Technisat Satman Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Technisat Satman (8 pagina's) in de categorie Satellietontvanger. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
DigiDish 33
DigiDish 45
Satman
Satman 45
Multytenne 45
For wall mounting
Installation instructions
1
Dear customer,
thank you for purchasing one of the quality products produced by TechniSat. In order to ensure that the
quality of the product remains constant over many years, both the dish and the mounting bracket are
made of aluminium.
Please read the installation instructions carefully befor4e proceeding with the installation, to ensure that
you can enjoy optimum reception performance after installation.
Before starting the installation, please check that you have received all parts and components of the
external unit.
Items supplied (see illustrations 1 and 2)
Item Article
1 AZ/EL bracket with LNB holding bracket and swivel profile
2 Dish antenna
3 Connector
4 Wall mount*: “short” or “medium” or “long”
5 LNB
6 LNB holding bracket with 2 screws M3x30, 2 nuts M3, 2 washers**
A Screws M6x15, 4 nuts M6, 4 washers
D Screws for the adjustment of the elevation angle
* Contents vary with package selected
**only with DigiDish
Illustration 1 Illustration 2
2
1 Mounting the external unit
When you unpack the external unit, you will find that it has already been partly pre-
assembled, so all you need to do is to mount the dish (item 2) and the connector piece
(item 3).
First, use the screws (A) to attach the dish to the AZ/EL bracket (item 1). Then loosen
the screw (B) on the swivel profile in order to mount the connector piece. Then mount
the LNB (item 5) on the LNB holder, using the LNB holding bracket (item 6) as shown in
illustration 1.
2 Installation
Selecting a location
a) First ensure there is an uninterrupted line of sight from the intended mounting
position in a southerly direction in order to receive signals from the satellite position
ASTRA 19,2° East. With the aid of the illustration below you can see whether you
have left enough space with regard to any neighbouring obstruction, in order to avoid
the signal being weakened by such an obstruction. When mounting the dish below a
terrace, please ensure that it is not in the shadow of a projecting roof.
b) Now attach the wall mount (item 4) horizontally at the location selected. In order to
ensure an optimum hold fort he external unit, you should select appropriate fastening
materials (dowels, screws, etc.). Because of the huge variety of wall conditions found
in practice, no fastening materials for mounting he wall mount is supplied with the
package.
c) Loosen the screw (C) on the wall mount, and attach the external unit using the
connector piece.
Angle A
(elevation)
Gradient
B
(cm per
m)
22° 40,40
24° 44,52
26° 48,77
28° 53,17
29° 55,40
30° 57,74
31° 60,00
32° 62,49
33° 64,90
34° 67,45
35° 70,02
36° 72,65
37° 75,36
38° 78,13
3


Product specificaties

Merk: Technisat
Categorie: Satellietontvanger
Model: Satman

Heb je hulp nodig?

Als je hulp nodig hebt met Technisat Satman stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Satellietontvanger Technisat

Handleiding Satellietontvanger

Nieuwste handleidingen voor Satellietontvanger