Sylvania 6432FE Handleiding

Sylvania Televisie 6432FE

Lees hieronder de 📖 handleiding in het Nederlandse voor Sylvania 6432FE (8 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

This TV can receive C1 and C2 Caption and Text.

CAPTION MODE

1) Closed Caption Characters can be displayed on the TV screen only when the received broad-

cast signal contains Caption Signals.

2) Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in memory, they are displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines).

Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters

will not be displayed.

TEXT MODE

1) Displays the text on the screen by scrolling (max. 7 lines).

2) If the received broadcast signal does not contain caption or text signals, no change will occur.

Notes:

1) When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a

VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or

text.

2) Captions and texts may not match the TV voice exactly.

3) Interference may cause the closed caption system not to function properly.

4) The caption or text characters will not be displayed while the menu display or functions dis-

play is shown.

5) If you see this screen:

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode.

To clear screen, select CAPTION C1, C2 or CAPTION [OFF].

ANTENNA/CABLE CONNECTIONS

PRECAUTIONS

●Place your TV in a room with adequate ventilation.

●Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

●Do not place your TV on soft surfaces, such as rugs or blankets.

●Leave enough room for air to circulate around the bottom, top and back of the set.

FEATURES

●AV MEMORY (MANUAL/SPORT/NEWS/MOVIE/GAME)

●Flat Screen Picture Tube

●MTS/SAP Tuner

●181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

●PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-

ing system provides free and easy channel selection and lets you tune directly to any channel

using the channel number buttons (0~9 and +100-key) on the remote control.

●On-Screen Function Display

●Full-Function Remote Control

●Sleep Timer

●Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,

prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

●Auto Shut Off Function- If there is no signal input from the antenna terminal and no user

operation for 15 minutes, the TV will turn itself off automatically.

●V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

●S-VIDEO Input- allows you to get better picture detail and clarity.

●Front / Rear AV Input

●Component VIDEO Input- Provides best signal connection.

●Rear Audio Output- To connect TV sound to a home audio system

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

The serial number of this product may be found on the back of the TV. No others have the same

serial number as yours. You should record the number and other vital information here and retain

this book as a permanent record of your purchase to aid identification in case of theft.

AUDIO OU TPUT

VIDEO 3 IN PT

VIDEO

S -VID EO

AUDIO

ANT. IN

COMPO NEN T VIDEO -INPU T

VIDEO 1 IN PT

CLOSED CAPTION

UHF

Antenna

(Not supplied)

VHF

Antenna

(Not supplied)

VHF/UHF Combiner

(Not supplied)

VHF/UHF

Combination Antenna

(Not supplied)

OR OR

ANT. IN

OUT IN

75-ohm

Coaxial Cable

From Cable System

or Satellite Antenna

75-ohm

Coaxial Cable

CATV Box *

or Satellite Box

(Not supplied)

*Some cable TV systems use scram-

bled signals and require a special

converter to receive these channels.

Consult your local cable company.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-

40 of the NEC that provides guidelines for proper grounding and, in particular, speci-

fies that the cable ground shall be connected to the grounding system of the building

as close to the point of cable entry as practical.

FCC WARNING- This equip-

ment may generate or use radio

frequency energy. Changes or

modifications to this equipment

may cause harmful interference

unless the modifications are

expressly approved in the

instruction manual. The user

could lose the authority to oper-

ate this equipment if an unau-

thorized change or modification

is made.

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE

1-800-968-3429 OR VISIT OUR WEB SITE AT http://www.funai-corp.com

Owner’s

Manual

1EMN20156 Printed in Malaysia

L2931UB * * * *

32 INCH

COLOR TELEVISION

6432FE

CAUTION: TO PREVENT ELECTRIC

SHOCK, MATCH WIDE BLADE OF PLUG

TO WIDE SLOT AND FULLY INSERT.

MISE EN GARDE:

POUR ÉVITER LES CHOCS ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPON-

DANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND.

SYLVANIA

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workman-

ship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from

the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded

from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT

OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE

PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or

if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any

product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does

not cover damage which occurs in shipment, failures which are caused by repairs, alterations or product not supplied

by FUNAI CORP, or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration,

faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage

which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN

THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SER-

VICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO A FUNAI AUTHO-

RIZED SERVICE FACILITY.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.

IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS

COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT

VA RY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO

OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest SYLVANIA Authorized Service Center or general service procedure,

please call 1-800-968-3429 or write to the following:

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Tel :1-800-968-3429

http://www.funai-corp.com

Head Office: 100 North Street, Teterboro, NJ 07608

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-

ANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO

USER SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRE-

SENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING

THE APPLIANCE.

The important note is located on the rear of the cabinet.

1. Read instructions-All the safety and operating instruc-

tions should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instruc-

tions should be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions

should be followed.

5. Cleaning-Unplug TV from the wall outlet before clean-

ing. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupt-

ed service and, that for some specific reason, such as

the possibility of the loss of an authorization code for a

CATV converter, is not intended to be unplugged by

the user for cleaning or any other purpose, may

exclude the reference to unplugging the appliance in

the cleaning description otherwise required in item 5.

6. Attachments-Do not use attachments not recommended

by the TV manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this TV near water, for

example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming

pool, and the like.

8. Accessories-Do not place this TV on an unstable cart,

stand, tripod, bracket, or table. The TV may fall, caus-

ing serious injury to someone, and serious damage to

the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or

sold with the TV.

Any mounting of the appliance should follow the man-

ufacturer’s instructions and should

use a mounting accessory recom-

mended by the manufacturer. An

appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

AMEUBLES- Cet appareil ne doit être placé que sur un

meuble (avec ou sans roulettes) recommandé par le

fabricant. Si vous l’installez sur

un meuble à roulettes, déplacez

les deux ensembles avec précau-

tion. Un arrêt brusque, l’utilisation

d’une force excessive et des sur-

faces irrégulières risquent de

déstabiliser l’ensemble et de le

renverser.

9. Ventilation-Slots and openings in the cabinet and the

back or bottom are provided for ventilation and to

ensure reliable operation of the TV and to protect it

from overheating, these openings must not be blocked

or covered. The openings should never be blocked by

placing the TV on a bed, sofa, rug, or other similar sur-

face. This TV should never be placed near or over a

radiator or heat register. This TV should not be placed

in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufac-

turer’s instructions have been adhered to .

10. Power Sources-This TV should be operated only from

the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local

power company. For TVs intended to operate from bat-

tery power, or other sources, refer to the operating

instructions.

11. Grounding or Polarization-This TV is equipped with a

polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet,

try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

PORTABLE CART WARNING

S3126A

12. Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

appliance.

13. Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV, be sure the anten-

na or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect

to proper grounding of the mast and supporting struc-

ture, grounding of the lead-in wire to an antenna dis-

charge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding elec-

trodes, and requirements for the grounding electrode.

(Fig. A)

14. Lightning-For added protection for this TV receiver

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system.

This will prevent damage to the TV due to lightning

and power-line surges.

15. Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light of power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact

with them might be fatal.

16. Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry-Never push objects of any

kind into this TV through openings as they may touch

dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of

any kind on the TV.

18. Servicing-Do not attempt to service this TV yourself as

opening or removing covers may expose you to dan-

gerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19. Damage Requiring Service-Unplug this TV from the

wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into

the TV.

c. If the TV has been exposed to rain or water.

d. If the TV does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions, as improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified techni-

cian to restore the TV to its normal operation.

e. If the TV has been dropped or damaged in any way.

f. When the TV exhibits a distinct change in perfor-

mance-this indicates a need for service.

20. Replacement Parts-When replacement parts are

required, be sure the service technician uses replace-

ment parts specified by the manufacturer that have the

same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, injury to

persons or other hazards.

21. Safety Check-Upon completion of any service or

repairs to this TV, ask the service technician to perform

routine safety checks to determine that the TV is in

proper operating condition.

22. Heat-This TV product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

E L E C T R I C

SE R V I C E

E Q UI P ME N T

G R O UN D

CLAM P

NE C - NAT IONAL E LECT RICAL CO DE POWE R SE R V ICE G ROUNDI NG

E LE C T RODE SYST E M

(NE C ART 25 0 , PA R T H)

S 2 8 9 8 A

GRO UND CLA MPS

GRO UNDING CO NDUCTO R S

(NE C SE CTION 81 0 -2 1)

A NT E N NA

DI SCHARG E U NIT

(NE C SE CTION 81 0 -2 0)

A NT E N NA

LE A D IN

W IR E

OPERATING CONTROLS AND FUNCTIONS

1. VIDEO (INPUT) jack- Connect to the

video output jack of a video camera, VCR,

or video game.

