Sylvania 6427CTF Handleiding

Sylvania Televisie 6427CTF

Lees hieronder de 📖 handleiding in het Nederlandse voor Sylvania 6427CTF (4 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

OU T

Y/C IN

R L

VIDEO

AUDIO

ANT.IN

This TV can receive C1 and C2 Caption and Text.

Caption Mode

(1) Closed Caption Characters can be displayed on the TV screen only when the received broad-

cast signal contains Caption Signals.

(2) Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in memory, they are displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)

Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters

will not be displayed.

Text Mode

(1) Displays the text on the screen by scrolling (max. 7 lines)

(2) If the received broadcast signal does not contain caption or text signals, no change will occur.

Notes:

(1) When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a

VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or

text.

(2) Captions and texts may not match the TV voice exactly.

(3) Interference may cause the closed caption system not to function properly.

(4) The caption or text characters will not be displayed while the menu display or functions dis-

play is shown.

(5) If you see this screen:

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To

clear screen, select CAPTION C1, C2 or CAPTION [OFF].

ANTENNA/CABLE CONNECTIONS

PRECAUTIONS

●Place your TV in a room with adequate ventilation.

●Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

●Do not place your TV on soft surfaces, such as rugs or blankets.

●Leave enough room for air to circulate around the bottom, top and back of the set.

FEATURES

●Flat Screen Tube and Comb Filter

●MTS/SAP Tuner

●181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

●PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-

ing system provides free and easy channel selection, and lets you tune directly to any channel

using the channel number buttons (0~9 and +100-key) on the remote control.

●On-Screen Function Display.

●Full-Function Remote Control

●Sleep Timer

●Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,

prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

●Auto Shut Off Function- If there is no air signal input from the antenna terminal and no

user operation for 15 minutes, the TV will turn itself off automatically.

●V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

●S-VIDEO Input- allows you to get better picture detail and clarity for the playback of S-VHS

VCR tapes or Video Discs.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

The serial number of this product may be found on the back of the TV. No others have the same

serial number as yours. You should record the number and other vital information here and retain

this book as a permanent record of your purchase to aid identification in case of theft.

VHF

Antenna

(Not supplied)

OUT IN

75-ohm

Coaxial Cable

From Cable System

or Satellite Antenna

75-ohm

Coaxial Cable

CATV Box *

or Satellite Box

(Not supplied)

*Some cable TV systems use scrambled

signals and require a special converter

to receive these channels. Consult your

local cable company.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of

the NEC that provides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building as close to the point

of cable entry as practical.

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE

1-800-287-4871.

Owner’s

Manual

0EMN01976 Printed in Malaysia

L1524CE * * * * *

This Owner’s Manual is made of recycled paper.

27 INCH COLOR TELEVISION

6427CTF

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

NOTE: CHANNEL SET UP MUST BE COMPLETED BEFORE THE SET WILL

FUNCTION PROPERLY. SEE INSIDE FOR PROCEDURE.

DEGAUSSING :

Magnetism from nearby appliances might affect the

color of the TV picture.

If this happens, move this unit away from the appliance.

If the color is still not correct, press the POWER button

on the set or the remote control to turn off the power

first and then press this button again 30 minutes or so

later to turn on the power.

CLOSED CAPTION

UHF

Antenna

(Not supplied)

VHF/UHF Combiner

(Not supplied)

VHF/UHF

Combination Antenna

(Not supplied)

OR OR

ANT. IN

AV input/output (stereo)

SYLVANIA HOME ENTERTAINMENT WARRANTY

We appreciate your purchase of a SYLVANIA Home Entertainment product. We take pride in the quality of our products

and have manufactured your new Home Entertainment unit to exacting quality standards. We feel confident that in normal

use, it will provide you with satisfactory performance. However, should you experience difficulty, you are protected under

the provisions of this warranty.

SYLVANIA Home Entertainment products are warranted against manufacturing defects in materials and workmanship in

normal use for the following periods from the date of purchase by the original user, and is conditional upon the unit being

installed and used as directed in the instruction manual.

