Toa F-1000BTWP Handleiding

Toa Speaker F-1000BTWP

Lees hieronder de 📖 handleiding in het Nederlandse voor Toa F-1000BTWP (18 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

OPERATING INSTRUCTIONS

SPEAKER SYSTEMS

F-1000B

F-1000BT

F-1000BTWP

F-1000W

F-1000WT

F-1000WTWP

Thank you for purchasing TOA's Speaker System.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

533-06-145-1D

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS ................................................................................. 3

2. GENERAL DESCRIPTION .............................................................................. 4

3. FEATURES ........................................................................................................... 4

4. DIMENSIONAL DIAGRAM .............................................................................. 4

5. IMPEDANCE CHANGE

(F-1000BT, F-1000BTWP, F-1000WT, and F-1000WTWP only)............................... 5

6. ABOUT THE INPUT OVERLOAD PROTECTION CIRCUITRY

(F-1000B, F-1000W, F-1000BT, and F-1000WT only) .............................................. 5

7. NOTES ON OUTDOOR INSTALLATION

(F-1000BTWP and F-1000WTWP only) .................................................................... 6

8. INSTALLATION

8.1. Using the Supplied Brackets

8.1.1. When using only the supplied brackets ................................................... 7

8.1.2. When using both the supplied and optional mounting brackets ............... 7

8.2. Speaker Cable Connections .............................................................................. 7

8.3. Wall Mounting .................................................................................................... 8

8.4. Ceiling Mounting .............................................................................................. 10

8.5. Speaker Stand Mounting .................................................................................. 12

8.6. Pole Mounting (F-1000BTWP and F-1000WTWP only) ................................... 13

8.7. Partition Board Mounting

(F-1000B, F-1000BT, F-1000W, and F-1000WT only) ..................................... 14

9. REPAINTING THE SPEAKER ...................................................................... 15

10. SPECIFICATIONS

10.1. F-1000B and F-1000W ................................................................................... 16

10.2. F-1000BT and F-1000WT .............................................................................. 17

10.3. F-1000BTWP and F-1000WTWP ................................................................... 18

When Installing the Unit

• Install the unit only in a location that can

structurally support the weight of the unit and the

mounting bracket. Doing otherwise may result in

the unit falling down and causing personal injury

and/or property damage.

• Do not use other methods than specified to mount

the bracket. Extreme force is applied to the unit

and the unit could fall off, possibly resulting in

personal injuries.

• Use nuts and bolts that are appropriate for the

ceiling's or wall's structure and composition. Failure

to do so may cause the speaker to fall, resulting in

material damage and possible personal injury.

• Tighten each nut and bolt securely. Ensure that the

bracket has no loose joints after installation to

prevent accidents that could result in personal

injury.

• Do not mount the unit in locations exposed to

constant vibration. The mounting bracket can be

damaged by excessive vibration, potentially

causing the unit to fall, which could result in

personal injury.

• (F-1000B, F-1000BT, F-1000W, and F-1000WT

only)

Since the unit is designed for in-door use, do not

install it outdoors. If installed outdoors, the aging of

parts causes the unit to fall off, resulting in personal

injury. Also, when it gets wet with rain, there is a

danger of electric shock.

• (F-1000BTWP and F-1000WTWP only)

When installing the unit in the snowy area, take

appropriate measures to prevent snow from lying

on the unit. If the snow lies on the unit, the unit may

fall, causing personal injuries.

• Do not use anti-rust lubricant. If it contacts resin or

rubber parts, they could deteriorate and cause the

unit to fall, possibly resulting in personal injury.

• Do not install the unit where it is likely to be

corroded in such places as bath rooms, indoor

pools, or seaside. In such locations the bracket

may be vulnerable to corrosion, eventually allowing

the speaker to fall resulting in personal injury.

When Installing the Unit

• (F-1000BT and F-1000WT only)

Never set the impedance switch to the "8 Ω"

position when connecting the unit to the amplifier's

high-impedance speaker line (70 V or 100 V line),

as doing so may damage the unit or amplifier.

Be sure to set the switch to the "8 Ω" position when

connecting to the amplifier's low-impedance line.

• (F-1000BT, F-1000BTWP, F-1000WT, and F-

1000WTWP only)

Never set the impedance switch to the "330 Ω"

position when operating the unit on 100 V line.

Failure to follow this instruction could result in

damage to the unit or amplifier.

• Avoid touching the unit's sharp metal edge to

prevent injury.

• To avoid electric shocks, be sure to switch off the

amplifier's power when connecting speakers.

When the Unit is in Use

• Do not place heavy objects on the unit as this may

cause it to fall or break which may result in

personal injury and/or property damage. In

addition, the object itself may fall off and cause

injury and/or damage.

• Do not operate the unit for an extended period of

time with the sound distorting. This is an indication

of a malfunction, which in turn can cause heat to

generate and result in a fire.

• Do not stand or sit on, nor hang down from the unit

as this may cause it to fall down or drop, resulting

in personal injury and/or property damage.

• Have the unit checked periodically by the shop

from where it was purchased. Failure to do so may

result in corrosion or damage to the unit or its

mounting bracket that could cause the unit to fall,

possibly causing personal injury.

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe

operation.

• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or

cautions regarding safety.

• After reading, keep this manual handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used in this manual to prevent bodily injury and property

damage which could result from mishandling. Before operating your product, read this manual first and

understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.

Indicates a potentially hazardous situation which,

if mishandled, could result in death or serious

personal injury.

WARNING

Indicates a potentially hazardous situation which,

if mishandled, could result in moderate or minor

personal injury, and/or property damage.

CAUTION

Product specificaties

Merk:	Toa
Categorie:	Speaker
Model:	F-1000BTWP
Kleur van het product:	Zwart
Gewicht:	2000 g
Breedte:	130 mm
Diepte:	131 mm
Hoogte:	202 mm
Soort:	Inbouwluidsprekers
Connectiviteitstechnologie:	Bedraad
Type stroombron:	Niet ondersteund
Gemiddeld vermogen:	15 W
Equalizer-instellingen:	Nee
Aanbevolen gebruik:	Universeel
Audio-uitgangskanalen:	2.0 kanalen
Speaker plaatsing:	Ceiling-mountable, Floor, Wall-mountable
Aantal drivers:	1
Woofer:	Nee
Diameter driver subwoofer (imperiaal):	4 "
Diameter driver:	100 mm
Frequentiebereik:	85 - 20000 Hz
Gevoeligheid:	87 dB
Versterkeraansluiting (binding post):	Ja
Speaker omsluiting:	Reflex
Versterker:	Nee
Tweeter:	Ja
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Crossover frequentie:	5000 Hz
Speaker positie:	Satelliet