Tannoy iW 62 BACKCAN Handleiding

Tannoy Speaker iW 62 BACKCAN

Lees hieronder de 📖 handleiding in het Nederlandse voor Tannoy iW 62 BACKCAN (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 82 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Quick Start Guide
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be su ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical speci cations,
appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic,
TC Helicon, Behringer, Bugera and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2018 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
iW 62 BACKCAN
Pre-Install backcan for iW 62DS-WH and iW 62S-WH In-Wall Loudspeakers
IN WALL INSTALLATION
(1) Using screws that are at least ¾ " long, a x backcan to studs or joists. Tannoy recommends a
minimum of 8 screws.
(2) Run appropriate gauge and type of wire for your particular installation to the backcan location.
½ " or ¾ " conduit is also an option.
(3) Install a suitable connector for wire chosen into the ½ " or ¾ " knock out. Run wire through connector,
leaving enough length to reach the loudspeaker with excess for ease of connection.
(4) Leave excess wire in the backcan until drywall or desired  nishing is complete.
(5) The  ange on the front of the backcan will protrude through the drywall and act as a guide for
drywall installation.
(6) After desired  nishing is complete, connect the previous installed wire in the backcan to the red (+)
and black (-) terminals on the chosen loudspeaker model. An optional ground wire may be used to
reduce RF interference.
(7) Follow installation instructions found in the loudspeaker quick start guide for  nal speaker installation.
For technical assistance: Tannoy UK +44 1562 732290 or visit our website at tannoy.com.
(1
)
(1) Alignment tags for in wall mounting
96.7mm
3.81"
310.0mm
12.20"
1143.0mm
45.00"
89.1mm
3.51"
436.0mm
17.17"
1200.0mm
47.24"
199.0mm
7.83"
451.0mm
17.76"
101.6 mm min
4.00" min
12.5 mm min
0.49" min
iW 62 BACKCAN Dimensions


Product specificaties

Merk: Tannoy
Categorie: Speaker
Model: iW 62 BACKCAN

Heb je hulp nodig?

Als je hulp nodig hebt met Tannoy iW 62 BACKCAN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Tannoy

Handleiding Speaker

Nieuwste handleidingen voor Speaker