Product Labour Parts Picture Tube

Colour Televisions 1 Year 1 Year 3 Years

Remote Control 90 Days 90 Days —

B/W Televisions 90 Days 1 Year 1 Year

SYLVANIA’s obligation under this warranty shall be limited to the repair, including all necessary parts and the cost of the

labour connected therewith, or at our option the exchange of any Home Entertainment product which shows evidence of a

manufacturing defect within the warranty period.

Replacement parts, furnished in connection with this warranty shall be warranted for a period equal to the unexpired portion

of the original equipment warranty.

CUSTOMER OBLIGATIONS

This warranty applies to the product from the original date of purchase at retail. Therefore, the owner must provide a copy of

the original, dated bill of sale. No warranty service will be performed without a bill of sale. Transportation to and from the

service depot is the responsibility of the owner.

WARRANTY EXCLUSIONS

This warranty is extended to SYLVANIA Home Entertainment products purchased and used in Canada. This warranty shall

not apply to appearance or accessory items including but not limited to: antenna, cabinet, cabinet parts, knobs, batteries,

connecting cables. This warranty shall, in addition, not apply to damages due to handling, transportation, unpacking, set-up,

installation, customer adjustments that are covered in the instruction book, repair or replacement of parts supplied by other

than the SYLVANIA authorized service depot, any malfunction or failure caused by or resulting from abnormal

environmental conditions, improper unauthorized service, improper maintenance, modifications or repair by the consumer,

abuse, misuse, neglect, accident, fire, flood, or other Acts of God, and incorrect line voltage. This Home Entertainment

product is only warranted to the original retail purchaser. This warranty becomes void in the event of commercial or rental

use. This warranty becomes void in the event serial numbers are altered, defaced or removed. SYLVANIA reserves the right

to make changes in design or to make additions to or improvements upon this product without incurring any obligation to

install the same on products previously manufactured. The foregoing is in lieu of all other warranties expressed or implied

and SYLVANIA neither assumes nor authorizes any person to assume for it any other obligation or liability in connection

with the sale or service of this product. In no event shall SYLVANIA or its SYLVANIA dealers be liable for special or

consequential damage arising from the use of this product, or for any delay in the performance of this warranty due to cause

beyond our control.

The purchaser may have other rights under existing provincial or federal laws, and where any terms of this warranty are

prohibited by such laws, they are deemed null and void, but the remainder of the warranty shall remain in effect.

HOW TO OBTAIN SERVICE

Should this product require service, you may obtain specific information on how to obtain service by contacting the

SYLVANIA Dealer from whom this product was purchased, or by contacting us directly:

SONIGEM SERVICE

300 Alden Road

Markham, Ontario

L3R 4C1

PHONE: (905) 940-5089 FAX: (905) 940-2303

1-800-287-4871

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-

ANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO

USER SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRE-

SENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING

THE APPLIANCE.

The important note is located on the rear of the cabinet.

1. Read instructions-All the safety and operating instruc-

tions should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instruc-

tions should be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions

should be followed.

5. Cleaning-Unplug TV from the wall outlet before clean-

ing. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupt-

ed service and, that for some specific reason, such as

the possibility of the loss of an authorization code for a

CATV converter, is not intended to be unplugged by

the user for cleaning or any other purpose, may

exclude the reference to unplugging the appliance in

the cleaning description otherwise required in item 5.

6. Attachments-Do not use attachments not recommended

by the TV manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this TV near water, for

example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming

pool, and the like.

8. Accessories-Do not place this TV on an unstable cart,

stand, tripod, bracket, or table. The TV may fall, caus-

ing serious injury to someone, and serious damage to

the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by

the manufacturer, or sold with the

TV.

Any mounting of the appliance

should follow the manufacturer’s

instructions and should use a

mounting accessory recommended

by the manufacturer. An appliance and cart combina-

tion should be moved with care. Quick stops, excessive

force, and uneven surfaces may cause the appliance

and cart combination to overturn.

9. Ventilation-Slots and openings in the cabinet and the

back or bottom are provided for ventilation and to

ensure reliable operation of the TV and to protect it

from overheating, these openings must not be blocked

or covered. The openings should never be blocked by

placing the TV on a bed, sofa, rug, or other similar sur-

face. This TV should never be placed near or over a

radiator or heat register. This TV should not be placed

in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufac-

turer’s instructions have been adhered to .

