Taga Harmony TSF-002 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Taga Harmony TSF-002 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
TSF-002
FLOORSTANDING SPEAKER FEET AND SPIKES
Instruction Manual
Edition 09-2020
2
Safety Instructions
1. Read Instructions - All the safety and operating instructions should be read before the
product is operated.
2. Retain Instructions - The safety and operating instructions should be retained for fu-
ture reference.
3. Heed Warnings - All warnings on the product and in the operating instructions should
be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - do not use liquid cleaners or aerosol cleaners.
6. Water and Moisture - Do not use this product near water - for example, near a bath
tub, wash bowl, kitchen sink or laundry tub; in a wet basement; or near a swimming
pool; and the like.
7. Accessories - Do not place the speaker after installing the feet or spikes on an unsta-
ble cart, stand, tripod, bracket or table. The product may fall, causing serious injury
to a child or adult and serious damage to the product. Any mounting of the product
should follow manufacturer’s instructions and should use a mounting accessory rec-
ommended by the manufacturer.
8. Heat - The product should be situated away from heat sources such as radiators, heat
registers, stoves or other products that produce heat.
9. Operating Environment - Operating environment temperature and humidity of the unit:
+5°C to +35°C (+41°F to +95°F); less than 85% RH.
An exclamation mark in a triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
EN_safety_TSF_09-20
The weight of the speaker which is installed
on 4 feet with spikes or only 4 spikes should
not exceed 45 kg (99.21 lbs).
For installation use only hardware and accessories provided
with this product.
This product is designed for the speakers which are compatible
and recommended by the manufacturer.
Compatible speakers are listed on www.TagaHarmony.com
3
Introduction
TheTSF-002 feet and spikes may be supplied with your speaker or separately.
For new speakers - before unpacking!
To prevent damage to the speaker choose one of the below
installation options:
A1 - install the feet and spikes, while the speaker is still in the
carton. Place the carton with the speaker on the oor in the
upside down position and open it from the bottom and remove the
protective bag from the bottom of the speaker or;
A2 - take out the speaker from the carton without removing it from
a protective bag. Place the speaker securely on a stable surface in
a horizontal position above the oor level. Remove the protective
bag from the bottom of the speaker.
Two installation options for your choice:
I. To install feet and spikes or;
II. To install the spikes only
TAGA Harmony recommends the îš¿rst option.
Note! The actual speaker shape and the placement of feet and spikes may vary from
the ones shown in the îš¿gures.
Required tool (not supplied with this product)- cross screwdriver.
Bolt M8 (x8)
D
Top pad (x4)
B
Content (set for 1 piece of speaker):


Product specificaties

Merk: Taga Harmony
Categorie: Niet gecategoriseerd
Model: TSF-002

Heb je hulp nodig?

Als je hulp nodig hebt met Taga Harmony TSF-002 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Taga Harmony

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd