Texas Instruments SN74CBTD1G384DBVR Handleiding

Texas Instruments Niet gecategoriseerd SN74CBTD1G384DBVR

Lees hieronder de 📖 handleiding in het Nederlandse voor Texas Instruments SN74CBTD1G384DBVR (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/15

www.ti.com

FEATURES

VCC

GND

DBVPACKAGE

(TOP VIEW)

A VCC

GND

Seemechanicaldrawingsfordimensions.

DCKPACKAGE

(TOP VIEW)

DESCRIPTION/ORDERING INFORMATION

SN74CBTD1G384

SINGLE FET

WITH LEVEL

SCDS066K – JULY 1998

• Ω5- Switch Connection Between Two Ports

JESD 78, Class II

•TTL-Compatible Control Input Levels

The SN74CBTD1G384 features a single high-spe

( OE) input is high. A diode to V

CC is integrated on the chip to allow

device inputs to 3.3-V signals at the device outpu

ORDERING INFORMATION

TAPACKAGE(1) ORDERABLE PART NUMBER

(2)

Reel of 3000 SN74CBTD1G384DBVR

SOT (SOT-23) – DBV P8D_

Reel of 250 SN74CBTD1G384DBVT

–40 C to 85 C° °

Reel of 3000 SN74CBTD1G384DCKR

SOT (SC-70) – DCK P8_

Reel of 250 SN74CBTD1G384DCKT

(1) Package drawings, standard packing quantities, therma

www.ti.com/sc/package.

(2) The actual top-side marking has one additional character

FUNCTION TABLE

INPUT FUNCTION

L A port = B port

H Disconnect

LOGIC DIAGRAM (POSITIVE

Please be aware that an important notice concerning

Instruments semiconductor products and disclaimers

PRODUCTION DATA information is current as of publication date.

Products conform to specications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

www.ti.com

Absolute Maximum Ratings

(1)

Recommended Operating Conditions

(1) (2)

Electrical Characteristics

SN74CBTD1G384

SINGLE FET BUS SWITCH

WITH LEVEL SHIFTING

SCDS066K – JULY 1998 – REVISED JUNE 2006

over operating free-air temperature range (unless

MIN MAX UNIT

VCC Supply voltage range –0.

VI Input voltage range

(2) –0.5 7 V

Continuous channel current

IIK Input clamp current V

I/O < 0 –50 mA

DBV package 206

θJA Package thermal impedance

(3) ° C/W

DCK package 252

Tstg Storage temperature range

(1) Stresses beyond those listed under "absolute maximum

only, and functional operation of the device at these or

conditions" is not implied. Exposure to absolute-maximum-rated

(2) The input and output negative-voltage ratings may be

(3) The package thermal impedance is calculated in accorda

MIN MAX UNIT

VCC Supply voltage 4.5

VIH High-level control input voltage

VIL Low-level control input voltage

TA Operating free-air temperature

(1) All unused control inputs of the device must be held a

CC or GND to ensure proper device o

Implications of Slow or Floating CMOS Inputs, literature

(2) In applications with fast edge rates, multiple outputs

level-shifting eect.

over recommended operating free-air temperature

PARAMETER TEST CONDITIONS (1) MAX UNIT

VIK VCC = 4.5 V, I

I = –18 mA –1.2

VOH See Figure 2

IIVCC = 5.5 V, V

I = 5.5 V or GND ±

ICC VCC = 5.5 V, I

O = 0, V

I = V

CC or GND 1.5 m

∆I

CC (2) Control input V

CC = 5.5 V, One input at 3.4 V, Other inputs

CC or GND 2.5 m

Ci Control input V

I = 3 V or 0 2 pF

Cio(OFF) VO = 3 V or 0, OE = V

CC 3.5 pF

II = 64 mA 5 7

VI = 0

ron (3) VCC = 4.5 V I

I = 30 mA 5 7 Ω

VI = 2.4 V, I

I = 15 mA 35 50

(1) All typical values are at V

CC = 5 V, T

A = 25 C°

(2) This is the increase in supply current for each input tha

CC or GND.

(3) Measured by the voltage drop between the A and the

determined by the lower of the voltages of the two (A or

2 Submit Documentation Feedback

www.ti.com

Switching Characteristics

SN74CBTD1G384

SINGLE FET

WITH LEVEL

SCDS066K – JULY 1998

over recommended operating free-air temperature

L = 50 pF (unless otherwise note

FROM TO

PARAMETER MIN

(INPUT) (OUTPUT)

tpd (1) A or B B or A 0.25

ten OE A or B 2 5.9

tdis OE A or B 1 4.7

(1) The propagation delay is the calculated RC time constant

capacitance, when driven by an ideal voltage source (z

Submit Documentation Feedback

Product specificaties

Merk:	Texas Instruments
Categorie:	Niet gecategoriseerd
Model:	SN74CBTD1G384DBVR
Breedte:	3.05 mm
Diepte:	1.75 mm
Hoogte:	1.1 mm
Breedte verpakking:	201 mm
Diepte verpakking:	202 mm
Hoogte verpakking:	28 mm
Soort:	Logic IC
Type verpakking:	SOT-23
Aantal per verpakking:	3000 stuk(s)
Temperatuur bij opslag:	-65 - 150 °C
Bedrijfstemperatuur (T-T):	-40 - 85 °C
Aantal pinnen:	5
Breedte (met pennen):	3.05 mm
Diepte (met pennen):	3 mm
Hoogte (met pennen):	1.25 mm