Techno Line WS 7208 Handleiding

Techno Line Weerstation WS 7208

Lees hieronder de 📖 handleiding in het Nederlandse voor Techno Line WS 7208 (10 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

Holder

Detachable

stand



Weather Station

INTRODUCTION:

Congratulations on purchasing this innovative 433MHz Weather Station which displays the

weather forecast, time, indoor temperature, and up to three outdoor temperature readings.

To enjoy the full benefits of this innovative product, please read this operating manual.

Weather Station:

FEATURES:

DCF radio-controlled time reception

LCD clock in 24 hour time display

Indoor and outdoor temperature reading in degree Celsius (°C)

Indoor and outdoor temperature with Minimum and Maximum records

Weather tendency indicator and weather icons

Can receive up to three Outdoor transmitters

Table standing or wall mountable (detachable table stand)

Temperature Transmitter:

Function Keys

Hanging

hole

SETTING UP:

Please follow these steps to ensure that your new Weather Station works correctly with the

temperature transmitter(s):

1. First, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather Station. Once the

batteries are in place, all segments of the LCD will light up briefly. Then the indoor

temperature, the time as -:--, and the weather icons sun and clouds will be

displayed. If the indoor temperature is not displayed after a few seconds, remove the

batteries and wait for at least 30 seconds before reinserting them. Once the indoor

data is displayed proceed to step 2.

2. Within 1-1/2 minutes of activating the Weather station, place 2 x AAA, IEC LR3, 1.5V

batteries into the transmitter.

3. After a few seconds of inserting the batteries into the transmitter, the Weather

Station will start receiving data from the transmitter. The remote temperature will

then be displayed on the Weather Station. If this does not happen after 2 minutes,

the batteries will need to be removed from both units and reset from step 1.

Battery cover

4. The Weather Station can take up to 3 remote transmitters. If you have purchased

additional transmitters, follow step 2 for all extra transmitters. However, ensure that

you leave 10 seconds in between the reception of the last transmitter and the set-up

of the following transmitter. The Weather Station will number the transmitters in the

order of set-up, i.e. the first transmitter will have the temperature displayed with the

channel number 1 against it and so on.

Battery

compartment

Note:

No channel number will show up if there is only one transmitter used.

Battery cover Battery

compartment

5. When all the transmitters are set up, there is a testing period, during which the

display switches quickly between all the received transmitters at random, according

to which random transmission it receives. Pressing any key will stop this process

and the display will show the temperature for the first transmitter. The process also

stops automatically if no keys are pressed for a few minutes.

6. The DCF-77 time code reception is automatically started just after the Weather

Station is activated. This takes typically between 3 - 5 minutes in good conditions.

This time period is an excellent opportunity to locate the transmitter(s) in suitable

location(s) outdoors. In order to ensure sufficient 433 MHz transmission however,

this should under good conditions be no more than 20 - 25 meters from where the

Weather Station will be finally positioned (see notes on “Positioning” and “433 MHz

Reception”).

7. If after 10 minutes the DCF time has not been received, use the SET key to

manually enter a time initially. The clock will automatically attempt each hour to

receive the DCF time. When this is successful, the received time will override the

manually set time.

Note:

Should the total time of inserting the batteries into the transmitters take longer than 1-1/2

minutes from the time of inserting the batteries into the Weather Station then temperature

reception problems may occur. If the temperature is not being received, then see Checking

for 433 MHz reception, before resetting the units (see Resetting the Weather Station

below).

In the event of changing batteries in any of the units, all units need to be reset by following

the setting up procedures. This is because the transmitter at start-up assigns a random

security code and this code must be received and stored by the Weather Station in the first

1-1/2 minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure

optimum accuracy of these units.

Please participate in the preservation of the environment. Return used

batteries to an authorized depot.

LCD SCREEN

The Weather Station’s LCD is split into 5 sections displaying the information for time,

weather forecast, indoors and outdoors.

All the segments will light up momentarily before displaying:

1. Weather Icon

2. Time “-:--“

3. Indoor temperature in degree Celsius (°C)

4. Hidden Max/Min icon for Indoor/Outdoor Temperature and Transmitter Identification

Number

5. Outdoor Temperature in °C

Product specificaties

Merk:	Techno Line
Categorie:	Weerstation
Model:	WS 7208
Kleur van het product:	Zwart, zilver
Ophangsysteem voor aan de muur:	Ja
Min/Max temperatuur geheugen:	Ja
DCF radio klok:	Ja
Aantal sensoren ondersteund (max):	3