2. AUDIO L/R (INPUT) jacks- Connect to

the left/right channel audio output jacks of a

video camera, VCR, or video game.

Note: The AUDIO L (INPUT) jack is for

mono input. The sound is heard from both

speakers. Use this jack for connecting

monaural audio equipment.

3. MENU button- Press to display the menu

on the TV screen.

4. VOLUME (VOL) ▲ ▼ / buttons- Press to

control the volume level.

Press to determine the setting mode from the

menu on the TV screen (only the VOL ▲

button).

Press to select or adjust from a particular

menu (for example: Language Selection,

Channel Presetting, Closed Caption Selec-

tion, Picture Adjustment, V-CHIP Set Up).

5. CHANNEL (CH) ▲ ▼ / buttons- Press to

select memorized channel.

Press to select the setting mode from the

menu on the TV screen.

Press to select item you want to adjust in

the picture control mode.

6. POWER button- Press to turn the TV ON

and OFF.

7. Infrared Sensor Window- Receives the

infrared control signals from the remote

control.

8. Channel number buttons- Press two digits

to directly access the desired channel.

Remember to press a “0” before a single

digit channel.

+100 button- Press to select cable channels

higher than 99.

9. MUTE button- Press to turn off the sound

portion of the TV program (Volume level

display turns LIGHT RED from LIGHT

BLUE). Press this button again or press the

VOL(ume) or ▲ ▼ button to restore sound.

10.

INPUT SELECT button- Press to select

TV or the external input (VIDEO1,

VIDEO2, VIDEO3 or COMPONENT) (See

USING AUDIO/VIDEO INPUT JACKS).

11.CH RETURN button- Press to go back to

the previously viewed channel. For exam-

ple, pressing this button once will change

channel display from CH 3 (present chan-

nel) to CH 10 (previously viewed channel)

and pressing it a second time will return

from CH 10 to CH 3.

12.DISPLAY button- Press to display the

channel number on the screen. If you press

it again, the channel number will disappear.

13.SLEEP button- Press to display the sleep

timer and begin the timer. The shut off time

can be set by the number of times you press

the button (0, 10, 20, 30,..90, 0 minutes).

14.AC cord- Connect to a standard AC outlet

(120V/60Hz).

Note: Unwrap the AC cord completely

from the back cover before plugging the

cord into an AC outlet.

15.AUDIO L/R OUTPUT jacks- Connect to

the left/right channel audio input jacks of a

home stereo system.

16.S-VIDEO input jack- Connect to the

S-VIDEO output jack of a video camera,

VCR or video game system using the

S-VIDEO cable (not supplied).

Note: The S-VIDEO jack is given priority

over the VIDEO (Rear) jack.

17.COMPONENT AUDIO input jacks-

Connect to the left/right channel audio out-

put jacks of DVD player when using the

COMPONENT VIDEO INPUT jacks.

18.ANT(enna). IN jack- Connect to an anten-

na, cable system or satellite system.

19. -COMPONENT VIDEO INPUT jacks

Connect to the Component Video output

jacks of DVD player.

Note: This TV can only accept a 480i

(interlaced) video signal.

- REMOTE CONTROL -

VIDEO L - AUDIO - R

MENU VOLUME CHANNEL POWER

4 5 6 7

1 2 3

AUDIO OUT PUT

VIDEO 3 INPUT

VIDEO

S-VIDEO

AUDIO

ANT. IN

COMPONENT VIDEO-INPUT

VIDEO 1 INPUT

181621

14 15 17 19

POWER

INPUT

SELECT DISPLAY SLEEP

MUTE CH RETURN

VOL

1 2 3

4 5 6

7 8 9

+100

INSTALLING THE BATTERIES

1) Remove the battery

compartment cover on the

remote unit by sliding it while

slightly twisting.

2) Insert 2 “AA” penlight

batteries into battery

compartment in the direction

as indicated by the polarity

(+ /

) markings.

3) Replace the cover.

4) Push the cover on it’s top side

until it clicks in order to fit the

cover completely to the

compartment.

USING AUDIO/VIDEO INPUT JACKS

When you use the AUDIO/VIDEO input jacks

or COMPONENT VIDEO INPUT jacks, select

“VIDEO1”, “VIDEO2”, “VIDEO3” or “COM-

PONENT” mode by pressing the INPUT

SELECT button on the remote control.

• To select the VIDEO1 INPUT jacks on the

rear of the TV, select “VIDEO1”.

