Synology RS3618xs Handleiding

Synology Server RS3618xs

Lees hieronder de 📖 handleiding in het Nederlandse voor Synology RS3618xs (23 pagina's) in de categorie Server. Deze handleiding was nuttig voor 87 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/23

Synology RackStation RS3618xs

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents 3

Synology RackStation at a Glance 4

Safety Instructions 5

Chapter 2: Hardware Setup

Tools and Parts for Drive Installation 6

Install Drives 6

Add a RAM Module on RackStation 8

Add a Network Interface Card to RackStation 11

Replace System Fan 12

Start Up Your RackStation 14

Chapter 3: Install DSM on RackStation

Install DSM with Web Assistant 15

Learn More 15

Appedix A: Specications

Appedix B: LED Indicator Table

Synology_HIG_RS3618xs_20171129

Thank you for purchasing this Synology product! Before setting up your new RackStation, please check the

package contents to verify that you have received the items below. Also, make sure to read the safety instructions

carefully to avoid harming yourself or damaging your RackStation.

Note: All images below are for illustrative purposes only, and may dier from the actual product.

Package Contents

Main unit x 1 AC power cord x 1

Screws for 2.5” drives x 52

Screws for 3.5” drives x 52

Before You Start

Chapter

3 3

4 Chapter 1: Before You Start

Synology RackStation at a Glance

No. Article Name Location Description

1 Power Button and

Indicator

Front Panel

1. Press to power on the RackStation.

2. To power o the RackStation, press and hold until you hear a beep

sound and the Power LED starts blinking.

2 Status Indicator Displays the status of the system. For more information, see "Appendix B:

LED Indicator Table".

3 Alert Indicator Displays warnings regarding fan or temperature. For more information,

see "Appendix B: LED Indicator Table".

4 Beep O Button Press to deactivate the beeping sound that is emitted when a malfunction

occurs.

5 Drive Status Indicator Displays the status of drives. For more information, see "Appendix B:

LED Indicator Table".

6 Drive Tray Install drives (hard disk drives or solid state drives) here.

7 Rail Kit Release Tab Push in and hold to release the RackStation from the rail kit lock.

8 Power Port

Back Panel

Connect power cord here to supply power to your RackStation.

9 Power Supply On/O

Switch Press to turn on/o the power supply.

10 PSU Fan Disposes of excess heat and cools the PSU.

11 Console Port This port is used for manufacturing use only.

12 LAN Port Connect RJ-45 network cables here.

13 USB 3.0 Port Connect external drives, or other USB devices to the RackStation here.

14 Expansion Port Connect Synology Expansion Units

2 to your Synology RackStation.

15 PCI Express Expansion

Slot Supports two PCIe p4-x8 add-on network interface cards.

16 RESET Button

1. Press and hold until you hear a beep sound to restore the default IP

address, DNS server, and password for the

admin account.

2. Press and hold until you hear a beep sound, then press and hold

again until you hear three beep sounds to return the RackStation

to "Not Installed" status so that DiskStation Manager (DSM) can be

reinstalled.

1 For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.

2 For more information about Synology Expansion Unit supported by your RackStation, please visit www.synology.com.

5 Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not

experience abrupt changes in temperature or humidity.

Place the product right side up at all times.

Do not place near any liquids.

Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or

aerosol cleaners.

To prevent the unit from falling over, do not place on carts or any unstable surfaces.

The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is

correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected from

the power source.

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.

Tools and Parts for Drive Installation

• A screwdriver

• At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models.)

Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please

back up any important data before installation.

Install Drives

1 Open the drive tray.

a Find the small button located on the left side of the drive tray handle. Press the button down, and the drive

tray handle will pop out.

b Pull the drive tray handle out as illustrated above.

2 Install drives:

• For 3.5” drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four

spots indicated below to secure the drive.

• For 2.5” drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four

spots indicated below to secure the drive.

Hardware Setup

Chapter

8 Chapter 2: Hardware Setup

Add a RAM Module on RackStation

The optional Synology RAM module is designed for RackStation memory expansion. Follow the steps below to

install, check, or remove a RAM module on your RackStation.

To install a RAM module:

1 Shut down your RackStation. Disconnect all cables connected to your RackStation to prevent any possible

damage.

2 Remove the rear top cover:

a Remove the screw on the back of RackStation.

b Pull the rear top cover, and put it aside.

Note: When you remove the rear top cover, you expose sensitive internal components. Avoid touching anything other

than the memory assembly when you remove or add memory.

9 Chapter 2: Hardware Setup

3 Insert the new memory module in the slot:

a Push the retaining clips on the slot out to the sides.

b Align the notch on the gold edge of the module with the notch in the memory slot.

c Push down on the memory module with rm and even pressure. The retaining clips will snap into position as

the module is correctly inserted.

Important: For normal operations, you must insert your memory modules into the white slots rst.

Note: Hold the memory module by its edges, and do not touch the gold connectors.

4 Put back the rear top cover you lifted in step 2.

a Align the round dots at the side of rear top cover with the slots on the chassis’ edge, and push the rear top

cover back in position.

b Put back and fasten the screw you removed in step 2-a.

To make sure RackStation recognizes the new memory capacity:

1 Log in to DSM as admin or a user belonging to the

administrators group.

2 Check Total Physical Memory in Control Panel > Info Center.

If your RackStation does not recognize the memory or does not start up successfully, conrm that the memory is

installed correctly.

To remove the RAM Module:

1 Follow step 1 and 2 of the “To install the RAM module” section to shut down your RackStation, disconnect the

cables, and then remove the rear top cover.

2 Disengage the memory retaining clips by pushing them outwards, and the module will pop out of the slot.

3 Follow step 4 of the “To install the RAM module” section to put back the top cover.

10 Chapter 2: Hardware Setup

Attach Network Interface Cards to the RackStation

Your RackStation supports two PCIe p10-x8 add-on network interface cards.

1 You need to replace the long bracket

(suited for PC) in your network interface card with the short bracket before installing the card on your RackStation.

To install the network interface card:

1 Shut down your RackStation. Disconnect all cables connected to your RackStation to prevent any possible

damages.

2 Open the RackStation by following step 2 of

Add a RAM Module on RackStation.

3 Install the network interface card.

a Remove the screw that secures the expansion slot’s cover.

b Lift the expansion slot’s cover.

c Align the card’s connector with the expansion slot, and insert the card into the slot.

Note: Make sure the connector is fully inserted. Otherwise, the network interface card might not be able to

function properly.

d Put back and fasten the screw that you removed in step 3-a so as to secure the newly inserted card.

4 Repeat step 3 to install the other network interface card for your RackStation.

5 Put back the rear top cover by following step 4 of

Add a RAM Module on RackStation.

1 For more information about supported 10GbE/40GbE network interface cards, visit

www.synology.com.

11 Chapter 2: Hardware Setup

Replace System Fan

If a system fan malfunctions, please see the instructions below to open the RackStation and replace the

malfunctioning fan.

