted walls, tile walls, and other objects. Do not stick it on metal surfaces, so as not
to shield the wireless signal.
1. Tear off the protective paper from the
3M adhesives on the back of the
router.
*2 extra 3M adhesives are
provided for future use. Tip: You can use the included
spirit level to help install the
bracket horizontally.
The air bubble in the
level is centered.
UP
Anchor
Screw
UP
UP
Scan for Tether Tether
or
Choose Your Device Type
Gaming Router
Range Extender
Wireless Router
To enjoy a more complete service from TP-Link,
bind your TP-Link ID to the router.
Set Up the Network
1. Connect your device to the router wirelessly
or with an Ethernet cable.
Let’s Get Started
http://tplinkwiîž®.net
Method TWO: Via a Web Browser
2. Launch a web browser, and enter
http://tplinkwifi.net or http://192.168.0.1 in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.
Note: If the login window does not appear, please refer to Q1 of
Need Help? in this guide.
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
2. Open the Tether app and log in with your
TP-Link ID.
3. Tap the button in the Tether app and
select Wireless Router > Standard
Routers. Follow the steps to complete
the setup and connect to the internet.
Note: If you don’t have an account, create one first.
The default wireless network names (SSIDs) and password
are printed on the label at the back of the router.
2
On (red or blue)
JOIN PRESET WI-FI
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
QR
Code
Connect the router to a power source
via the provided power adapter.
3
Connect the Hardware
*Image may dier from actual product.
Verify the LED is solid red or blue before moving on.
4
1
Connect the powered-off
modem to the router’s WAN
port with an Ethernet cable.
Internet
1
LAN WAN
WPS Button Note: This equipment shall
be installed at a height of
less than 2 meters.
Quality of Service (QoS)
Prioritize your bandwidth
needs for a better network-
ing experience.
Parental Controls
Manage online time and block
inappropriate content to to
maintain healthy online habits.
Network Protection
Detects cyber threats to keep
your privacy and connected
devices well protected.
Comprehensive Reports
Gain full statistics and insights
to help you know your home
network better.
TP-Link HomeShield premium security services keep your home network safe with
cutting-edge features. Download the Tether app to enjoy.
For more details, visit https://www.tp-link.com/homeshield/.
TP-Link HomeShield
· Keep the device away from water, re, humidity or hot environments.
· Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
· Do not use any other chargers than those recommended.
· Do not use damaged charger or USB cable to charge the device.
· Do not use the device where wireless devices are not allowed.
· Adapter shall be installed near the equipment and shall be easily accessible.
· Do not use the included power adapter to charge other devices.
For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support.
Q1. What should I do if I can’t access the web management page?
•
Reboot your router and try again.
•
If the computer is set to a static IP, change its settings to obtain an IP address automatically.
•
Verify that is correctly entered in the web browser. Alternatively, enter or in the web http://tplinkwifi.net http://192.168.0.1 http://192.168.1.1
browser.
•
Use another web browser and try again.
•
Disable and enable the network adapter in use.
Q2. What should I do if I can’t access the internet?
•
Power off your modem for about 5 minutes, then power it on and check the internet. If your modem has more than one Ethernet port, keep other
ports unconnected.
•
Check if the internet is working normally by connecting a computer directly to the modem via an Ethernet cable. If it is not, contact your internet
service provider.
•
L
og in to the web management page, and go to the page to check whether the internet IP address is valid or not. If it’s valid, go to Network Map
Advanced Network Internet Advanced Settings Use the Following DNS Addresses> > , click , select , set the primary DNS to 8.8.8.8, and set the
secondary DNS to 8.8.4.4. If it is not, check the hardware connection or contact your internet service provider.
•
For cable modem users, log in to the web management page of the router and go to Advanced > Network > Internet > MAC Clone Clone . Select
Current Device MAC and click SAVE. Then reboot both the modem and the router.
Q3. What should I do if I forget my wireless password?
• If you have not changed the default wireless password, it can be found on the label at the bottom of the router.
• Connect a computer directly to the router using an Ethernet cable. Log in to the router’s web management page at , and go to the http://tplinkwi.net
Wireless page to retrieve or reset your wireless password
.
Q4. What should I do if I forget my web management page password?
• If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset it.
• Alternatively, press and hold the Reset button at the bottom for about 6 seconds until the LED blinks. Then visit http://tplinkwifi.net to create a new login
password.
Q5. What should I do if the router does not turn on when connected to a power source?
• Make sure the power source can supply power normally.
• Make sure you are using the included power adapter.
Need Help?
©2023 TP-Link 7106510327 REV1.0.2
AX3000 Wi-Fi 6 Air Router
Quick Installation Guide
LED Explanation
The system is starting up or the router is being
upgraded. Do not disconnect or power o your
router.
The router is working normally.
WPS connection is being established. Do not
disconnect or power o your router.
O
Solid Red
Slowly Pulsing Red
Quickly Pulsing Red
Quickly
Pulsing Blue
Solid Blue
Slowly
Pulsing Blue
The router is not powered on.
WAN port is connected but there is no
internet connection.
WAN port is not connected.
WPS connection failed.
EasyMesh-Compatible
You can experience strong, stable, and seamless wireless connections throughout your
home with EasyMesh.
Flexible Scalability
Flexibly scale your home networking with dierent vendors,* dierent topologies, dierent
Protocols and dierent product categories.
One-Click Settings
Within 2 minutes, press the WPS button on the main router and the satellite device, then the
EasyMesh network is all set up. TP-Link routers in factory settings can be connected to form an
EasyMesh network directly without any redundant setup.
Seamless Roaming
Connects mobile devices to your routers or extenders that provide the best coverage. Devices
compatible with EasyMesh also share a single Wi-Fi name so you stay connected in every room.
For more information, visit https://www.tp-link.com/easymesh/
*Failure may be due to rmware conicts of dierent vendors. A better network
connection can be established between all APs from TP-Link.
Scan for Setup Video


Product specificaties

Merk: TP Link
Categorie: Router
Model: Archer Air R5

Heb je hulp nodig?

Als je hulp nodig hebt met TP Link Archer Air R5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Router TP Link

Handleiding Router

Nieuwste handleidingen voor Router