Tacx Flow computer Handleiding

Tacx Hometrainer Flow computer

Lees hieronder de 📖 handleiding in het Nederlandse voor Tacx Flow computer (27 pagina's) in de categorie Hometrainer. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/27
Flow
EN | NL | DE | FR
ES | IT | CH | JP
Operating computer
2 3
EN
NL
DE
JP
IT
ES
FR
CH
Flow Computer 4
Flow Computer 10
Flow Computer 16
Ordinateur Flow 22
Ordenador del Flow 28
Computer Flow 34
Flow ーター 46
Flow 电脑 40
4 5
EN
NL
DE
JP
IT
ES
FR
CH
Function during configuration
Press in combination with MODE key for 10 seconds to enter the SETUP menu
(countdown appears)
Change setting
Change setting
Next step
Exit the SET UP menu
Function during cycling
Select training type based on slope or power
Change training setting
Page through display functions
Change training setting
Page through display functions
Page through MODE functions
Confirm training type
Resetting training information
When you are not cycling, you can reset the ETM, TRP, MAX and AVS training information by
pressing the SET and MODE keys at the same time for 2 seconds. It is not possible to reset the
ODO (the total number of kilometres cycled on the trainer). Once it has reached 99,999 km it will
automatically reset to 0 km (or miles). All the trip data is also reset when the Flow computer is
switched off. When the computer is restarted everything is set to 0 again, except the ODO.
Keys and their functions
SET
MODE
SET
MODE
When you put the plug into the wall socket, the entire display lights briefly as a test. Then various
parameters are shown for two seconds:
• frequency(50or60Hz)andvoltage(110or220V)ofthemainspower
• versionnumberofthefirmware
• scalefactor(100%)
• bodyweight(75kg)
• speedindicationandtripenergyconsumption(km/h,kJoule)
Then the start screen appears. If you want to use the standard settings, you can begin straight away.
If not, follow the instructions below.
Press SET and MODE at the same time for 10 seconds. Now the text SET UP appears on the display
and the body weight flashes.
Weight
Body weight (without bicycle) flashes. You can use the Up arrow or Down arrow to set the
weight between 40 and 120 kg. Use MODE to go to the next step.
Speed
Km flashes. You can change Km to Mi with the Up arrow or Down arrow. Use MODE to go to the
next step.
Energy
Kcalflashes.YoucanchangeKcaltokJoulewiththeUp arrow or Down arrow. Use MODE to go
to the next step.
Settings before you begin


Product specificaties

Merk: Tacx
Categorie: Hometrainer
Model: Flow computer

Heb je hulp nodig?

Als je hulp nodig hebt met Tacx Flow computer stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hometrainer Tacx

Handleiding Hometrainer

Nieuwste handleidingen voor Hometrainer