• To select the jacks on the front of the TV,

select “VIDEO2”.

• To select the VIDEO3 INPUT jacks on the

rear of the TV, select “VIDEO3”.

• To select the COMPONENT VIDEO INPUT

jacks on the rear of the TV, select “COMPO-

NENT”.

Note: When you use the S-VIDEO connec-

tion, S-VIDEO jack is given priority over the

VIDEO jack on the rear panel.

SYMBOLE D'AVERTISSEMENT POUR

LES COMPOSANTES

APPAREIL ET MEUBLE A ROULETTES

S3126A

- FRONT PANEL - - REAR PANEL -

Note:

●In the above steps, the picture adjustment display will disappear from the TV screen automati-

cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume)

▲ ▲ ▼ button so that “PICTURE” is selected. Press the CH(annel) or button repeatedly until

the display returns to the screen.

OPERATIONS

MANUAL NEWSSPORT MOVIE GAME

PICTURE ADJUSTMENT

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

1) Connect the power cord to a standard AC outlet.

Note: If some digits appear in the corner of the screen, press the POWER

button without unplugging the power cord.

2) Press the POWER button to turn on the TV.

3) Press the MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel) ▲ ▼ or button to point to “[ENG]”.

5) Select “ENG(lish)”, “ESP(añol)” or “FRA(nçais)” by using

the VOL(ume) ▲ ▼ or button.

6) Press the MENU button to exit the menu.

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below.

1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears

on the TV screen.

3) Press the CH(annel) button to point to “CHANNEL SET”. ▲ or ▼

Then press the VOL(ume) ▲ button.

4) Press the CH(annel) ▲ ▼ or button to point to “AUTO PRESET CH”.

Then press the VOL(ume) ▲ button.

The tuner scans and memorizes all active channels in your area.

●The TV distinguishes between standard TV channels and cable (CATV)

channels.

●When AUTO PRESET CH action is completed, the lowest memorized

channel reappears on the screen.

●When you press the CH(annel) ▲ ▼ or button after selecting “AUTO

PRESET CH”, the tuner will stop at the memorized channels only.

●The TV may memorize TV channels as CATV channels if the reception conditions are poor. If

this happens, try AUTO PRESET CH action again when reception conditions are better.

●When AUTO PRESET CH is activated where there is no TV signal input, “NO TV SIGNALS”

will appear on the display after the completion of channel scanning.

[ADD/DELETE FUNCTION]

1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel) button to point to “CHANNEL SET”. ▲ or ▼

Then press the VOL(ume) ▲ button.

3) Press the VOL(ume) ▲ button so that “ADD/DELETE” is selected.

4) Use the CH(annel) ▲ ▼ or button to select the channel you wish to put

into memory or to erase from memory.

Note: The menu will disappear automatically in about 10 seconds.

Perform “ADD/DELETE” function while this display appears on the

screen.

●Press the VOL(ume) button to highlight the channel number ▲ or ▼

in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) button to highlight the channel number ▲ or ▼

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

MTS (Multi-Channel Television Sound) SYSTEM

You can listen to a program in MTS stereo by following the steps below.

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-

ly when the power resumes.

Type of

broadcast

Regular -None-

Stereo

broadcast STEREO

SAP

Selection MAIN MONO SAP

-None- -None-

MONO STEREO

SAP

MAIN MAIN

PREPARATION FOR USE

WATCHING A TV PROGRAM

1) Press the POWER button to turn on the TV.

2) Select the desired channel with the CH(annel) ▲ ▼ or button.

3) Adjust the volume to the desired listening level using the VOL(ume) ▲ ▼ or button.

4) Adjust picture controls for a natural looking image (See “PICTURE ADJUSTMENT”).

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the POWER automatically turn

off after a set time period.

1) Press the POWER button to turn on the TV and press the SLEEP button

on the remote control .

2) You may change the sleep time by pressing the SLEEP button on the

remote control repeatedly. The timer can be set up to 90

minutes. 10 minutes each time the SLEEP button is

pressed. (The timer display counts up and sleep timer will

be displayed on the screen when you press the SLEEP

button on remote control).

Note: When you disconnect the unit from the AC outlet or when you have a power failure, the

sleep time will be lost.

CLOSED CAPTION SELECTION

SLEEP 10

To cancel the sleep timer:

Press the SLEEP button repeated-

ly until “SLEEP 0” is displayed.

