Toshiba TLP-X200 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Toshiba TLP-X200 (53 pagina's) in de categorie Beamer projector. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/53
Before UsingPreparationsOperationsMaintenanceOthers
Network/
USB memory
TLP-X200 (XGA)
TLP-WX200 (WXGA)
DATA PROJECTOR
OWNERā€™S MANUAL
In the spaces provided below, record the Model and Serial No. located at the bottom of
your projector.
Model No . Serial No.
Retain this information for future reference.
2
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufļ¬cient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES
ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING:
USA only
Handling the cord on this product or cords associated with accessories sold with
this product, will expose you to lead, a chemical known to the State of California
to cause birth defects or other reproductive harm. Wash hands after handling.
USA only
Lamp contains mercury. Disposal of this product may be regulated due to
environmental considerations. For disposal, reuse or recycling information,
please contact your local government or the Electronic Industries Alliance at
www.eiae.org.
MODEL NAME: TLP-X200 / TLP-WX200 USA only
TRADE NAME: DATA PROJECTOR MODEL NAME: TLP-X200 / TLP-WX200
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment oļœ— and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Before Using
4
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE
MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.
This unit is fully transistorized and does not contain any parts that can be repaired by the
user.
WARNING: DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE
EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
1. Read Ownerā€™s Manual
After unpacking this product, read
the owner's manual carefully, and
follow all the operating and other
instructions.
2. Power Sources
This product should be operated
only from the type of power source
which does not exceed the voltage
range speciļ¬ed on the rating label
and the power cord.
If you are not sure of the type
of power supply to your home,
consult your product dealer or local
power company.
3. Source of Light
Do not look into the lens while the
lamp is on. The strong light from
the lamp may cause damage to
your eyesight.
4. Ventilation
Openings in the cabinet are
provided for ventilation and to
ensure reliable operation of the
product and to protect it from
overheating. These openings must
not be blocked or covered. Never
block an opening by placing the
product on a bed, sofa, rug or
other similar surface. Do not place
it in a built-in installation such as
a bookcase or rack, unless proper
ventilation is provided.


Product specificaties

Merk: Toshiba
Categorie: Beamer projector
Model: TLP-X200
Gewicht: 2100 g
Stroomvoorziening: AC 100-240 V, 50/60 Hz
Connectiviteitstechnologie: Bedraad
Typische contrastverhouding: 600:1
Projector helderheid: 3000 ANSI lumens
Projectietechnologie: LCD
Projector native resolution: XGA (1024x768)
Keystone correctie, verticaal: 45 Ā°
Frequentiebereik horizontaal: 15 - 106 kHz
Frequentiebereik verticaal: 50 - 85 Hz
Matrix grootte: 0.7 "
Aantal USB 2.0-poorten: 1
VGA (D-Sub)poort(en): 2
Aantal HDMI-poorten: 1
Soort serieƫle aansluiting: RS-232
S-Video ingang: 1
Focus: Handmatig
Levensduur van de lichtbron: 2000 uur
Type lichtbron: Lamp
Aantal ingebouwde luidsprekers: 1
RS-232 port: 1
Lampvermogen: 180 W
Audio-ingangen: 1
Audio-uitgang: 1
Beeldverhouding: 4:3
Levensduur van de lichtbron (besparingsmodus): 3000 uur
Afmetingen (B x D x H): 293 x 192 x 70 mm

Heb je hulp nodig?

Als je hulp nodig hebt met Toshiba TLP-X200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beamer projector Toshiba

Handleiding Beamer projector

Nieuwste handleidingen voor Beamer projector

Sanyo

Sanyo PLC EF10E Handleiding

28 September 2024
Sanyo

Sanyo plc xu74 Handleiding

22 September 2023
Nec

Nec GT 5000 Handleiding

31 Augustus 2023
Optoma

Optoma dx 609 Handleiding

27 Augustus 2023
Nec

Nec MT1045E Handleiding

31 Augustus 2023
Optoma

Optoma ep 761 Handleiding

27 Augustus 2023
Nec

Nec np 4001 Handleiding

31 Augustus 2023
Nec

Nec mt 860 Handleiding

31 Augustus 2023
Nec

Nec LT156 Handleiding

31 Augustus 2023