10. Power Sources-This TV should be operated only from

the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local

power company. For TVs intended to operate from bat-

tery power, or other sources, refer to the operating

instructions.

11. Grounding or Polarization-This TV is equipped with a

polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet,

try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

12. Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

appliance.

PORTABLE CART WARNING

S3126A

13. Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV, be sure the anten-

na or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect

to proper grounding of the mast and supporting struc-

ture, grounding of the lead-in wire to an antenna dis-

charge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding elec-

trodes, and requirements for the grounding electrode.

(Fig. A)

14. Lightning-For added protection for this TV receiver

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system.

This will prevent damage to the TV due to lightning

and power-line surges.

15. Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light of power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact

with them might be fatal.

16. Overloading-Do not overload wall outlets and exten-

sion cords as this can result in a risk of fire or electric

shock.

17. Object and Liquid Entry-Never push objects of any

kind into this TV through openings as they may touch

dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of

any kind on the TV.

18. Servicing-Do not attempt to service this TV yourself as

opening or removing covers may expose you to dan-

gerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19. Damage Requiring Service-Unplug this TV from the

wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into

the TV.

c. If the TV has been exposed to rain or water.

d. If the TV does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions, as improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified techni-

cian to restore the TV to its normal operation.

e. If the TV has been dropped or damaged in any way.

f. When the TV exhibits a distinct change in perfor-

mance-this indicates a need for service.

20. Replacement Parts-When replacement parts are

required, be sure the service technician uses replace-

ment parts specified by the manufacturer that have the

same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, injury to

persons or other hazards.

21. Safety Check-Upon completion of any service or

repairs to this TV, ask the service technician to perform

routine safety checks to determine that the TV is in

proper operating condition.

22. Heat-This TV product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

E LE CT R I C

SE RVI CE

EQU IP ME NT

GRO UND

CLAMP

NE C - NAT I ON AL E LE CT R ICAL COD E POWER SERV ICE GRO UND IN G

ELECT R OD E SYST E M

(NEC ART 25 0 , PA R T H)

S 2 8 9 8 A

GRO UND CLA MPS

GRO UND ING COND UCT ORS

(NEC SE CT I ON 8 1 0-2 1 )

A NT E NN A

DISCHA R GE U NIT

(NEC SE CT I ON 8 1 0-2 0 )

A NT E NN A

LE AD IN

WIR E

OPERATING CONTROLS AND FUNCTIONS

- REAR PANEL -

1. VIDEO (in) jack- Connect to the video

output jack of a video camera or VCR.

2. AUDIO L/R IN jacks- Connect to the

left/right channel audio output jacks of a

video camera or VCR.

NOTE: The AUDIO L (IN) jack is for

mono input. The sound is heard from both

speakers. Use this jack for monaural audio

equipment to be hooked up.

3. HEADPHONE jack- To connect earphone

(not supplied) for personal listening.

4. MENU button- Press to display the menu

on the TV screen.

5. V /OLUME ▲ ▼ buttons- Press to control

the volume level.

Press to determine the setting mode from the

menu on the TV screen. (only the VOL ▲

button)

Press to select or adjust from a particular

menu. (for example: Language Selection,

Channel Presetting, Closed Caption Selection,

Picture Adjustment, V-CHIP Set Up)

6. CHANNEL ▲ ▼ / buttons- Press to select

memorized channel.

NOTE:You MUST PRESET channels

BEFORE using CHANNEL ▲ ▼ / button.

(See CHANNEL PRESETTING.)

Press to select the setting mode from the

menu on the TV screen.

Press to select item you want to adjust in

the picture control mode.

7. POWER button- Press to turn the TV ON

and OFF.

8. Infrared Sensor Window- Receives the

infrared control signals from the remote

control unit.

9. CHANNEL NUMBER button- Press two

digits to directly access the desired channel.

Remember to press a "0" before a single

digit channel.

+100 button- Press to select cable channels

higher than 99.

10.MUTE button- Press the MUTE button to

turn off the sound portion of the TV pro-

gram. (Volume level display turns LIGHT

RED from LIGHT BLUE.) Press the

MUTE button again or press the VOL(ume)

▲ ▼ or button to restore sound.

11.INPUT SELECT button- Press to select

TV or the external input (VIDEO1 or

VIDEO2) mode.

