TFA 35.1080 Handleiding

TFA Weerstation 35.1080

Lees hieronder de 📖 handleiding in het Nederlandse voor TFA 35.1080 (5 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

WEATHER FORECAST CENTER

Instruction manual

INTRODUCTION

The Meteotronic START Weather Forecast Center provides a professional weather forecast for the

current and the next three days. The weather forecasts are made by professional meteorologists and are

sent out with the radio-time signal generator DCF77 in Germany and HBG in Switzerland and can be

received in almost all of Europe. The reception area for the radio-time signal generator is divided into a

total of 90 meteorological regions (60 regions with 4 day forecast, 30 regions with 2 day forecast). The

desired region for the local or holiday location is simply selected and the respectively current weather

forecast is shown on the display. This gives you a quick overview of the weather situation for the following

days at any time. Updating the weather data is done every day.

This weather station allows the reception of weather data of the private provider Meteotime via DCF or

HGB signal without time limit and additional costs.

Meteotime is responsible for the dispatch and the correctness of the transmitted data.

60 regions with 4 days forecast

30 regions with 2 days forecast.

Please read the operating instructions carefully and completely before using for the first time, to

prevent function errors and incorrect operation. Keep the instructions handy for consulting.

WEATHER FORECAST CENTER

DISPLAY

Reception indicator for weather data

• Symbol on Weather data completely received 

•

Symbol flashing Weather data incomplete

Reception indicator for radio-time signal generator

• Symbol flashing Initial reception of date and time 

• Symbol on Time and date are current 

•

Symbol off Time and date have not been updated

Alarm symbol

• Symbol on Alarm function switched on 

• Symbol off Alarm function switched off 

•

Symbol flashing Alarm active or temporarily switched off (Snooze)

CHOOSING THE INSTALLATION LOCATION

Similar to a mobile telephone network or radio/TV reception, the reception of the radio-time receiver may not be

perfect in all locations. Just a couple of notes to make sure that your device works with no problems.

The location of the weather station is very important. This is the reason for the new test function that allows the

quality of reception to be checked in the surrounding area and to position the device in a location that has the best

possible conditions.

Calendar

Alarm time

Reception indicator

for weather data

Alarm ON icon

Time

Indoor

temperature

Time reception signal

Weather forecast

icon (day)

MIN/MAX

temperature

Weather forecast

icon (night)

Today

Tomorrow

(Day 1)

Day 2

Day 3

• Switch on all potential sources of interference (e.g. television) in the area that you want to install the station

during the test!

• Position the device in the location, oriented as you prefer, but at least one meter from the possible source of

interference.

• Activate test mode as described.

•

Monitor the reception display on the weather station. If you have found a location that has good reception,

you can leave the device there and it will retrieve data automatically from the transmitter.

Note!

• The time and date appear within a few minutes.

• The transfer of larger quantities of data for the forecast takes much longer: In order to receive all data, the

station requires 24 hours after start-up.

POSSIBLE SOURCES OF INTERFERENCE

Interferences as with a radio transmitter can occur and could be caused by the following influences:

• In buildings with a lot of concrete, metal parts and electrical systems, reception problems can occur (e.g.

Mall).

• Electrical devices such as television, computer, house-hold devices, etc. or transformers, land lines, radio

transmitters and railways are possible direct sources of interference.

• Atmospheric influences and geographical features (mountains, etc.) can affect the propagation of the radio

waves.

• The distance from the transmitter does also influence the reception. Areas such as Southern Italy or

Northern Scandinavia are also critical areas because of the great distances from the transmitter.

• In all regions, so-called “dead spots” can occur making reception impossible.

•

Weak batteries in the device decrease the quality of reception.

COMMISSIONING AND CONFIGURATION

Inserting batteries/Changing batteries

• Open the battery compartment at the rear of the weather station and insert the three batteries (LR6/ Mignon/

AA), ensuring proper polarity, into the battery compartment.

When disposing of dead batteries, see note on the disposal information.

Note!

All internal data is deleted when you change the batteries. The configuration parameters (weather region,

time zone and contrast) must be entered again (see the following chapter). Receiving all weather data

requires a period of at least 24 hours.

Calling up/exiting the configuration menu

Calling up the configuration menu

• Press the <SET> button for at least three seconds. The first point in the configuration menu (weather region)

is called up.

Product specificaties

Merk:	TFA
Categorie:	Weerstation
Model:	35.1080
Kleur van het product:	Grijs
Alarm functie:	Ja
Afmetingen (B x D x H):	118 x 47 x 140 mm
Type batterij:	AA
Aantal batterijen (receiver):	3
DCF radio klok:	Ja