Thomson 40FT5453 Handleiding

Thomson LED televisies 40FT5453

Lees hieronder de 📖 handleiding in het Nederlandse voor Thomson 40FT5453 (11 pagina's) in de categorie LED televisies. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

EN 1

Getting started

Chapter 1

Important information

Safety

Ensure that your domestic mains supply voltage

matches the voltage indicated on the identication

sticker located at the back of your set. Where the

mains plug or an appliance coupler is used as

disconnect device, the disconnect device shall remain

readily operable.

On certain models, the light indicator is located at the

side of the TV set. The absence of a light indication

at the front does not mean that the TV set is fully

disconnected from the mains. To disconnect the TV

set completely, the mains plug must be pulled out.

The TV set’s components are sensitive to heat. The

maximum ambient temperature should not exceed

35º Celsius. Do not cover the vents at the back or

sides of the TV set. Leave sufcient space around

it to allow adequate ventilation. Install the appliance

away from any source of heat (replace, ...) or

appliances creating strong magnetic or electric elds.

Moisture in rooms where the set is installed should

not exceed humidity. 85% Apparatus shall not be

exposed to dripping or splashing and no objects

lled with liquids, such as vases, shall be placed

on the apparatus. Moving the set from a cold place to

a warm one can cause condensation on the screen

(and on some components inside the TV set). Let the

condensation evaporate before switching the TV set

on again.

The or /POWER button on the TV set or the

button on the remote control can be used to switch it

on and put it into standby mode. If you are not going

to be watching the TV for a lengthy period of time,

switch it off completely by removing the plug from the

mains power socket.

During , we recommend that you thunderstorms

disconnect the TV set from the mains and aerial so

that it is not affected by electrical or electromagnetic

surges that could damage it. For this reason, keep

the mains and aerial sockets accessible so they can

be , if necessary.disconnected

Unplug the TV set immediately if you notice it giving

off a or . You must never, smell of burning smoke

under any circumstances, open the TV set yourself,

as you run the risk of an in doing so.electric shock

TV screen

The TV screen used in this product is made of glass.

Therefore, it can break when the product is dropped

or impacted upon by other objects.

The TV screen is a very high technology product,

giving you nely detailed pictures. Occasionally, a few

nonactive pixels may appear on the screen as a xed

point of blue, green or red. This does not affect the

performance of your product.

Care

Use a glass-cleaning product to clean the screen and

a soft cloth and mild detergent to clean the rest of the

set.

Important: Using strong detergents, alcohol-based

and abrasive products may damage the screen.

Dust the vents at the back and sides regularly. Using

solvents, abrasive or alcohol-based products could

damage the TV set. If an object or liquid enters inside

the appliance, unplug it immediately and have it

checked by an authorized engineer. Never open the

appliance yourself since this may put you at risk or

damage the appliance.

Hanging the TV set on the wall

Warning: This operation requires two people.

To ensure a safe installation, observe the following

safety notes:

Check that the wall can support the weight of the TV •

set and wall mount assembly.

Follow the mounting instructions provided with the •

wall mount. For certain models, make sure to screw

the hexagonal VESA wall mounting screw bosses

(and screws) provided with the set into the nuts for

the wall mount at the back of your set before your

wall mounting.

The TV set must be installed on a vertical wall.•

Make sure to use only screws suitable for the •

material of the wall.

Make sure that the TV set cables are placed so that •

there is not danger of tripping over them.

All other safety instructions about our TV sets are

also applicable here.

Handling the TV set on the table

Before setting up your television set, make sure that

the surface you want to put the set on can support its

weight.

Don’t place the set on an unstable surface (e.g.

moving shelf, very edge of a unit) and make sure that

the front of the television set does not overhang the

surface it is sitting on.

This product is designed and manufactured

with high quality materials and components

which can be recycled and reused.

This symbol means that electrical and

electronic equipment, at their end-of-life,

should be disposed of separately from

your household waste.

