Tado Starter Kit - Wireless Smart Thermostat V3 plus Wireless Receiver and Wireless Temperature Sensor Thermostaat Handleiding

Tado Thermostaat Starter Kit - Wireless Smart Thermostat V3 plus Wireless Receiver and Wireless Temperature Sensor Thermostaat

Lees hieronder de 📖 handleiding in het Nederlandse voor Tado Starter Kit - Wireless Smart Thermostat V3 plus Wireless Receiver and Wireless Temperature Sensor Thermostaat (8 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 113 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

This manual is meant exclusively for professional installers. It includes generic instructions to install the Wireless

Receiver and the Wireless Temperature Sensor.

Manual for Professional

Installers

For the Starter Kit - Wireless Smart Thermostat V3+

English International

Manual version 3.2

DIY Installation

If you are not a professional installer, please download the tado˚ app. There you will find specific installation instructions.

A. Remove the battery

protection strip.

B. Press the button for

3 sec to start pairing.

C. Pairing may take up

to 2 min.

D. The static icon below

indicates successful pairing.

If pairing fails (E0), make sure the distance between the devices is approximately 3 meters. Pair again by pressing the

button for 3 sec.

2. Pair the Wireless Temp. Sensor

1. Install the Internet Bridge

A. Connect the Internet Bridge to the router.

If no free USB port is available on the router, use the

included 5V power adapter.

B. Press and hold the pairing button until the pairing LED

starts blinking.

min

sec

Solid on

Blinking

Power supply Connection with other

tado˚ devices

Device errors Heat request

When tado˚ is requesting heat, the Heat request symbol will either fade in and out or be solid ON. When OFF, tado°

is not requesting heat.

Unfold to check:

Step 4: Wire the Wireless Receiver

Step 5: Pair the Wireless Receiver

Step 6: Configuration

Extra information: Wireless Receiver Symbols

A. Mount the Wireless Temperature Sensor to the wall

using the included screws or the adhesive pads.

B. Mount the Wireless Receiver to the wall using the

included screws.

3. Mount tado˚ devices

Click

Don‘t plug in

to power until

the cover is on.

Product specificaties

Merk:	Tado
Categorie:	Thermostaat
Model:	Starter Kit - Wireless Smart Thermostat V3 plus Wireless Receiver and Wireless Temperature Sensor Thermostaat

Heb je hulp nodig?

Als je hulp nodig hebt met Tado Starter Kit - Wireless Smart Thermostat V3 plus Wireless Receiver and Wireless Temperature Sensor Thermostaat stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag