Tommee Tippee All-In-One Advanced Bottle and Pouch Warmer Handleiding

Tommee Tippee Flesverwarmer All-In-One Advanced Bottle and Pouch Warmer

Lees hieronder de 📖 handleiding in het Nederlandse voor Tommee Tippee All-In-One Advanced Bottle and Pouch Warmer (4 pagina's) in de categorie Flesverwarmer. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Mayborn (UK) Limited,

Balliol Business Park,

Newcastle upon Tyne,

NE12 8EW, UK

Made in China.

Model number: 1151. Voltage: 220-240V~ 50-60Hz 550-650 W.

Any questions?

Visit our website

tommeetippee.com

INSTRUCTIONS FOR USE

Please read and keep these instructions

electric steam steriliser

heat after use. Allow to cool before cleaning. When in use the

steriliser contains hot water and steam. Keep hands and arms

away from steam vents as it can cause burns and scalds. Use

in a well ventilated area. Do not operate any appliance with

a damaged cord or plug or after the appliance malfunctions

or has been damaged in any manner. If the supply cord is

damaged it must be changed by a qualied person in order to

avoid a hazard. Always use on a at, dry heat resistant

kitchen work top surface. Do not move appliance when in

use. Do not let the cord hang over the edge of the kitchen

work surface or touch hot surfaces. The product has been

tted with a cord wind on the base of the unit to allow you

to adjust the length of the cord safely. It is recommended

that the cord be kept as short as possible. Do not use any

accessories other than those supplied with this appliance.

The cord must exit the cable tidy using the exit recess. If the

cord is correctly placed in the tidy the product will sit level. Do

not start using the product if it is not sitting level. Regularly

check the cord and plug for signs of damage, if visible remove

from use immediately. This appliance is intended to be used

in household and similar applications such as: staff kitchen

areas in shops, ofces and other working environments; farm

houses; by clients in hotels, motels and other residential type

environments; bed and breakfast type environments.

0423221/423222

IMPORTANT WARNINGS!

These instructions can also be found at

www.tommeetippee.com

Keep this instruction sheet for future reference as it

includes important information.

This appliance is intended for household use only. Do not

use outdoors. Before plugging in the steriliser for the rst

time ensure that the voltage is compatible with your electricity

supply by checking the label on the base of the unit. Ensure

water has been added to the unit before switching the unit on.

Do not immerse in water. To protect against re, electric shock

and injury to persons do not immerse cord, plugs or other

parts of the unit in water or other liquid. Misuse of the product

may result in the risk of re, electric shock and/or personal

injury. Do not put base with plug into the dishwasher. This

appliance shall not be used by children. Keep the appliance

and its cord out of reach of children. This appliance is not

intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or

instruction concerning the use of the appliance by a person

responsible for their safety. Children do not understand the

dangers associated with operating electrical appliances.

Never allow children to use this appliance. User maintenance

other than cleaning and descaling is not required for this

product. Cleaning and user maintenance shall not be made by

children.

The surfaces will get hot during use.

Do not touch hot surfaces, use handles and be careful not to

touch the side walls of the lid. Do not place anything on top of

the steriliser. The heating plate surface is subject to residual

SET UP

CLEAN YOUR STERILISER BEFORE FIRST USE - Refer to parts guide and diagram

1. Do not connect to power at this stage.

2. Remove all items from inside the steriliser base.

3. Pour exactly 80ml of water into the steriliser base.

4. Assemble the lower tray (A) with logo front facing and upper tray (B) and place in the steriliser base.

5. Add the lid.

6. Connect the lead and plug into the mains supply. Switch on at mains supply.

7. Press the play switch and it will light up amber to show the sterilising has begun.

8. The light will switch off when sterilising has nished.

9. Allow to cool for 5 minutes before turning off at the mains, removing the plug and steriliser lid.

10. Remove upper tray and lower tray, pour away any remaining water and wipe dry. Your steriliser is now ready to use.

This steriliser is designed for use with Tommee Tippee bottles and feeding accessories (except bottle brush).

The steriliser will hold a maximum of 6 Tommee Tippee bottles or a combination of fewer bottles plus

soothers and breast pump parts.

PARTS GUIDE

CLEANING

Unplug and allow to cool before cleaning. After each use pour away remaining water from the steriliser base by tipping

the steriliser sideways over a sink and wipe clean with a damp cloth only. Do not clean with abrasive cleaners or allow

to come into contact with solvents or harsh chemicals, damage could result.

DE-SCALING

The frequency of de-scaling should be as follows:

Hard water: 14 days

Medium: 21

Soft: 28

You can nd out your water quality via your water provider. FAQs and a picture of limescale can be found on our

website. After each use pour away remaining water from the unit base by tipping the unit sideways over a sink and

wipe with a damp cloth only. Unplug the unit and allow to cool before cleaning. A build up of limescale can negatively

affect the performance of the unit. We recommend carrying out the descaling process as per above frequency

guidelines to ensure the unit continues to work efciently. Living in a hard water area can produce limescale quicker

than other areas therefore descaling is required sooner. Use a descaler that is suitable for use with stainless steel and

use as per the manufacturer’s guidelines. Alternatively you can use white vinegar or a descaling sachet to descale

your unit, please use as per manufacturer’s guidelines. Where no method is stated, 1 sachet to 200ml of hot water ratio

can be applied. See our website for detailed descaling method. Once you have descaled then follow instructions under

set up to perform a nal cleaning cycle. DO NOT use metal objects or scourers to clean your unit. DO NOT use bleach

or sterilising uid to clean the unit. DO NOT use abrasive or anti-bacterial materials. DO NOT scrub the heat plate.