Please, dispose of this equipment at your local community

waste collection/recycling centre. In the European Union

there are separate collection systems for used electrical

and electronic product. Please, help us to conserve the

environment we live in!

WARNING

To prevent the spread of re, keep candles or

other open ames away from this product at

all times.

EN 2

Connect the power and antenna

To switch on TV after connecting power cord, press or

POWER/ .

Note: Position of power socket varies according to TV model.

On certain models, you have to turn on

the power switch rst.

DVD recorder, cable receiver

DVD player, home theatre system Blu-ray Disc player, headphones, HD game

console & HD camcorder

Network

connection

Getting started

Notes:

- The gures are for representation only.

- Not all connections available on all models.

- The location of the power socket on the TV may

vary according to TV model.

- The positions and names of the function buttons

and connectors on the TV may vary according to

TV model.

Cable

Note: Disconnect the

power cord before

connecting devices.

Cable

DVD player/

Home theatre system

Note: Before connecting a

PC, set the PC monitor

refresh rate to 60Hz.

Or use an HDMI

connection.

DVD

recorder

Set-top

box

HD Camcorder

Notes:

- USB connectors are for data

input from USB storage

devices.

- Excessive sound pressure

from earphones and

headphones can cause

hearing loss.

- Number of HDMI may vary.

Blu-ray Disc

player

HD game

console

English

OUT

ANTENNA

OUT

ANTENNA

OUT

EN 3

Source To select connected devices.

Standby / quit standby.

0-9 To select a channel, page or setting.

ECO To select desired power saving mode.

Guide To toggle the Electronic Programme

Guide on or off (only available for digital

channels).

Menu To access the main menu; to return to the

previous menu.

Exit To exit the menu structure or Teletext.

To navigate in the main menu; to select

menu options; to switch to the previous or

next photo, song or video in USB function.

/*Zoom+/-

To navigate in the main menu; to set

functions and change values. ► can

also be used to open the corresponding

submenu.

* To select the picture format.

Note: You are recommended to use the full

screen mode. Do not use the display mode

with black bars on both sides of the picture

(such as 4:3) for long time, otherwise the

TV screen may be damaged permanently.

OK To open the corresponding submenu and

activate a setting in menus; to freeze/

Getting started

Important:

Battery shall not be exposed to excessive heat such as sunshine, re or the like. If the batteries in your remote

control are run down you can use the buttons on your TV set. In TV mode, they have the same functions as the

corresponding buttons on the remote control. In the menus they have the following functions:

For models with button on the set: For models without button on the set: OK OK

PR+ PR PR+ PR or ▲ ▲ or ▲ ►

PR- PR PR- PR OKor ▼ ▼ or ▼ ◄ &

VOL+, + + or VOL VOL+, ► ► or VOL ► ▲

VOL-, - - or VOL VOL-, ◄ ◄ or VOL ◄ ▼

MENU or Menu MENU Menuor

OK OK

Remote control functions

Most of your television's functions are available via the menus that appear on the screen. The remote control

supplied with your set can be used to navigate through the menus and to congure all the general settings.

Switching on/off and standby mode

Switch on/off your TV

When powered on, the TV will be turned on directly.

To switch it off, unplug the mains socket from the

mains outlet.

Switch to standby

Press the or button on the set or the POWER/

button on the remote control. The TV set remains

powered up, but with low energy consumption.

Switch on from standby

Press the or button on the set or the POWER/

button on the remote control to switch the television

on at the last channel in the last mode, i.e. analog or

digital, or AV programme you were watching.

(*On certain models, you have to turn on the power

switch rst.)

unfreeze the picture in digital TV mode.

Option To display the function menu to perform

certain operations; to display the Teletext

page in different mode.

Return To return to the previous channel; to return

to the previous menu in USB function.

V+/- To control the volume.

Info To display programme information, if

available.

Mute To switch the sound off and back on again.

P+/- To change channels.

