TFA 35.1078.10.IT Handleiding

TFA Weerstation 35.1078.10.IT

Lees hieronder de 📖 handleiding in het Nederlandse voor TFA 35.1078.10.IT (18 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

Stand

LCD

Display

Function

keys

WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather station as an

example of innovative design and quality piece of engineering. Providing radio

controlled time, date, calendar, Moon phase, indoor and outdoor temperature,

indoor and outdoor relative humidity, and air pressure history information. This

unit will never keep you guessing on current and future weather conditions.

Operation of this product is simple and straightforward. By reading this operating

manual, the user will receive a better understanding of the Weather Station

together with the optimum benefit of all its features.

FEATURES:

The Weather Station

• DCF Radio controlled time with manual setting option

• Time reception ON/OFF (user selectable)

• 12/24 hour time display

• Time zone option ±12 hours

• Weekday and day calendar display (year and month only in setting mode)

• Weather forecasting with weather tendency indicator

Battery

compartment

Hanging hole

• Temperature display in ºC/ºF

• Indoor and outdoor temperature display with MIN/MAX records and time of

reception

• Humidity data display as RH%

• Indoor and outdoor humidity display with MIN/MAX records

• Relative air pressure hPa/ inHg with adjustable reference value

• Weather icon sensitivity setting

• Relative air pressure history for the past 24 hours (electronic barometer

with barometric pressure trend)

• LCD contrast selectable

• Wireless transmission at 868 MHz

• Signal reception intervals at 4 seconds

• Can receive up to 3 outdoor transmitters

• Low battery indicator

• Table standing or wall mounting

Thermo-Hygro Transmitter

• Remote transmission of outdoor temperature and humidity

to Weather Station by 868MHz

• Shower proof casing

• Wall mounting case

• Mounting at a sheltered place. Avoid direct rain and

sunshine

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER

STATION

The Weather Station uses 3 x AA, IEC LR6, 1.5V

batteries. To install and replace the batteries,

please follow the steps below:

1. Insert finger or other solid object in the space

at the bottom center of the battery

compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity

(see marking).

3. Replace compartment cover.

TO INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO

TRANSMITTER

The outdoor Thermo-hygro transmitter uses 2 x AA IEC LR6,

1.5V batteries. To install and replace the batteries, please follow

the steps below:

1. Remove the battery cover at the front side with a small

screwdriver.

2. Insert the batteries, observing the correct polarity (see

battery compartment marking).

3. Replace the battery cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by

following the setting up procedures. This is due to a random security code

assigned by the transmitter at start-up. This code must be received and stored by

the Weather Station in the first 3 minutes of power being supplied to the

transmitter.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to

ensure optimum accuracy of these units.

Please participate in the preservation of the environment. Return

used batteries to an authorized depot.

SETTING UP

WHEN ONE TRANSMITTER IS USED

1. First, insert the batteries in the transmitter (see “How to install and

replace batteries in the Termo-hygro outdoor transmitter ” above).

2. Within 2 minutes of powering up the transmitter, insert the batteries in the

Temperature Station (see “How to install and replace batteries in the

Weather Station ” above). Once the batteries are in place, all segments of

the LCD will light up briefly. Following the indoor temperature/humidity and

the time as 0:00 will be displayed. If these information are not displayed on

the LCD after 60 seconds, remove the batteries and wait for at least 60

seconds before reinserting them. Once the indoor data is displayed user

may proceed to the next step.

3. After the batteries are inserted, the Weather station will start receiving data

signal from the transmitter. The outdoor temperature and humidity data

should then be displayed on the Weather station. If this does not happen

after 2 minutes, the batteries will need to be removed from both units and

reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, the distance

Product specificaties

Merk:	TFA
Categorie:	Weerstation
Model:	35.1078.10.IT
Kleur van het product:	Grey, Silver
Afmetingen (B x D x H):	100 x 35 x 180 mm
Type batterij:	AA
Aantal batterijen (receiver):	3
Min/Max temperatuur geheugen:	Ja
Vochtigheid meetbereik (buiten) (H-H):	1 - 99 procent
Temperature measurement range (outside) (T-T):	-40 - 60 °C
Aantal batterijen (sensor):	2
Temperature measurement range (inside) (T-T):	-10 - 60 °C
Aantal sensoren ondersteund (max):	3