Total TAT40342 Handleiding
Total
Schroefmachine
TAT40342
Lees hieronder de 📖 handleiding in het Nederlandse voor Total TAT40342 (8 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
IMPACT GUN 3/4"
EN
EN
2
Security instructions
Caution
Read all safety warnings and all instructions. Failure to follow all warnings and
instructions may result in electrical shock, fire, and/or serious injury.
Note: Save all warnings and instructions for future reference. Due to our ongoing R&D&I program,
this document is subject to change without notice.
General safety guidelines
This product is part of a system and the following safety precautions must high pressure-
be followed at all times along with any other existing safety rules.
1. Please read the manual of this product carefully.
2. You must be thoroughly familiar with the controls and the proper use of the
equipment.
3. Only persons who are thoroughly familiar with these instructions may use the
pneumatic tool.
4. Do not exceed the pressure rating of any system component.
Do not exceed the maximum operating pressure of the air tool (90 PSI). The air
tool could explode and cause serious injury.
5. Disconnect air tool from air supply before changing tools or accessories and
when not in operation.
6. Always wear certified/approved safety glasses and hearing protection while
operating the machine.
7. Do not wear loose clothing or clothing that contains loose fittings or ties, etc.,
which could become entangled in moving parts of the tool and cause serious
personal injury.
8. Do not wear jewelry, watches, IDs, bracelets, necklaces, etc. when using any
tools as they can get caught in moving parts and cause serious injury.
9. Make sure the trigger is not depressed when connecting the air hose. The
machine could be accidentally started.
10. Never pry the tool when it is not applied to a work object. Accessories must be
securely fastened. Loose accessories can cause serious injury.
11. Protect air lines from damage or punctures.
12. Never point an air tool at yourself or another person. Serious injury could occur.
13. Check air hoses for weakness or wear before each use. Make sure all
connections are secure.
14. Keep all nuts, bolts, or screws tight and make sure the equipment is in safe
operating condition.
15. Do not put your hands near or under moving parts.
Caveat
Do not misuse the product, excessive exposure to vibration, work in awkward positions
and repetitive work movements.
16. Keep children and bystanders away during operation of this tool.
17. If the tool is damaged, have it repaired before using it.
18. Do not smoke during use.
19. Always stay alert and attentive to what you are doing. Do not use the product if
you are tired or under the influence of medication or other substances. A moment
of inattention while operating cranes can result in serious personal injury.
EN
3
Important
The warnings mentioned in this manual cannot cover all possible conditions and
situations that may occur. Operators must use common sense and use this tool with
caution to prevent injury.
1) Work area safety
a. accidents. Keep the work area clean and to prevent well lit-
b. Do not use power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust that can cause fires.
c. Keep children and other unauthorized persons away while using a power
tool. Distractions can cause you to lose control of the tool.
2) electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Using a suitable plug reduces the risk of electric shock.
b. Avoid bodily contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electrical shock.
d. Never use the cord to carry, pull or unplug the power tool. Keep the cable
away from heat or oil.
e. When using a power tool outdoors, use an extension cord suitable for
outdoor use.
3) Personal security
a. Always stay alert, watch what you are doing and use common sense
when using the tool.
b. Do not use a power tool if you are tired or under the influence of
medication or other substances.
c. Wear personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non slip safety shoes, hard -
hat, or hearing protection used in the proper conditions will reduce
personal injury. Also don't wear loose clothing or jewelry.
d. Prevent the tool from turning on unintentionally. Make sure the switch is
in the off position before connecting to power source and moving.
4) Service
a. Have your power tool serviced by a qualified person and use replacement
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.
Product specificaties
| Merk: | Total |
| Categorie: | Schroefmachine |
| Model: | TAT40342 |
Heb je hulp nodig?
Als je hulp nodig hebt met Total TAT40342 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schroefmachine Total
16 December 2024
16 December 2024
16 December 2024
Handleiding Schroefmachine
- Schroefmachine Bosch
- Schroefmachine Panasonic
- Schroefmachine AEG
- Schroefmachine DeWalt
- Schroefmachine Basetech
- Schroefmachine Batavia
- Schroefmachine Bavaria
- Schroefmachine Black Decker
- Schroefmachine Bruder Mannesmann
- Schroefmachine Dremel
- Schroefmachine Easymaxx
- Schroefmachine Einhell
- Schroefmachine Elu
- Schroefmachine Fein
- Schroefmachine Ferm
- Schroefmachine Festool
- Schroefmachine Goon
- Schroefmachine Greenworks
- Schroefmachine Gude
- Schroefmachine Hikoki
- Schroefmachine Hitachi
- Schroefmachine Ingersoll Rand
- Schroefmachine Kawasaki
- Schroefmachine Kress
- Schroefmachine Laserliner
- Schroefmachine Makita
- Schroefmachine Maktec
- Schroefmachine Matrix
- Schroefmachine Metabo
- Schroefmachine Milwaukee
- Schroefmachine Parkside
- Schroefmachine Powerfix
- Schroefmachine Powerplus
- Schroefmachine Ryobi
- Schroefmachine Silverline
- Schroefmachine Skil
- Schroefmachine Stanley
- Schroefmachine Toolcraft
- Schroefmachine Toolland
- Schroefmachine Trotec
- Schroefmachine Velleman
- Schroefmachine Vonroc
- Schroefmachine Westfalia
- Schroefmachine Wiha
- Schroefmachine Worx
- Schroefmachine Omega
- Schroefmachine Ozito
- Schroefmachine Black And Decker
- Schroefmachine Steren
- Schroefmachine Urrea
- Schroefmachine Cocraft
- Schroefmachine Meec Tools
- Schroefmachine Senco
- Schroefmachine Genesis
- Schroefmachine Hilti
- Schroefmachine Facom
- Schroefmachine Kraftwerk
- Schroefmachine EMOS
- Schroefmachine Cotech
- Schroefmachine Power Craft
- Schroefmachine Tacklife
- Schroefmachine Truper
- Schroefmachine Fieldmann
- Schroefmachine Mafell
- Schroefmachine Carrera
- Schroefmachine Biltema
- Schroefmachine Porter-Cable
- Schroefmachine Beta
- Schroefmachine Dedra
- Schroefmachine MSW
- Schroefmachine Sthor
- Schroefmachine Craftsman
- Schroefmachine Chamberlain
- Schroefmachine Chicago Pneumatic
- Schroefmachine Alpha Tools
- Schroefmachine Hazet
- Schroefmachine Yato
- Schroefmachine Abac
- Schroefmachine Meister Craft
- Schroefmachine StarTech.com
- Schroefmachine Park Tool
- Schroefmachine Pansam
- Schroefmachine Gedore
- Schroefmachine Netter Vibration
- Schroefmachine SW-Stahl
- Schroefmachine Cleco
- Schroefmachine Einhell Bavaria
- Schroefmachine Prowork
- Schroefmachine Proviel
- Schroefmachine Weidmüller
- Schroefmachine Wera
- Schroefmachine Rodcraft
- Schroefmachine Bavaria By Einhell
- Schroefmachine TAURUS Titanium
Nieuwste handleidingen voor Schroefmachine
9 December 2024
8 December 2024
5 December 2024
5 December 2024
5 December 2024
4 December 2024
4 December 2024
4 December 2024
4 December 2024
4 December 2024