TEXT To toggle Teletext on or off.

SUBTITLE To select a subtitle language available for

selected digital TV programme.

LIST To display channel list.

TV To access TV mode.

Colour

buttons

To select tasks or Teletext pages. The

red button can also be used for MHEG

function.

Lang To select a sound type available for

selected analog TV programme; to select

an audio language available for selected

digital TV programme.

Product specificaties

Merk:	Thomson
Categorie:	LED televisies
Model:	40FT5453
Kleur van het product:	Zwart
Gewicht verpakking:	20800 g
Breedte verpakking:	1115 mm
Diepte verpakking:	130 mm
Hoogte verpakking:	770 mm
Energie-efficiëntieklasse (oud):	A
Beeldschermdiagonaal:	40 "
Resolutie:	1920 x 1080 Pixels
Oorspronkelijke beeldverhouding:	16:9
Ondersteunde videoformaten:	DIVX,DIVX HD,MKV,MPEG4
Ethernet LAN:	Ja
Audiosysteem:	Wide Stereo
Helderheid:	380 cd/m²
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	4
DVI-poort:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	10 W
Stroomverbruik (in standby):	0.27 W
Vermogensverbruik (max):	90 W
Aantal luidsprekers:	2
Hoofdtelefoonuitgangen:	1
Formaat analoog signaal:	NTSC,PAL BG,PAL DK,PAL I,PAL L,SECAM B/G,SECAM D/K,SECAM L
HDCP:	Ja
HD type:	Full HD
3D:	Nee
Responstijd:	8 ms
Ondersteunde grafische resoluties:	1360 x 768 (WXGA)
VESA-montage:	Ja
Paneelmontage-interface:	400 x 400 mm
Diepte ( zonder voet ):	48 mm
Hoogte (zonder voet ):	625 mm
Breedte ( zonder voet ):	965 mm
Gewicht (zonder voet):	14700 g
On Screen Display (OSD)-talen:	BUL,CZE,DAN,DEU,DUT,ENG,ESP,EST,FIN,FRE,GRE,HUN,ITA,LAV,LIT,NOR,POL,POR,RUM,RUS,SER,SLK,SLV,SWE,TUR,UKR
Schermdiameter in centimeters:	102 cm
PC-ingang (D-Sub):	Ja
Common interface Plus (CI+):	Ja
Soort tuner:	Analoog & digitaal
Formaat digitaal signaal:	DVB-C,DVB-T
Timeshift:	Ja
Breedte apparaat (met standaard):	965 mm
Diepte apparaat (met standaard):	226 mm
Hoogte apparaat (met standaard):	675 mm
Gewicht (met standaard):	16800 g
Ruisonderdrukking:	Ja
Digital Living Network Alliance (DLNA) gecertifieerd:	Ja
Mogelijkheden tot aanpassen schermafmetingen:	4:3,14:9,16:9
Teletext:	Ja
Equalizer-instellingen:	Ja
Aan/uit-timer:	Ja
Elektronische TV-gids:	Ja
On Screen Display (OSD):	Ja
Aantal On Screen Display-talen:	27
Common interface (CI):	Nee
Motion interpolation technologie:	CMR (Clear Motion Rate)
USB-recording:	Ja
Smart modes:	Hotel
LED backlight-type:	Edge-LED
Teletekst:	1000 pagina's
Motion interpolation frequentie:	100 Hz
Geschikt voor wifi:	Nee
Aantal SCART-poorten:	1
Basis-hotelmodus:	Ja
Foto-en-foto:	Ja
Marketingnaam dynamische contrastratio:	Mega Contrast
Ouderlijk toezicht:	Ja
Foto-en-text:	Ja
Aantal kanalen:	9999 kanalen
Extended PVR:	Ja
Afstandsbediening inbegrepen:	Ja
Wifi:	Nee
Stroomverbruik (typisch):	56.7 W
Slaaptimer:	Ja