TeachLogic SM-401 Handleiding

TeachLogic Microfoon SM-401

Lees hieronder de 📖 handleiding in het Nederlandse voor TeachLogic SM-401 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

USER GUIDE

SM-401 Shelf Mount Bracket

(1)

Use the brackets to secure a TeachLogic® ampliﬁer/receiver to a wall or a ﬂat surface above or below the ampliﬁer. The

pair of brackets may be used in a manner that allows for quick installation, or one that conceals the bracket behind the

ampliﬁer with minimal visibility.

Note: The two brackets are mirror images of one another. Each bracket has a longer side and a shorter side. These are

referred to as the “long ﬂange” and the “short ﬂange”.

The “central cutout” in both ﬂanges is provided so that the ventilation slots in the ampliﬁer case are not blocked.

Short

Flange

Long Flange

Central Cutout

SUPPLIED ARE FOUR SILVER SELF-TAPPING SCREWS THAT WILL REPLACE THE FOUR SILVER SCREWS THAT

HOLD THE METAL AMPLIFIER CASE ONTO THE PLASTIC AMPLIFIER CHASSIS. THE SUPPLIED SCREWS ARE

LONGER THAN THE ONES BEING REPLACED.

DO NOT USE ANY OTHER SCREWS AS THEY MAY DAMAGE THE ELECTRONICS INSIDE AND/OR THEY MAY

NOT ADEQUATELY ENGAGE THE PLASTIC CHASSIS AND SECURE IT IN PLACE.

ALWAYS UNPLUG THE AMPLIFIER FROM ITS POWER SUPPLY PRIOR TO INSTALLATION.

CAUTION

A: 1 x LH bracket B: 1 x RH bracket C: 4 x Silver 11mm self-

tapping Screws

CONTENTS

Short

Flange

Remove screws

QUICK MOUNT METHOD. This is ideal for most applications. The ampliﬁer can be mounted above or below the

mounting surface such as a desk, shelf, or wall. The long ﬂange can be faced away from, or toward the ampliﬁer, and

can be its top or bottom.

3. Use the 4 supplied silver 11mm self-

tapping screws (C) to secure the short

ﬂange to the side of the ampliﬁer. Then

mount to the desired surface with a

fastener (not supplied) at each end of

each bracket.

(2)

THERE ARE MULTIPLE METHODS TO MOUNT THE SM-401 BRACKETS. TAKE CARE TO DETERMINE THE

ORIENTATION THAT BEST SUITS YOUR NEED PRIOR TO STARTING.

ALWAYS UNPLUG THE AMPLIFIER FROM ITS POWER SUPPLY PRIOR TO INSTALLATION.

1. Determine mount orientation. There

are 4 variations to accomodate needs:

1. bottom/out (shown below left), 2.

bottom/in, 3. top/out, 4. top/in (shown

below right).

2. Remove the existing side screws that

secure the amp cover to the chassis.

1. Determine top vs. bottom mount

orientation (top mount shown).

2. Remove the existing side screws that

secure the amp cover to the chassis.

3. Use the 4 supplied silver 11mm self-

tapping screws (C) to secure the short

ﬂange to the side of the ampliﬁer.

INSTALLATION

SM-401 Shelf Mount Bracket

FLUSH MOUNT METHOD. The long ﬂange faces in and only the ‘ears’ of the long ﬂange protrude out from back

of the amp. This requires the installer to pre-mark the mounting location, mount the brackets, then attach the amp to

the brackets after they’re securely fastened to the mounting surface.

4. Hold the amp in the desired mounting

location. Using a pencil, mark 3-4 sides

of the brackets on the mounting surface

to ensure a precise ﬁt in the next steps.

5. Remove brackets from amp. Align

the brackets with your marks from step

4. Attach brackets to mounting location

with 2 fasteners per bracket.

6. With brackets securely mounted,

reattach amp to brackets with silver

11mm self-tapping screws (C).

rev20200330

Product specificaties

Merk:	TeachLogic
Categorie:	Microfoon
Model:	SM-401
Kleur van het product:	Zilver
Merkcompatibiliteit:	TeachLogic
Compatibiliteit:	Forum Receiver Amplifier, Maxim Receiver Amplifier, \nSpectrum Receiver Amplifier
Type product:	Mount Kit