TROUBLESHOOTING

Steriliser will not work

Check the mains lead is plugged into the unit and the mains socket is switched on. Check the fuse is in the plug (in

a UK plug only). Check the socket by plugging in another appliance. Check the appliance by plugging into another

socket.

Excessive steam

Check that items are correctly loaded in steriliser. Use exactly 80ml.

Bottles come out with a chalky mark

Steriliser needs descaling. Refer to Cleaning Instructions.

Cycle takes too long to complete

Too much water in steriliser. Use exactly 80ml.

a. Removable lower tray

b. Removable upper tray

c. Drying rack (parts a+b) with sterile surface

d. Locator for tommee tippee bottle neck

e. Locator for tommee tippee anti-colic valve (for

use if sterilising advanced anti-colic bottle)

f. Locator for bottle hood

g. Lid

h. Steriliser base

i. Lead with plug

j. Power button (play)

k. Stop button

l. Sterilising indicator light

m. Steam vents

n. 80ml measurement on Tommee Tippee bottle

o. Cable tidy

ocn

INFORMATION ON THE DISPOSAL FOR WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)

This symbol on the products and accompanying documents means that used electrical and electronic products

should not be mixed with general household waste. For proper disposal for treatment, recovery and recycling, please

take these products to designated collection points where they will be accepted on a free of charge basis. In some

countries you may be able to return your products to your local retailer upon the purchase of a new product.

Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human

health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local

authority for further details of your nearest collection point for WEEE.

Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation.

The product is tted with a BS 1363 mains plug containing a fuse. If it ever becomes necessary to replace the fuse,

only use fuses that are marked BS 1362, and rated at 5A. In the unlikely event that this plug is not suitable for the

sockets in your home, it should be removed and a suitable plug tted as follows:

The wires of the mains lead are coloured in accordance with the following code:

GREEN AND YELLOW – EARTH

BLUE – NEUTRAL

BROWN – LIVE

As these colours may not correspond with the coloured markings sometimes used to identify the

terminals in the plug, connect as follows.

The wire coloured GREEN AND YELLOW must be connected to the terminal marked E or by the

earth symbol or coloured GREEN or GREEN AND YELLOW. The wire coloured BLUE must be

connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be

connected to the terminal marked L or coloured RED.

If you are in any doubt about how to wire a plug or replace a fuse safely, consult a qualied

electrician.

USAGE

Before sterilisation, wash all bottles and feeding accessories in warm soapy water or in a dishwasher (top rack only) to

remove any milk residues. Separate all components for washing and reassemble teat and screw ring for sterilising.

WARNINGS

MORE THAN 80ML OF WATER IN THE STERILISER BASE WILL PROLONG THE CYCLE TIME. LESS THAN

80ML MAY NOT STERILISE ITEMS PROPERLY. DURING STERILISATION HOT STEAM PASSES THROUGH THE

VENTS AT THE TOP OF THE UNIT. POSITION THIS UNIT AWAY FROM WALLS AND MAKE SURE IT IS NOT

UNDERNEATH ANY OVERHANGING SHELVES OR CABINETS. DO NOT OPEN THE STERILISER UNTIL THE

LIGHT HAS SWITCHED OFF, OR YOU HAVE PRESSED THE STOP BUTTON AND WAITED 5 MINUTES TO ALLOW

FOR COOLING.

1. Place on a at, heat resistant

work surface. Pour exactly 80ml

of water into the steriliser base.

Your Tommee Tippee bottles

have a handy 80ml measure.

4. Place the upper tray onto

the lower tray.

7. Place the lid onto the steriliser

base and plug the lead into the

mains power.

10. The stop button is there in case

you need to manually stop your

steriliser mid cycle. If you do this you

will have to restart the sterilising

process from the beginning as the

contents will not be sterilised.

13. Wash your hands thoroughly

before handling sterilised items.

Take care as the items may be

hot. Remove the sterilised

items. The teat tongs can be

used to remove the small items.

2. Assemble lower tray into the

steriliser base with logo facing

for wards on the right hand side.

5. Place the assembled teat and

screw ring onto the upper tray. It

is important not to have the

hoods tted onto the teat and

screw ring.

8. Press the play button to start

the machine. An amber light will

come on. This shows that the

steriliser is in its warm up phase

and will automatically begin the

sterilising phase when the

appropriate temperature is

reached.

11. After the cycle has nished

allow to cool for at least 5

minutes before opening the

steriliser. We recommend that

you hold the lid by the two side

handles, lift vertically until you

have cleared the upper tray then

tilt the lid to an angle away from

you to allow the water to drain.

14. The trays can be used separately

as a drying rack or sterile surface.

9. The light will automatically switch

off when the sterilising phase

has nished.

12. The contents will remain sterile

for 24 hours if the steriliser

is unopened.

15. To help in the reduction of

limescale, ensure that the unit is

drained and wiped after use once

fully cooled.

3. Place the bottles neck downwards

into the locators of the removable

tray. This includes locators for

advanced anti-colic valves.

6. Slot the hoods into the hood

locators of the removable upper

tray so that they hang over the

teat and screw ring but are not

fully assembled.

4 5 6

987

10 11 12

151413

2 3

!

 





.

 

























































 



















 













Mayborn (UK) Limited,

Balliol Business Park,

Newcastle upon Tyne,

NE12 8EW, UK

Made in China.

Model number: 1151. Voltage: 220-240V~ 50-60Hz 550-650 W.

Any questions?

Visit our website

tommeetippee.com

0423221/423222







Product specificaties

Merk:	Tommee Tippee
Categorie:	Flesverwarmer
Model:	All-In-One Advanced Bottle and Pouch Warmer

Heb je hulp nodig?

Als je hulp nodig hebt met Tommee Tippee All-In-One Advanced Bottle and Pouch Warmer stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag