Total TJSLI8501 Handleiding

Total Zaagmachine TJSLI8501

Lees hieronder de 📖 handleiding in het Nederlandse voor Total TJSLI8501 (13 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

KEYHOLE SAW

Security instructions

Caution

Read all safety warnings and all instructions. Failure to follow all warnings and

instructions may result in electrical shock, fire, and/or serious injury.

The term “power tool” in the warnings refers to your operated (corded) power tool mains-

or battery-operated (cordless) power tool.

Note: Save all warnings and instructions for future reference. Due to our ongoing R&D&I program,

the specifications in this document are subject to change without notice.

1) Work area safety

a. Keep the work area clean and well lit to prevent accidents.

b. Do not use power tools in explosive atmospheres, such as in the presence

of flammable liquids, gases, or dust that can cause fires.

c. Keep children and other unauthorized persons away while using a power

tool. Distractions can cause you to lose control of the tool.

2) Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any way.

Using a suitable plug reduces the risk of electric shock.

b. Avoid bodily contact with grounded surfaces such as pipes, radiators,

ranges, and refrigerators. There is an increased risk of electric shock if

your body is grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electrical shock.

d. Never use the cord to carry, pull or unplug the power tool. Keep the cable

away from heat or oil.

e. When using a power tool outdoors, use an extension cord suitable for

outdoor use.

f. If using the tool in a damp location is unavoidable, use a Residual Current

Device (RCD) protected supply to reduce the risk of electric shock.

3) Personal security

a. Always stay alert, watch what you are doing and use common sense

when using the tool.

b. Do not use a power tool if you are tired or under the influence of

medication or other substances.

c. Wear personal protective equipment. Always wear eye protection.

Protective equipment such as a dust mask, non slip safety shoes, hard -

hat, or hearing protection used in the proper conditions will reduce

personal injury. Also don't wear loose clothing or jewelry.

d. Prevent the tool from turning on unintentionally. Make sure the switch is

in the off position before connecting to power source and moving.

e. Remove any adjusting wrenches or wrenches before turning on the power

tool. An adjustable wrench or wrench placed in a rotating part of the power

tool can cause serious injury.

f. If dust extraction and collection devices (such as a dust mask) are used,

make sure they are connected properly. Properly use these devices and

you will reduce dust related hazards.-

4) Use and care of battery tools

a. Recharge the battery only with the charger specified by the

manufacturer. An unsuitable charger can create a fire hazard.

b. Use power tools only with specifically designated batteries. Use of other

batteries may create a risk of injury or fire.

c. When the batteries are not in use, keep it away from other metal objects,

such as paper clips, coins, keys, nails, screws, or other small metal

objects, that can make a connection from one terminal to another.

Shorting the battery terminals can cause burns or fire.

d. Abusive conditions can cause expulsion of liquid from the battery; avoid

contact. If accidentally contacted, rinse immediately with water. If the

liquid comes into contact with the eyes, also seek medical help. Liquid

expelled from the battery can cause irritation or burns.

e. Do not use a battery or tool that is damaged or modified. They may

exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.

f. Do not expose a battery or tool to fire or excessive heat. Exposure to fire

or temperature above 130°C may cause an explosion.

g. Follow all charging instructions. Do not charge the battery or tool outside

the temperature range specified in the instructions. Improper charging

or charging at temperatures outside the specified range may damage

the battery or increase the risk of fire.

5) Service

a. Have your power tool serviced by a qualified person and use replacement

parts recommended by the manufacturer. This will ensure that the safety

of the power tool is maintained.

b. Never use damaged batteries. Battery packs should only be serviced by

the manufacturer or authorized service providers.

Product specificaties

Merk:	Total
Categorie:	Zaagmachine
Model:	TJSLI8501

Heb je hulp nodig?

Als je hulp nodig hebt met Total TJSLI8501 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Total

Total TS730301 Handleiding

16 December 2024

Total TJSLI8501 Handleiding

16 December 2024

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Turbo-Silent EKS 2040/1 Handleiding

16 December 2024

Bavaria BJS 400 Handleiding

5 December 2024

Bavaria BCS 64/1 Handleiding

5 December 2024

Bavaria BEC 2040 TC Handleiding

5 December 2024

Einhell RT-SB 250 U Handleiding

4 December 2024

Einhell NSMS 4300 ZZ Handleiding

4 December 2024

Einhell RT-TS 2231 UD Handleiding

4 December 2024

Einhell BT-TS 1500 U Handleiding

4 December 2024

Einhell BT-TS 1500 Handleiding

4 December 2024

Einhell BT-TS 2031 Z Handleiding

4 December 2024