Total TAPLI2001 Handleiding

Total Polijstmachine TAPLI2001

Lees hieronder de 📖 handleiding in het Nederlandse voor Total TAPLI2001 (11 pagina's) in de categorie Polijstmachine. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
BATTERY POLISHER
IT IS
2
Security instructions
Caution
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire, and/or serious injury.
Note: Save all warnings and instructions for future reference. Due to our ongoing R&D&I program,
the specifications in this document are subject to change without notice.
1) Work area safety
a. Keep the work area clean and well lit to prevent accidents.-
b. Do not use power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust that can cause fires.
c. Keep children and other unauthorized persons away while using a power
tool. Distractions can cause you to lose control of the tool.
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Using a suitable plug reduces the risk of electric shock.
b. Avoid bodily contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electrical shock.
d. Never use the cord to carry, pull or unplug the power tool. Keep the cable
away from heat or oil.
e. When using a power tool outdoors, use an extension cord suitable for
outdoor use.
f. If using the tool in a damp location is unavoidable, use a Residual Current
Device (RCD) protected supply to reduce the risk of electric shock.
g. Make sure the mains voltage is the same as the voltage on the tool's
nameplate. Remove plug from outlet before making any adjustments or
servicing.
3) Personal security
a. Always stay alert, watch what you are doing and use common sense
when using the tool.
b. Do not use a power tool if you are tired or under the influence of
medication or other substances.
c. Wear personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non slip safety shoes, hard -
hat, or hearing protection used in the proper conditions will reduce
personal injury. Also don't wear loose clothing or jewelry.
d. Prevent the tool from turning on unintentionally. Make sure the switch is
in the off position before connecting to power source and moving.
e. Remove any adjusting wrenches or wrenches before turning on the power
tool. An adjustable wrench or wrench placed in a rotating part of the power
tool can cause serious injury.
f. If devices are used for dust extraction/collection, make sure they are
properly connected. Use these devices to reduce dust related hazards.
IT IS
3
4) Use and care of power tools
a. Do not force the tool. Use the correct power tool for each use.
b. Do not use the power tool if its power switch does not work. Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
c. Use the power tool, accessories and bits etc. in accordance with these
instructions, taking into account the working conditions and the work to
be carried out. Using this power tool for other than its intended use could
result in a hazardous situation.
d. Store power tools out of the reach of children and do not allow people
unfamiliar with the tool to use it.
e. Keep power tools in good condition. Check for misalignment or binding of
moving parts, breakage of parts, and any other condition that may affect
the operation of power tools. If it is damaged, have the power tool repaired
before using it. Many accidents are caused by poorly maintained power
tools.
5) Battery use and care
a) Recharge the battery only with the charger specified by the manufacturer.
An unsuitable charger can create a fire hazard.
b) Use specifically designated batteries. Use of other batteries may create a
risk of injury or fire.
c) When the batteries are not in use, please keep it away from other metal
objects. Shorting the battery terminals can cause burns or fire.
d) Abusive conditions can cause expulsion of liquid from the battery; avoid
contact. If accidentally contacted, rinse immediately with water. If the
liquid comes into contact with the eyes, also seek medical help. Liquid
expelled from the battery can cause irritation or burns.
e) Do not use a battery or tool that is damaged or modified. They may exhibit
unpredictable behavior resulting in fire, explosion, or risk of injury.
f) Do not expose a battery or tool to fire or excessive heat. Exposure to fire
or temperature above 130°C may cause an explosion.
g) Follow all charging instructions. Do not charge the battery or tool outside
the temperature range specified in the instructions. Improper charging or
charging at temperatures outside the specified range may damage the
battery or increase the risk of fire.
6) Service
a. Have your power tool serviced by a qualified person and use replacement
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.


Product specificaties

Merk: Total
Categorie: Polijstmachine
Model: TAPLI2001

Heb je hulp nodig?

Als je hulp nodig hebt met Total TAPLI2001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Polijstmachine Total

Total

Total TP1141806 Handleiding

16 December 2024
Total

Total TAPLI2001 Handleiding

16 December 2024

Handleiding Polijstmachine

Nieuwste handleidingen voor Polijstmachine