(See USING AUDIO/VIDEO INPUT JACKS.)

12.CHANNEL RETURN button- Press this

button to go back to the previously viewed

channel. For example, pressing the CHAN-

NEL RETURN button once will change

channel display from CH 3 (present chan-

nel) to CH 10 (previously viewed channel),

and pressing it a second time will return

from CH 10 to CH 3.

13.DISPLAY button- Press to display the

channel number on the screen. If you press

it again, the channel number will disappear.

14.SLEEP button- Press the SLEEP button to

display the sleep timer and start the func-

tion. The shut off time can be determined

by the number of times you press the but-

ton. (0, 10, 20, 30,..90, 0 minutes)

15.GAME button- Press to set the Game

mode and external input mode at the same

time. To exit, press the INPUT SELECT

button.

(See USING AUDIO/VIDEO INPUT JACKS

and PICTURE ADJUSTMENT.)

16.S-VIDEO input jack- Connect to the S-

VIDEO output jack of a video camera or

VCR using the S-VIDEO cable (not sup-

plied).

NOTE: The S-VIDEO jack on the rear

panel is given priority over the VIDEO

jack.

17.ANT(enna). IN jack- Connect to an anten-

na, cable system, or satellite system.

18.AC cord- Connect to a standard AC outlet

(120V/60Hz).

NOTE: Unwrap the AC cord completely

from the backcover before plugging the

cord into an AC outlet.

- REMOTE CONTROL -

VIDEO

VIDEO 2

MENU VOLUME

L AUDIO R CHANNEL POWER

1 2 4 5 6 7 8

HEADPHONE

OUT

IN S-VIDEO

R L

VIDEO

AUDIO ANT.IN

18 1 16219 17

POWER

1 2 3

4 5 6

7 8 9

0 +100

DISPLAY

VOL

SLEEP

CHANNEL

RETURN

INPUT

SELECT

MUTE

GAME

19.AUDIO L/R OUT jacks- Connect to the

left/right channel audio input jacks of a

video camera or VCR.

INSTALLING THE BATTERIES

1) Slide the battery compartment cover back

on the remote unit.

2) Insert 2 "AA" penlight batteries into battery

compartment in the direction as indicated

by the polarity (+ / -) markings. Batteries

installed with incorrect polarity may dam-

age the remote unit.

3) Replace the cover.

USING AUDIO/VIDEO INPUT JACKS

When you use the AUDIO/VIDEO input jacks,

select “VIDEO1” or “VIDEO2” mode by

pressing the INPUT SELECT button on the

remote control.

• To use the jacks on the back of the TV, select

“VIDEO1”.

• To use the jacks on the front of the TV, select

“VIDEO2”.

NOTES:

• You may also set the Game mode and exter-

nal input mode at the same time by pressing

the GAME button on the remote control.

"GAME" appears on the TV screen. In this

case, connect the external source to the

AUDIO/VIDEO jacks on the front panel.

(See PICTURE ADJUSTMENT.)

• When you use the S-VIDEO connection,

S-VIDEO jack on the rear panel is given pri-

ority over the VIDEO jack.

- FRONT PANEL -

PREPARATION FOR USE

OPERATIONS

WATCHING A TV PROGRAM

1) Press the POWER button to turn on the TV.

2) Select the desired channel with the CH(annel) ▲ or button.▼

3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or button.▼

4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing the POWER button

after a desired time period.

1) Press the POWER button to turn on the TV and press the SLEEP button

on the remote control .

2) You may change the sleep time by pressing the SLEEP

button on the remote control repeatedly. The timer can be set up

to 90 minutes, 10 minutes each time the SLEEP button is

pushed. (The timer display counts up and sleep timer will

be displayed on the screen when you press the SLEEP

button on remote control.)

Note: When you disconnect the unit from the AC outlet,

or if you have a power failure, the sleep time will be lost.

CLOSED CAPTION SELECTION

SLEEP 10

To cancel the sleep timer:

Press the SLEEP button repeated-

ly until "SLEEP 0" is displayed.

You may view specially labeled (cc) TV pro-

grams, movies, news, prerecorded tapes, etc.

with either a dialogue caption or text display

added to the program.

