Technical Pro LGMEGAX Handleiding
Technical Pro
Effect machine
LGMEGAX
Lees hieronder de 📖 handleiding in het Nederlandse voor Technical Pro LGMEGAX (14 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/14
User Manual for:
Professional DJ Multi Pattern Laser & LED
Stage Effect Light With DMX
MODEL: LGMEGAx
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE ARE NO
USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of "dangerous" voltage
within the product's enclosure that may be of sufcient magnitude to constitute a risk of electric shock to humans. Users should exhibit extra safety
when this symbol appears in this instruction manual and follow all precautions as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in this manual.
1- Read these instructions thoroughly before using this item.
2- Keep these instructions for future reference.
3- Heed all warnings.
4- Follow all instructions.
5- WARNING: To prevent re or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including ampliers) that produce
heat.
8- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a round grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not t your outlet, consult an
electrician for the replacement of the obsolete outlet.
9- Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from the unit. When removing
the cord from the power outlet, remove it by holding the plug not by pulling the cord.
10- Unplug the unit during lightning storms or when unused for long periods of time.
11- When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
12- This product is intended for indoor use only! To prevent risk of re or shock, do not expose xture to rain or moisture.
13- Make sure the distance between the xture and the lighted object is not less than 0.5 meters. Make sure there are no combustible or explosive objects 0.5
meters around the xture. Be sure that no ventilation slots are blocked.
14- Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse source.
15- Secure xture to fastening device using a safety chain.
16- Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate xture at temperatures higher than this.
17- In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by
unskilled people can lead to damage or malfunction. Please contact Technical Pro for the nearest authorized technical assistance center.
18- Never connect the device to a dimmer pack.
19- Make sure the power cord is never crimped or damaged.
20- Never disconnect the power cord by pulling or tugging on the cord.
21- Never carry the xture directly from the cord. Always use the hanging/mounting bracket.
22- Avoid direct eye exposure to the light source while it is on.
23- Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once all the equipment is ON
slowly raise the volume or level controls to their proper positions.
24- When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit.
25- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers, brackets and associated equipment
for damage. Any missing, corroded, deformed, or non-load rated component could signicantly reduce the strength of the installation, placement or array. Any
such condition severely reduces the safety of the installation and should be immediately corrected. Use only hardware which is rated for the loading
conditions of the installation and any possible short-term, unexpected overloading. Never exceed the rating of the hardware or equipment.
26- Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national regulations regarding the
safety and operation of equipment are understood and adhered to.
27- Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Introduction
Congratulations and thank you for your purchase of this Technical Pro LED stage eect light. To get the most from your unit
it is recommended that you review all of the information provided in this instruction manual before operating this equipment.
LGMEGAx
3
Unpacking Instructions
Thanks for chasing our laser xture, believe this brand new product will bring you unlimited marvel and happiness.
Before operating this device, please read this manual thoroughly, and retain if for future reference.
Warning:
If the external exible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord
exclusively available from the manufacturer or his service agent.
Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their
effectiveness is impaired, for example by cracks or deep scratches.
The lamps shall be changed if it has become damaged or thermally deformed.
As receiving a xture, carefully unpack the carton, checking contents to ensure that all parts are in good condition.
Informing the shipper immediately and retaining packing material for inspection if any parts damaged from shipping or
device damaged, keep packing materials as evidence for shipper’s conrmation.
Attention!
This unit is perfect condition before delivery, please check all accessories when unpacking the un it, you should follow
this user manual to operate this unit, and make sure that you are clear on all laser safety information and unit operation
before power it on. Any wrong operation will make this unit out of warranty.
Carefully move after receiving it, checking whether there is any damage from shipping, and all the accessories in it.
LGMEGAx: 1pc
Power Cord:1pc
Keys: 2pcs
Interlock Switch: 1pc
User’s Manual: 1pc
Warranty Card: 1pc
LGMEGAx
Product specificaties
Merk: | Technical Pro |
Categorie: | Effect machine |
Model: | LGMEGAX |
Heb je hulp nodig?
Als je hulp nodig hebt met Technical Pro LGMEGAX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Effect machine Technical Pro
18 Mei 2024
Handleiding Effect machine
- Effect machine BeamZ
- Effect machine Behringer
- Effect machine HQ
- Effect machine HQ Power
- Effect machine Konig
- Effect machine Manta
- Effect machine Martin
- Effect machine Max
- Effect machine Midas
- Effect machine Monacor
- Effect machine Nedis
- Effect machine Pyle
- Effect machine Showtec
- Effect machine Velleman
- Effect machine Viking
- Effect machine JB Systems
- Effect machine Monoprice
- Effect machine NGS
- Effect machine Steren
- Effect machine Eurolite
- Effect machine American DJ
- Effect machine Antari
- Effect machine Chauvet
- Effect machine QTX
- Effect machine Valcom
- Effect machine Karma
- Effect machine Adj
- Effect machine Elation
- Effect machine Valueline
- Effect machine Fredenstein
- Effect machine TC Electronic
- Effect machine Elysia
- Effect machine Stairville
- Effect machine Black Lion Audio
- Effect machine Laserworld
- Effect machine TCM FX
- Effect machine Drawmer
- Effect machine ColorKey
- Effect machine Evo-Lite
- Effect machine Blizzard
- Effect machine Hazebase
- Effect machine IGS Audio
- Effect machine Cameo
- Effect machine Sagitter
- Effect machine DJPower
- Effect machine Doepfer
- Effect machine Fun Generation
- Effect machine Lotronic
- Effect machine IMG Stage Line
- Effect machine Lexicon
- Effect machine Futurelight
- Effect machine The Confetti Maker
- Effect machine Eliminator Lighting
- Effect machine BoomTone DJ
- Effect machine Klark Teknik
- Effect machine Lab Gruppen
- Effect machine Audibax
- Effect machine Magmatic
- Effect machine Rosco
- Effect machine Showven
Nieuwste handleidingen voor Effect machine
2 November 2024
2 November 2024
2 November 2024
2 November 2024
2 November 2024
2 November 2024
2 November 2024
2 November 2024
2 November 2024
4 September 2024