Tamron 18-270mm F 3.5-6.3 Di II VC LD - B003 Handleiding

Tamron Lens fotocamera 18-270mm F 3.5-6.3 Di II VC LD - B003

Lees hieronder de đź“– handleiding in het Nederlandse voor Tamron 18-270mm F 3.5-6.3 Di II VC LD - B003 (7 pagina's) in de categorie Lens fotocamera. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
R
18-270mm F/3.5-6.3
Di II VC LD Aspherical [IF] (Model B003)
Thank you for purchasing the Tamron lens as the latest addition to your photographic
equipment. Before using your new lens, please read the contents of this Owner’s Manual
thoroughly to familiarize yourself with your lens and the proper photographing
techniques for creating the highest quality images possible. With proper handling and
care, your Tamron lens will give you many years of photographing beautiful and exciting
pictures.
NOMENCLATURE
1. Lens hood
2. Hood attaching alignment mark
3. Hood attached indicator
4. Filter ring
5. Hood attaching bayonet ring
6. Focusing ring
7. Distance scale
8. Distance index
9. Zooming ring
10. Focal length scale
11. Zoom lock switch (Fig. 3 & 4)
12. VC (Vibration Compensation) switch
13. AF/MF switch (Fig. 5 & 6)
14. Zoom index mark
15. Lens attachment mark
16. Lens mount/Lens mount contacts
ATTACHING AND REMOVING THE LENS
* How to mount the lens
Remove the rear cap of the lens. Align the lens attachment mark on the lens barrel with
its counterpart on the camera mount and insert the lens.
In case of Nikon mount, rotate the lens counter-clockwise until it clicks into the locking
position. In case of Canon mount, rotate the lens clockwise until it clicks into the locking
position.
* How to detach the lens
Press the lens release button on the camera down.
In case of Nikon mount, rotate the lens clockwise until it unlocks from the camera.
In case of Canon mount, rotate the lens counter-clockwise until is unlocks from the
camera.
*For further details, please read the instruction manual of your camera.
FOCUSING (AUTOFOCUS)
Switch the AF/MF switch on the lens to AF (Fig. 5). In case of Nikon camera with the
focus mode selector dial, set the focus mode to “S” or “C”, and then set the AF/MF
switch on the lens side to “AF”. Press the shutter button lightly while viewing through the
camera’s viewfinder. The lens focuses automatically. An in-focus mark will light when
lens focuses on the main subject sharply. Press the shutter button further to photograph.
* When set on AF mode, interfering with the focusing ring may cause serious damage to
the lens mechanism.
* The distance scale is marked for guidance purposes. The actual focal point may slightly
differ from the distance marked on the focal length index.
FOCUSING (MANUAL FOCUS)
Switch the AF/MF switch on the lens to MF (Fig. 6). In case of Nikon camera with the
focus mode selector dial, set the focus mode to “M”, and then set the AF/MF switch on
the lens side to “MF”. Focus manually by rotating the focusing ring while viewing
through the camera’s viewfinder. The main subject in the viewfinder will be sharp when
the lens id focused correctly.
* Even when in MF mode, turning the focusing ring while pressing the shutter button
halfway, the focus aid function lamp lights up when the picture is in focus.
* At infinity, make sure the image in the viewfinder appears sharp. The infinity position
is made with certain allowances to insure proper focus under a variety of conditions.
* For further details, please read the instruction manual of your camera.
VC Mechanism
VC (Vibration Compensation) is a mechanism which reduces the image blur caused by
hand-held shooting. When using the VC, pictures can be taken at shutter speeds up to a
maximum of 4 stops slower than the speed when the VC is not used.


Product specificaties

Merk: Tamron
Categorie: Lens fotocamera
Model: 18-270mm F 3.5-6.3 Di II VC LD - B003

Heb je hulp nodig?

Als je hulp nodig hebt met Tamron 18-270mm F 3.5-6.3 Di II VC LD - B003 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden