Toshiba TEC B-SV4D-QM Handleiding
Toshiba TEC
Labelmaker
B-SV4D-QM
Lees hieronder de đ handleiding in het Nederlandse voor Toshiba TEC B-SV4D-QM (32 pagina's) in de categorie Labelmaker. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/32
TEC Label Printer
B-SV4D-QM
Ownerâs Manual
CE Compliance (for EU only)
This product complies with the requirements of EMC and Low Voltage Directives including their
amendments.
VORSICHT:
â˘
Schallemission: unter 70dB (A) nach DIN 45635 (oder ISO 7779)
â˘
Die fßr das Gerät Vorgesehene Steckdose muà in der Nähe des Gerätes und leicht zugänglich sein.
Copyright Š 2003
by TOSHIBA TEC CORPORATION
All Rights Reserved
570 Ohito, Ohito-cho, Tagata-gun, Shizuoka-ken, JAPAN
Centronics is a registered trademark of Centronics Data Computer Corp.
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark of Microsoft Corporation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help. (for USA only)
Changes or modifications not expressly approved by manufacturer for compliance could void the
userâs authority to operate the equipment.
âThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.â
âCet appareil numĂŠrique de la classe B respecte toutes les exigences du Règlement sur le matĂŠriel
brouilleur du Canada.â (for CANADA only)
The EA10953 AC adapter should be exclusively used for the B-SV4D-QM Series printer.
The B-SV4D-QM Series printer must be powered by the EA10953 AC adapter.
Safety Summary ENGLISH VERSION EO1-33035
( ) i
6DIHW\î6XPPDU\î
Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions
necessary for safe handling are included in this manual. All warnings and cautions contained in this manual
should be read and understood before handling or maintaining the equipment.
Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified
using the procedures described in this manual, turn off the power, unplug the machine, then contact your
authorised TOSHIBA TEC representative for assistance.
0HDQLQJVîRIî(DFKî6\PEROî
This symbol indicates warning items (including cautions).
Specific warning contents are drawn inside the symbol.
(The symbol on the left indicates a general caution.)
This symbol indicates prohibited actions (prohibited items).
Specific prohibited contents are drawn inside or near the symbol.
(The symbol on the left indicates âno disassemblingâ.)
This symbol indicates actions which must be performed.
Specific instructions are drawn inside or near the â symbol.
(The symbol on the left indicates âdisconnect the power cord plug from the outletâ.)
This indicates that there is the risk of death or serious injury if the
machines are improperly handled contrary to this indication.
Do not use voltages other than
the voltage (AC) specified on the
rating plate, as this may cause
fire or electric shock.
Do not plug in or unplug the power
cord plug with wet hands as this
may cause electric shock.
If the machines share the same
outlet with any other electrical
appliances that consume large
amounts of power, the voltage
will fluctuate widely each time
these appliances operate. Be sure
to provide an exclusive outlet for
the machine as this may cause
fire or electric shock.
Do not place metal objects or
water-filled containers such as
flower vases, flower pots or mugs,
etc. on top of the machines. If
metal objects or spilled liquid enter
the machines, this may cause fire
or electric shock.
Do not insert or drop metal,
flammable or other foreign
objects into the machines through
the ventilation slits, as this may
cause fire or electric shock.
Do not scratch, damage or modify
the power cords. Also, do not
place heavy objects on, pull on, or
excessively bend the cords, as this
may cause fire or electrical shock.
If the machines are dropped or
their cabinets damaged, first turn
off the power switches and
disconnect the power cord plugs
from the outlet, and then contact
your authorised TOSHIBA TEC
representative for assistance.
Continued use of the machine in
that condition may cause fire or
electric shock.
Continued use of the machines in
an abnormal condition such as
when the machines are producing
smoke or strange smells may cause
fire or electric shock. In these
cases, immediately turn off the
power switches and disconnect the
power cord plugs from the outlet.
Then, contact your authorised
TOSHIBA TEC representative for
assistance.
:$51,1*î
Product specificaties
| Merk: | Toshiba TEC |
| Categorie: | Labelmaker |
| Model: | B-SV4D-QM |
Heb je hulp nodig?
Als je hulp nodig hebt met Toshiba TEC B-SV4D-QM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Labelmaker Toshiba TEC
2 April 2023
Handleiding Labelmaker
Nieuwste handleidingen voor Labelmaker
24 Augustus 2023
12 Juni 2023
12 Juni 2023
9 Mei 2023
9 Mei 2023
9 Mei 2023
9 Mei 2023
9 Mei 2023
9 Mei 2023
9 Mei 2023