1 Press the small buttons located on the sides of the RackStation.

2 Lift to remove the fan cover.

3 Fans are numbered as shown below:

4 Find the malfunctioning fan. Lift the fan upward to remove it.

12 Chapter 2: Hardware Setup

5 Prepare a new fan, and slide it into the RackStation. Make sure the fan is aligned properly as illustrated below.

6 Put back the fan cover you removed in step 2.

Product specificaties

Merk:	Synology
Categorie:	Server
Model:	RS3618xs
Kleur van het product:	Zwart
Gewicht:	14500 g
Breedte:	430.5 mm
Diepte:	692 mm
Hoogte:	88 mm
Geluidsniveau:	50.2 dB
Soort:	NAS
LED-indicatoren:	HDD, Power
Aan/uitschakelaar:	Ja
Frequentie van processor:	2.4 GHz
Processorfamilie:	Intel® Xeon® D
Processormodel:	D-1521
Aantal processorkernen:	4
Inclusief besturingssysteem:	DiskStation Manager
USB-poort:	Ja
Ethernet LAN:	Ja
Meegeleverde kabels:	AC
Processor lithografie:	14 nm
Aantal Ethernet LAN (RJ-45)-poorten:	4
Certificering:	EAC, VCCI, CCC, RCM, FCC, CE, BSMI
Intern geheugen:	8 GB
Intern geheugentype:	DDR4
Duurzaamheidscertificaten:	RoHS
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Ondersteunde beveiligingsalgoritmen:	HTTPS, SSH, SSL/TLS
Ondersteunt Windows:	Windows 10, Windows 7
Aantal gebruikers:	16000 gebruiker(s)
Temperatuur bij opslag:	-20 - 60 °C
Aantal ventilatoren:	4 ventilator(en)
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Processor socket:	BGA 1667
Stepping:	V2
Systeembus:	- GT/s
Processor aantal threads:	8
PCI Express slots versie:	2.0, 3.0
Processor operating modes:	64-bit
Processor cache:	6 MB
PCI Express configuraties:	1x16, 1x4, 1x8
Thermal Design Power (TDP):	45 W
Codenaam processor:	Broadwell
Maximaal aantal PCI Express-lijnen:	32
ECC ondersteund door processor:	Ja
Processorfabrikant:	Intel
Intel® Hyper Threading Technology (Intel® HT Technology):	Ja
Intel® Turbo Boost Technology:	2.0
Intel® AES New Instructions (Intel® AES-NI):	Ja
Enhanced Intel SpeedStep Technology:	Ja
Execute Disable Bit:	Ja
Idle States:	Ja
Thermal Monitoring Technologies:	Ja
CPU configuratie (max):	1
Intel® Enhanced Halt State:	Ja
Intel® VT-x with Extended Page Tables (EPT):	Ja
Ingebouwde opties beschikbaar:	Nee
Intel® Secure Key:	Ja
Intel® 64:	Ja
Intel® OS Guard:	Ja
Intel® Virtualization Technology for Directed I/O (VT-d):	Ja
Intel® Virtualization Technology (VT-x):	Ja
Verpakkingsgrootte processor:	37.5 x 37.5 mm
Conflictvrije processor:	Ja
Versie Intel® Secure Key Technology:	1.00
ARK ID processor:	91202
Intel® Trusted Execution Technology:	Ja
Intel® TSX-NI:	Ja
Versie Intel® TSX-NI:	1.00
Ondersteunde netwerkprotocollen:	CIFS, AFP, NFS, FTP, WebDAV, CalDAV, iSCSI, Telnet, SSH, SNMP, VPN (PPTP, OpenVPN)
Web-gebaseerd management:	Ja
Ondersteunt Mac-besturingssysteem:	Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra
Mac-compatibiliteit:	Ja
Reset button:	Ja
Maximale turbofrequentie van processor:	2.7 GHz
Processorcode:	SR2DF
Type behuizing:	Rack (2U)
Aantal voedingen:	1
Capaciteit voedingsunit (PSU):	500 W
Opslagdrives geïnstalleerd:	Nee
Geïnstalleerde opslag-drive:	Nee
Capaciteit opslag-drive:	0 GB
Totale geïnstalleerde opslagcapaciteit:	0 TB
Maximaal ondersteunde opslagcapaciteit:	144 TB
Snelle installatiehandleiding:	Ja
Maximaal intern geheugen ondersteund door processor:	128 GB
Geheugentypen ondersteund door processor:	DDR3-SDRAM, DDR4-SDRAM
Kloksnelheid geheugen:	2133 MHz
Geheugenslots:	4
Schaalbaarheid:	1S
Hoogte, in bedrijf:	0 - 5000 m
Access Control List (ACL):	Ja
UART:	Ja
Geheugenkanalen ondersteund door processor:	Dual
Ondersteunde browser:	Chrome, Firefox, Internet Explorer 10, Safari
Ondersteunde server operating systems:	Windows Server 2012, Windows Server 2012 R2
Processorserie:	Intel Xeon D-1500
Type koeling:	Actief
RAID support:	Ja
Opslag schijfgrootte:	- "
Apparaatklasse:	Kleine & middelgrote bedrijven
Verbindingsaggregatie:	Ja
Ondersteunde opslagstationinterfaces:	Serial ATA, Serial ATA II, Serial ATA III
Soorten RAID:	0, 1,5, 6,10, F1, JBOD
PCI Express x8 (Gen 3.x) slots:	2
Wake-on-LAN:	Ja
Aantal storage drives ondersteund:	12
Opslagschijf afmetingen ondersteund:	2.5, 3.5 "
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	142.76 W
Bedrijfstemperatuur (T-T):	5 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Code geharmoniseerd systeem (HS):	84714100
Hot-swap drive bays:	Ja
Ondersteunt meerdere talen:	Ja
Ventilator diameter:	80 mm
Backup-functie:	Ja
Back-up-eigenschappen:	Cloud, iSCSI LUN
Systeemlog:	Ja
S.M.A.R.T. support:	Ja
Ondersteunde types opslag-drives:	HDD & SSD
Ondersteunde bestandsystemen:	BTRFS, FAT, HFS+, NTFS, ext3, ext4
iSCSI support:	Ja
Elektriciteitsverbruik (HDD-stand-by):	55.05 W
Vermogenstoevoer locatie:	Ingebouwd
Ondersteund maximum RAM:	64 GB
Hot-spare:	Ja
Gedeelde map:	CIFS/AFP/FTP