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel) button to point▲ or ▼

to "CAPTION".

3) Press the VOL(ume) button to select▲ or ▼

the mode you wish.

4) When done, press the MENU button to exit

the menu.

PICTURE

CHANNEL SET

[ENGLISH]FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

PICTURE

CHANNEL SET

[ENGLISH]FRANÇAIS

V-CHIP SET UP

CAPTION [ C1]

PICTURE

CHANNEL SET

[ENGLISH]FRANÇAIS

V-CHIP SET UP

CAPTION [ C2]

PICTURE

CHANNEL SET

[ENGLISH]FRANÇAIS

V-CHIP SET UP

CAPTION [ T1]

PICTURE

CHANNEL SET

[ENGLISH]FRANÇAIS

V-CHIP SET UP

CAPTION [ T2]

: Press the VOL(ume) ▲ ▼ or button.

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce-

dure below.

1) Connect the power cord to a standard AC outlet.

Note: If some digits appear in the corner of the screen,

press the POWER button without unplugging the power cord.

2) Press the POWER button to turn on the TV.

3) Press the MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel) button to point to "[ENGLISH]".▲ or ▼

5) Select "ENGLISH" or "FRANÇAIS" = French by using

the VOL(ume) ▲ or button.▼

6) Press the MENU button to exit the menu.

CHANNEL PRESETTING

NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲ or button.▼

To preset a channel or to change a preset channel, follow the procedure below.

1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears

on the TV screen.

3) Press the CH(annel) button to point to "CHANNEL SET". ▲ or ▼

Then, press the VOL(ume) ▲ button.

4) Press the CH(annel) button to point to "AUTO MEMO". ▲ or ▼

Then, press the VOL(ume) ▲ button.

The tuner scans and memorizes all active channels in your area.

●The TV distinguishes between standard TV channels and cable (CATV)

channels.

●When AUTO MEMO action is completed, the lowest memorized channel

reappears on the screen.

●When you press the CH(annel) ▲ ▼ or button after selecting AUTO

MEMO,

the tuner will stop at the memorized channels only.

●The TV may detect TV channels as CATV channels if the receiving conditions are poor. In this

case, try AUTO MEMO action again when receiving conditions are better.

[ADD/DELETE FUNCTION]

1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel) button to point to "CHANNEL SET". ▲ or ▼

Then, press the VOL(ume) ▲ button.

3) Press the VOL(ume) button so that "ADD/DELETE" is selected.▲

4) Use the CH(annel) button to select the channel you wish to put into memory or to erase▲ or ▼

from memory.

Note: The display will return to a normal screen in about 10 seconds.

Perform "ADD/DELETE" function while this display appears on the

screen.

●Press the VOL(ume) ▲ ▼ or button to light up the channel number

in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ ▼ or button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

PICTURE

CHANNEL SET

[ENGLISH]FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

ADD/DELETE

AUTO MEMO

STEREO [ON]

MAIN/SAP [MAIN]

ADD/DELETE

AUTO MEMO

STEREO [ON]

MAIN/SAP [MAIN]

PICTURE

CHANNEL SET

[ENGLISH]FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

PICTURE

CHANNEL SET

[ENGLISH]FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

PICTURE

CHANNEL SET

[ENGLISH]FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

MTS (Multi-Channel Television Sound) System

You can listen to a program in MTS stereo by following the steps below.

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-

ly when the power resumes.

[To Select STEREO or MONO in Stereo broadcast]

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel) button to point▲ or ▼

to "CHANNEL SET".

Then, press the VOL(ume) ▲ button.

3) Press the CH(annel) button so that▲ or ▼

"STEREO" is selected.

4) Press the VOL(ume) ▲ or

▼ button to select the

stereo mode on or off.

Stereo sound is effective

when the "STEREO" is on.

[To Select MAIN or SAP in Bilingual broadcast]

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel) button to point▲ or ▼

to "CHANNEL SET".

Then, press the VOL(ume) ▲ button.

3) Press the CH(annel) button so that▲ or ▼

"MAIN/SAP" is selected.

4) Press the VOL(ume) ▲ or

▼ button to select the

"MAIN” or “SAP".

Bilingual sound is effective

when the "SAP" is selected.

ADD/DELETE

AUTO MEMO

STEREO [ON]

MAIN/SAP [MAIN]

ADD/DELETE

AUTO MEMO

STEREO [ON]

MAIN/SAP [SAP]

Type of broadcast

Regular

(monaural audio)

Stereo broadcast

SAP

Display on

the TV screen

–None–

STEREO

MONO

MAIN

SAP

SELECTION

–Invalid–

STEREO [ON]

STEREO [OFF]

MAIN/SAP [MAIN]

MAIN/SAP [SAP]

To show the status, press the DISPLAY

button on the remote control.

SAP: Second Audio Program, which

means your program, can also be

received in a second language or

sometimes a radio station.

GAME MODE

Set to the most suitable position for TV

GAME.

[+] : ON

[-] : OFF

BRIGHT

Adjust until the whitest parts of the picture are

as bright as you prefer.

[+] : increase brightness

[-] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+] : increase contrast

[-] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[+] : be brilliant color

[-] : be pale color

TINT

Adjust to obtain natural skin tones.

[+] : greenish tone

[-] : reddish tone

Notes:

● “+” is achieved by pressing the VOL(ume)

button and “-” by pressing the VOL(ume)

button.

●In the above steps, the picture adjustment

display will disappear from the TV screen

automatically after about 10 seconds if you

do not press any buttons. Press the MENU

and VOL(ume) ▲ button so that "PIC-

TURE" is selected. Then, press the

CH(annel) or ▲ ▼ button repeatedly until

the display returns to the screen.

●If you adjust the other Picture control after

you set the Game mode to [ON], the Game

mode is set to [OFF] automatically.

[USING THE GAME BUTTON]

You may also set the Game mode and external

input mode at the same time by pressing the

GAME button on the remote control. "GAME"

appears on the TV screen. In this case, connect

the external source to the AUDIO/VIDEO

jacks on the front panel.

●To exit the Game mode and external input

mode, press the INPUT SELECT button on

the remote control.

●To cancel the Game mode only, adjust the pic-

ture control. In this case, "VIDEO2" instead

of "GAME" appears on the TV screen.

●If you press the GAME button when the TV

is off, the TV turns on and will be in the

Game mode and external input mode auto-

matically.

PICTURE ADJUSTMENT

1) Press the MENU button so that the menu display appears on the TV screen.

2) Press the VOL(ume) button so that "PICTURE" is selected.▲

3) Select the feature you wish to adjust with the CH(annel) button and adjust it with the▲ or ▼

VOL(ume) or button.▲ ▼

[-] GAME MODE [+]

OFF ON

[-] BRIGHT [+] [-] CONTRAST [+] [-] COLOR [+] [-] TINT [+]

: Press the CH(annel) ▲ or button.▼

Product specificaties

Merk:	Sylvania
Categorie:	Televisie
Model:	6427CTF

Heb je hulp nodig?

Als je hulp nodig hebt met Sylvania 6427CTF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Televisie Sylvania

Sylvania 6509DD Handleiding

25 Juni 2023

Sylvania 3819LC Handleiding

24 Juni 2023

Sylvania LV448HG Handleiding

22 Juni 2023

Sylvania LRV100 Handleiding

22 Juni 2023

Sylvania 6419TD Handleiding

21 Juni 2023

Sylvania 6419CTA Handleiding

20 Juni 2023

Sylvania 6842PE M Handleiding

20 Juni 2023

Sylvania 6427CTF Handleiding

19 Juni 2023

Sylvania 6727DD Handleiding

18 Juni 2023

Sylvania LC260SS8 Handleiding

17 Juni 2023

Handleiding Televisie

Nieuwste handleidingen voor Televisie

Panasonic TX-32JS360 Handleiding

21 December 2024

Panasonic TX-65HZ2000 Handleiding

21 December 2024

Peerless-AV XHB554 Handleiding

20 December 2024

TCL 75S551G Handleiding

18 December 2024

Toshiba 24WV2463DB Handleiding

18 December 2024

Sony Bravia K-55S30 Handleiding

18 December 2024

TCL 55S551G Handleiding

18 December 2024

TCL 75QM851G Handleiding

18 December 2024

TCL 65S551G Handleiding

18 December 2024

TCL 65QM751G Handleiding

18 December 2024