TFA AirCO2ntrol Life 31.5003 Handleiding
TFA
Multimeter
AirCO2ntrol Life 31.5003
Lees hieronder de 📖 handleiding in het Nederlandse voor TFA AirCO2ntrol Life 31.5003 (2 pagina's) in de categorie Multimeter. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
5020-0105 CO2ntrol Life - Operating Instructions
1. Green LED Display (<800ppm)
2. Yellow LED Display (800-1200ppm)
3. Red LED Display ( >1200ppm & buzzer alarm)
4. Mute Button
5. Power lnlet
6. Housing Stand
7. Screw Position
EMC/RFI
Readings may be affected if the uni! is operated within radio frequency electromagnetic eld strength of approximately 3 volts per meter, but the performance of
the instrument will not be permanently affected. Note: Under the electromagnetic eld of 3V/m, the reading will not meet the specication.
Product Overview
Thank you for selecting 5020-0105 desktop C0 2 monitor, 5020-0105 C02 monitor is smart, compact and easy-to-use. In addition to measuring the C0 2
concentration, 5020-0105 can also measure the ambient temperature and the relative humidity (CO 2+Temp.+RH). This product is developed to detect
the presence of C02 in ambient air and help people to take care of lndoor Air Quality. 5020-0105 can be widely used in the ofce building, school,
exhibition hall, shopping mall, meeting room, tness center, restaurant and other public places where personal comfort, healthy is important.
Features:
· Three different LED display shows the current lndoor Air Quality
· Press MUTE button for alarm on/off.
· Built in the LCD Backlight for easy reading in the dark.
Warnings:
· Please take off the AC power adapter and store it weil when this C0 2 monitor left idle for long.
· This C02 monitor is for harne use, not suitable for certifying the lest results.
· lf use this C02 monitor for testing, 5020-0105 does not guarantee the lest results.
1. 2 min. warm-up time when rst time power.
2. The LCD shows 4 bars with 1sec blank cycle during warm-up
3. The MUTE button is disabled during warm-up
4. The device shows the C02 readin after warm-u
Warm-Up Time: 2 MIN.
Press MUTE button to select buzzer on/off. lf the „MUTE“function is off, while C0 2
concentration exceed the alarm level (>1200 ppm), there will be a buzzer.
Note: The device settin with alarm is buzzer on when power on rst time, user can
set the alarm on/off under MUTE function
Usin the MUTE function:
Safety Instructions:
Warning: Your safety is very important to us .To ensure to use the product correctly and safely, we would like to draw your attention to read the warning
and entire User Manual before using the product. These are important safety information and should be observed at all times.
1. Check if the contents of the package are undamaged and complete.
2. For cleaning the instrument please do not use an abrasive cleaner only a dry or moist piece of soft cloth. Do not allow any liquid into the interior
of the device.
3. Please store the measuring instrument in a dry and clean place.
4. Avoid any force like shocks or pressure to the instrument.
5. No responsibility is taken for irregular or incomplete measuring values and their results, the liability for subsequent damages is excluded!
6. Do not keep the product under the hol and moisture environment. Keep the product away from the heat source or near water.
7. Please use only the included power adaptor. lmproper power adaptor or power sources can cause serious damage to the product, or result in injury
or death to the user.
!
Technical changes, any errors and misprints reserved ● Reproduction is prohibited in whole or part
● Stand07 2104CHB ● © DOSTMANN electronic GmbH
Caring for poduct
To ensure you receive the maximum benet from using this product, please observe the follow guidelines.
1 Cleaning: Disconnect the power before clean- Use a damp cloth, do not use the liquid cleaning agent, such as benzene, thinner or aerosols.
2. Repair: Do not attempt to repair the product or modify the circuitry by yourself. Please contact with the local dealer or a qualied repairman if the
product needs servicing.
3. Air circulation: The vents allow the air circulation liquid for measurement of the CO 2 concentration and the ventilation should not be blocked.
Specicationen:
Method - NDIR · Display - LCD · Independent CO 2, RH and Temperature
readings · Sample Method - Diffusion or ow through (50 200 ml/min)~
CO2 Specication
Measurement Range: 0-3000ppm display
Display Resolution: 1ppm (0~1000ppm ); 5ppm (1001~2000ppm);
10ppm (2001~3000ppm)
Repeatability ± 20ppm @ 400ppm
Response Time: About 2 min for 63% step change
Warm-up Time: 2 min. at 22°C
Zone LED Display: Green: <800ppm; yellow: 800~1200ppm; Red >1200ppm
Temperature Specication:
Temperature Range: 0°C to 50°C display
Display Resolution: 0.1°C
Display Unit: °C
Response Time: 20-30 minutes (case must equalize with environment)
RH Specication:
Measurement Range: 20-90% RH
Display Resolution: 1% RH
Response Time: < 5Minuten for 63% step change
Operating Conditions:
Operating Temperature: 0°C - 50°C
Humidity Range:: 0 ~ 95% RH non-condensing
Storage Temperature: -20°C - 60°C
Power consumption:
Power supply: USB or 5 VDC from external AC/DC-adapter
which is included in package
(Use specied AC adapter only)
Input: AC 100~240V , 50/60HZ , 0.2A
Output: DC 5.0V , 1.0 A , 5.0W
Average active efciency: 74.926%
Noload power consumption: 0.0343W
Dimension:
Fault Codes & Troubleshooting Guede:
Fault Icon: Description of the fault: Suggested Actions:
The ambient temperature has exceeded the This error will clear when the temperature returns to the
operating temperature range (0...50°C) range between 0...50°C.
EEPROM System Problem Please reconnect AC adapter to 5020-0105 CO2 Monitor.
If the „Err5, Err6“ still appears, please contact the Service
Department for further assistance.
Waste disposal
This instrument is labelled in accordance with the EU Waste Electrical
and Electronic Equipment Directive (WEEE). Please do not dispose
of this instrument in household waste. The user is obligated to take
end-of-life devices to a designated collection point for the disposal of
electrical and electronic equipment, in order to ensure
environmentally-compatible disposal.
Explanation of symbols
This sign certies that the product meets the requirements of the EEC
directive and has been tested according to the specied test methods.
DOSTMANN electronic GmbH ● Mess- und Steuertechnik ● Waldenbergweg 3b ● D-97877 Wertheim-Reicholzheim Germany
Phone:+49 (0) 93 42 / 3 08 90 ● E-Mail: info@dostmann-electronic.de www.dostmann-electronic.de ●
Product specificaties
Merk: | TFA |
Categorie: | Multimeter |
Model: | AirCO2ntrol Life 31.5003 |
Heb je hulp nodig?
Als je hulp nodig hebt met TFA AirCO2ntrol Life 31.5003 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Multimeter TFA
23 April 2023
24 Maart 2023
26 Februari 2023
24 Januari 2023
14 Januari 2023
28 Oktober 2022
Handleiding Multimeter
- Multimeter Abus
- Multimeter Aldi
- Multimeter Alecto
- Multimeter Altai
- Multimeter Amiko
- Multimeter Amprobe
- Multimeter Appa
- Multimeter Basetech
- Multimeter Beha-Amprobe
- Multimeter Benning
- Multimeter Brandson
- Multimeter Brennenstuhl
- Multimeter Bruder Mannesmann
- Multimeter Digitus
- Multimeter Elma
- Multimeter Elro
- Multimeter Extech
- Multimeter Ferm
- Multimeter Flir
- Multimeter Fluke
- Multimeter Gembird
- Multimeter Gossen Metrawatt
- Multimeter Greenlee
- Multimeter Hager
- Multimeter Hubinont
- Multimeter Ideal
- Multimeter Keithley
- Multimeter Kingcraft
- Multimeter Laserliner
- Multimeter Mastech
- Multimeter Maxwell
- Multimeter Megger
- Multimeter Metrel
- Multimeter Metrix
- Multimeter Micronta
- Multimeter Milwaukee
- Multimeter Monacor
- Multimeter Parkside
- Multimeter PCE Instruments
- Multimeter Perel
- Multimeter Plieger
- Multimeter Powerfix
- Multimeter Profile
- Multimeter Sanwa
- Multimeter Schneider
- Multimeter Silverline
- Multimeter Skandia
- Multimeter Stanley
- Multimeter Topcraft
- Multimeter Uni-T
- Multimeter Velleman
- Multimeter Voltcraft
- Multimeter Wiha
- Multimeter Workzone
- Multimeter Joy-it
- Multimeter Jung
- Multimeter Clas Ohlson
- Multimeter Steren
- Multimeter Klein Tools
- Multimeter EMOS
- Multimeter Tacklife
- Multimeter Biltema
- Multimeter REV
- Multimeter Etekcity
- Multimeter Testo
- Multimeter Somogyi
- Multimeter Testboy
- Multimeter Yato
- Multimeter Wago
- Multimeter GW Instek
- Multimeter Kyoritsu
- Multimeter Owon
- Multimeter Projecta
- Multimeter Cablexpert
- Multimeter Högert
- Multimeter Multimetrix
- Multimeter Digi-tool
- Multimeter Kewtech
- Multimeter Sonel
- Multimeter Testec
- Multimeter Vimar
- Multimeter Strex
- Multimeter PeakTech
- Multimeter MBS
- Multimeter MGL Avionics
- Multimeter Rigol
- Multimeter Chauvin Arnoux
- Multimeter Aim TTi
- Multimeter CEM
- Multimeter Horex
- Multimeter Cosinus
- Multimeter Kurth Electronic
- Multimeter Weltron
- Multimeter Rohde & Schwarz
- Multimeter EEVBlog
- Multimeter Weidmüller
- Multimeter HT Instruments
- Multimeter Caltek
- Multimeter Elworks
- Multimeter Qian
- Multimeter Bearware
- Multimeter Noyafa
Nieuwste handleidingen voor Multimeter
17 November 2024
14 November 2024
11 November 2024
22 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
30 September 2024