You may view specially labeled (cc) TV pro-

grams, movies, news and prerecorded tapes,

etc. with either a dialogue caption or text dis-

play added to the program.

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel) button to point▲ or ▼

to “CAPTION”.

3) Press the VOL(ume) button to select▲ or ▼

the mode you wish.

4) When done, press the MENU button to exit

the menu.

: Press the VOL(ume) ▲ ▼ or button.

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

ADD/DELETE

AUTO PRESET CH

ADD/DELETE

AUTO PRESET CH

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

[To Select STEREO, MONO or SAP in Stereo broadcast]

1) Press the MENU button so that the menu display appears on the TV screen.

2) Press the CH(annel) button to point to “TV SOUND”. ▲ or ▼

3) Press the VOL(ume) ▲ ▼ or button to select your desired stereo mode

([MAIN], [MONO] or [SAP]).

AV MEMORY

This feature allows you to quickly adjust picture settings for MANUAL, SPORT, NEWS, MOVIE

and GAME to match the program you are watching.

1) Press the MENU button so that the menu display appears on the TV screen.

2) Press the VOL(ume) ▲ button so that “PICTURE” is selected.

3) Select the item with the CH(annel) ▲ ▼ or button.

Note: See “PICTURE ADJUSTMENT” to manually customize the picture.

To show the status, press the

DISPLAY button on the remote

control.

SAP: Second Audio Program,

which means your program, can

also be received in a second lan-

guage or sometimes a radio station.

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [ C1]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [ C2]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [ T1]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [ T2]

TV SOUND [MAIN]

Type of

broadcast

Regular -None-

Stereo

broadcast STEREO

SAP

Selection MAIN MONO SAP

-None- -None-

MONO STEREO

SAP

MAIN MAIN

Type of

broadcast

Regular -None-

Stereo

broadcast STEREO

SAP

Selection MAIN MONO SAP

-None- -None-

MONO STEREO

SAPMAIN MAIN

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MONO]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [SAP]

: Press the VOL(ume) ▲ ▼ or button.

BRIGHT

CONTRAST

COLOR

TINT

SHARPNESS

to increase

brightness

to increase

contrast

to brilliant

to green

to clear

to decrease

brightness

to decrease

contrast

to pale

to purple

to soft

VOL(ume) VOL(ume)

[-] SHARPNESS [+][-] CONTRAST [+] [-] COLOR [+] [-] TINT [+][-] BRIGHT [+]

1) Press the MENU button so that the menu dis-

play appears on the TV screen.

2) Press the VOL(ume) ▲ button so that

“PICTURE” is selected.

3) Press the CH(annel) button to select▲ or ▼

“MANUAL”. Then press the VOL(ume) ▲

button.

4) Select the feature you wish to adjust with the

CH(annel) or ▲ ▼ button and adjust it with the

VOL(ume) or button.▲ ▼

: Press the CH(annel) ▲ ▼ or button.

Product specificaties

Merk:	Sylvania
Categorie:	Televisie
Model:	6432FE

Heb je hulp nodig?

Als je hulp nodig hebt met Sylvania 6432FE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Televisie Sylvania

Sylvania 6509DD Handleiding

25 Juni 2023

Sylvania 3819LC Handleiding

24 Juni 2023

Sylvania LV448HG Handleiding

22 Juni 2023

Sylvania LRV100 Handleiding

22 Juni 2023

Sylvania 6419TD Handleiding

21 Juni 2023

Sylvania 6419CTA Handleiding

20 Juni 2023

Sylvania 6842PE M Handleiding

20 Juni 2023

Sylvania 6427CTF Handleiding

19 Juni 2023

Sylvania 6727DD Handleiding

18 Juni 2023

Sylvania LC260SS8 Handleiding

17 Juni 2023

Handleiding Televisie

Nieuwste handleidingen voor Televisie

LG 49LT340C Handleiding

22 November 2024

LG 65UT340H Handleiding

22 November 2024

LG OLED77G3PUA Handleiding

22 November 2024

LG 86QNED80AQA Handleiding

22 November 2024

LG 49UH6090 Handleiding

22 November 2024

LG 39LP620H Handleiding

22 November 2024

LG 49UW660H Handleiding

22 November 2024

LG 86UR76006LC Handleiding

22 November 2024

LG 55UR74006LB Handleiding

22 November 2024

Philips 46PFL3218K Handleiding

22 November 2024