Timex BST.47 TW5M26500ZA Handleiding

Timex Horloge BST.47 TW5M26500ZA

Lees hieronder de 📖 handleiding in het Nederlandse voor Timex BST.47 TW5M26500ZA (24 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
USER GUIDE …..……..……..……..… 1
GUÍA DEL USUARIO ..……..……..… 3
MODE D’EMPLOI ……..……..……..… 5
GUIA DO USUÁRIO…..……..……..… 8
GUIDA DELL’UTENTE ..……..……..… 10
BENUTZERHANDBUCH …..……..… 13
GEBRUIKERSHANDLEIDING ……..… 15
用户指南 ..……..……..……..……..… 17
…..……..……..……..… 19
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ ..… 21
01Q-095000 1.15.19
Register your product at https://www.timex.com/product-registration.html
Registra tu producto en www.timex.es/es_ES/product-registration.html
timex.com.mx/pages/registro-de-productos
Enregistrez votre produit sur fr.timex.ca/product-registration.html
www.timex.fr/fr_FR/product-registration.html
Registre o seu produto no site www.timex.eu/en_GB/product-registration.html
Registrare il prodotto all’indirizzo www.timex.it/it_IT/product-registration.html
Registrieren Sie Ihr Produkt bei www.timex.de/de_DE/product-registration.html
Registreer uw product bij www.timex.eu/en_GB/product-registration.html
请在 上注册您的产品www.timex.eu/en_GB/product-registration.html
製品登録サイト https://www.timexwatch.jp/
Зарегистрируйте свое изделие на сайте www.timex.eu/en_GB/product-registration.html
00247_W105
50-LAP
1
ENGLISH 01Q-095000
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from
date of purchase for $5… You can pay with AMEX, Discover, Visa or MasterCard
by calling 1 800-448-4639 during normal business hoursPayment must be
made within 30 days of purchase… Name, address, telephone number, purchase
date, and 5-digit model number required… You can also mail a check for $5 to:
Timex Extended Warranty, P…O… Box 1676, DeptEF, Little Rock, AR 72203…
Please read instructions carefully to understand how to operate your Timex
®
watch… Your model may not have all of the features described in this
booklet.
FEATURES
Time/date (12/24 hour format MMDD/DDMM format two Time Zones
hourly Chime)
Countdown timers (up to 24 hours stop or repeat at end two intervals)
Three alarms (Daily/weekday/weekend/weekly 5-minute backup)
Chronograph (lap storage workout recall by date average/best time
display • on-the-y lap recall • elapsed time counter)
INDIGLO® night-light with NIGHT-MODE® feature…
BASIC OPERATIONS
A. SET/RECALL or DONE (To save changes and exit setting mode)
B. INDIGLO® Button
C. MODE or NEXT (Proceed to next step)
D. STOP/RESET or (Decrease value… Hold to decrease rapidly…)
E. START/SPLIT or + (Increase value… Hold to increase rapidly…)
When setting, each button has a dierent function as indicated above. Display
indicates when button changes function
NOTE: When setting, each button has a special function as shown on the
watch display…
E
A
C
B
D
E
A
C
B
D
NOTE: START/SPLITThe button on your watch may be found on the face or
on the side…
TIME/DATE/HOURLY CHIME
1… In TIME mode, press and hold SET/RECALL. Time Zone ashes.
2… Press + – or to select Time Zone 1 or 2…
3… Press NEXT to set hour. Digits ash.
4… Press + or to change hour… Scroll through 12 hours to change to AM/PM
5… Press NEXT + – and / to set minutes…
6… Press NEXT + – and / to set seconds to zero
7… Continue pattern to set day of week, month, date, 12-hour (AM/PM) or
24-hour military time format, MM…DD or DD…MM date format, turn hourly
Chime on/o, turn Beep on/o. If you select Beep on, beep will sound every
time you push a button except INDIGLO
® button…
8… Press NEXT to set second Time Zone, following procedure above…
9… Press DONE to exit…
TIPS:
Press and hold START/SPLIT briey to peek at second Time Zone.
Press and hold for 4 seconds to change Time Zone START/SPLIT
displayed…
In other modes, press and hold to view Time, release to return to MODE
current mode…
CHRONO
Watch counts up to 99 laps (100 hours max…) and stores laps
RUN CHRONO:
1… Press MODE until CHRONO appears…
2… Press START/SPLIT to start Chrono… Chrono continues to run if you exit
the mode…
3… Press START/SPLIT to take a split… Lap number alternates with last two
digits of display…
4… Display will freeze for 10 seconds… Press to release display and see MODE
running Chrono…
5… Press STOP/RESET to stop or pause Chrono… Press to START/SPLIT
resume…
6… When workout is completed, you have two options: Press and hold SET/
RECALL STOP/RESET to store workout or press and hold to clear
workout (both reset chrono to 00:00:00)…
TIPS:
When Chrono is running, appears in Time display…w
When storing a workout, display will indicate available free memory
(number of laps remaining to be stored… Each workout stored equals
number of laps taken plus one extra lap to store total workout time) or
MEMORY FULL…
If there is insucient memory to store entire workout, total time, date and
oldest laps will be stored up to remaining capacity…
RECALL WORKOUTS:
1… Press SET/RECALL to enter recall mode. Date of last workout ashes.
2… Press + / to choose workout to review… Workouts are stored by date…
Multiple workouts may be stored on same date
3… Press NEXT to enter workout details…
4… Press + / to review Lap/Split times of successive laps, BEST lap, AVG lap…
5… To review other workouts, press NEXT until date ashes then follow steps
2-4…
6… Press DONE to exit…
TIP:
To view lap/split times of current workout, while Chrono is running, press
SET/RECALL + – and / to scroll through lap/split times, BEST lap, AVG
lap… Current lap will not be shown… No other workouts can be viewed while
Chrono is running
CLEAR WORKOUTS:
1… With Chrono stopped, press and hold HOLD TO CLEAR STOP/RESET
LAST WRKOUT appears…
2… Watch will beep… Last stored workout is erased from memory…
3… To clear all workouts, continue to hold HOLD TO CLEAR STOP/RESET
CHRONO MEM appears… Watch beeps a second time to indicate all stored
workouts are erased… MEMORY 50 will be displayed…
CUSTOMIZE DISPLAY FORMAT:
This determines what is shown in rst and second lines of the display.
1… Press and hold SET/RECALL
2… If no workouts have been stored, display will read FORMAT/SET…
3… If workouts have been stored, last workout will be displayed
4… Press NEXT until format display appears…
5… Press + – / to select LAP/SPL (Split in large digits), SPL/LAP (Lap in large
digits), or TOTAL RUN…
6… Press SET/RECALL to exit
NOTE: TOTAL RUN format allows you to view total elapsed time and total
activity time (total activity time=total elapsed time - time paused during
workout)…
Select TOTAL RUN display format as above…
1… Press START/SPLIT to start Chrono…
2
ENGLISH 01Q-095000
2… Press STOP/RESET every time you pause/stop during your workout…
Primary display will show time elapsed less paused time (total activity time)…
Lower display will continue to run, showing total elapsed time since Chrono
was started…
3… Press STOP/RESET to stop timing… You may clear or store workout…
TIPS:
When you have completed a workout in this format, total elapsed time will
continue to run until workout is stored or cleared…
When recalling TOTAL RUN, only total activity time will be displayed…
Elapsed time counter will continue to run until Chrono is reset… If you
take a split, display will change to SPL/LAP Elapsed time is not stored in
memory…
TIMER
1… Press MODE until TIMER appears…
2… Press SET/RECALL. Hour digits ash.
3… Press + – / to change hour…
4… Press NEXT + – and / to set minutes…
5… Press NEXT + – and / to set seconds…
6… Press NEXT and / to select STOP AT END or REPEAT AT END… + –
7… Press DONE to conrm and exit.
8… Press START/SPLIT to start TimerTimer will continue to run if you exit
Timer mode…
9… An alarm melody chimes when Timer reaches zero or before it starts to
countdown again…
10… Press STOP/RESET to stop TimerPress again to reset
TIPS:
H appears in Time display when Timer is running
For repeat Timer operation, repetition number appears at top right of
screen in both countdown and interval Timers…
Maximum number of repeats is 99…
INTERVAL
You can set two Timers that countdown in sequence…
1… Press MODE until INTTMR appears…
2… Press SET/RECALL. INT 1 ashes.
3… Press then follow steps 3-6 in Timer section…NEXT
4… When return to INT 1 Press / to change to INT 2 (Interval 2)…+ –
5… Press NEXT then follow steps 3-6 in Timer section…
6… Press DONE to conrm and exit.
7… Press START/SPLIT to start TimerOther operations are the same as for
TIMER…
TIPS:
When rst countdown is complete, Timer proceeds to the next non-
zero interval that is set… INDIGLO® night-light ashes and beep sounds
between each interval…
If you set both Timers in Interval Timer to repeat, Timer will countdown
both intervals and then repeat entire sequence…
ALARM
1… Press MODE until ALM 1 appears…
2… Press SET/RECALL to set alarm
3. Hour digits ash. Press + – / to change hour
4… Press NEXT and / to set minutes, AM or PM (if primary time display is + –
in 12-hour format), DAILY, WKDAYS, WKENDS, or day of the week (weekly
alarm)…
5… Press DONE to conrm and exit.
6… Press START/SPLIT STOP/RESET or to turn Alarm ON or OFF…
7… To set remaining alarms, press for ALM 2 or ALM 3 and set as MODE
above…
TIPS:
When Alarm is on, appears in Time display…a
When Alarm goes o, INDIGLO® night-light and alarm icon ash and alert
sounds… Press any button to silence…
If no button is pushed, alert will cease after 20 seconds and Backup Alarm
will activate after 5 minutes…
NOTE: The alarm icon will show on the display only when the alarm set a
time is less than 12 hours away…
INDIGLO® NIGHT-LIGHT/NIGHT-MODE® FEATURE
1… Press INDIGLO
® button to activate night-lightElectroluminescent
technology illuminates entire watch face at night and in low light conditions…
2… Continue to press up to 3 seconds to maintain illumination…
3… Press and hold INDIGLO
® button for 4 seconds to activate
NIGHT-MODE® feature… kwill appear
4… In NIGHT-MODE® feature, push any button to illuminate watch face for
3 seconds…
5… To deactivate NIGHT-MODE® feature, press INDIGLO
® button for
4 seconds… Feature will automatically deactivate after 8 hours…
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or ( ) is indicatedO
Water-Resistance Depth p.s.i.a. * Water Pressure Below Surface
30m/98ft 60
50m/164ft 86
100m/328ft 160
*pounds per square inch absolute
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.
1… Watch is water-resistant only as long as lens, push buttons and case remain
intact…
2… Watch is not a diver watch and should not be used for diving…
3… Rinse watch with fresh water after exposure to salt water…
4… Shock-resistance will be indicated on watch face or caseback… Watches are
designed to pass ISO test for shock-resistance… However, care should be
taken to avoid damaging crystal/lens…
BATTERY
Timex strongly recommends that a retailer or jeweler replace battery… If
applicable, push reset button when replacing battery… Battery type is indicated
on caseback… Battery life estimates are based on certain assumptions regarding
usage; battery life may vary depending on actual usage…
DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP
LOOSE BATTERIES AWAY FROM CHILDREN.
TIMEX INTERNATIONAL WARRANTY
http://www…timex…com/productWarranty…html
©2018 Timex Group USA, Inc… TIMEX, INDIGLO and NIGHT-MODE are
registered trademarks of Timex Group B…V… and its subsidiaries…
IRONMAN® and the “M-DOT” logo are registered trademarks of World Triathlon
Corporation…
Ocial Product of the IRONMAN TRIATHLON.
Used here by permission…


Product specificaties

Merk: Timex
Categorie: Horloge
Model: BST.47 TW5M26500ZA

Heb je hulp nodig?

Als je hulp nodig hebt met Timex BST.47 TW5M26500ZA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Timex

Handleiding Horloge

Nieuwste handleidingen voor Horloge