Sylvania 6427FD Handleiding

Sylvania Televisie 6427FD

Lees hieronder de 📖 handleiding in het Nederlandse voor Sylvania 6427FD (4 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

This TV can receive C1 and C2 Caption and Text.

Caption Mode

(1) Closed Caption Characters can be displayed on the TV screen only when the received broad-

cast signal contains Caption Signals.

(2) Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in memory, they are displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)

Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters

will not be displayed.

Text Mode

(1) Displays the text on the screen by scrolling (max. 7 lines)

(2) If the received broadcast signal does not contain caption or text signals, no change will occur.

Notes:

(1) When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a

VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or

text.

(2) Captions and texts may not match the TV voice exactly.

(3) Interference may cause the closed caption system not to function properly.

(4) The caption or text characters will not be displayed while the menu display or functions dis-

play is shown.

(5) If you see this screen:

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To

clear screen, select CAPTION C1, C2 or CAPTION [OFF].

ANTENNA/CABLE CONNECTIONS

PRECAUTIONS

●Place your TV in a room with adequate ventilation.

●Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

●Do not place your TV on soft surfaces, such as rugs or blankets.

●Leave enough room for air to circulate around the bottom, top and back of the set.

FEATURES

●MTS/SAP Tuner

●181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

●PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-

ing system provides free and easy channel selection, and lets you tune directly to any channel

using the channel number buttons (0~9 and +100-key) on the remote control.

●On-Screen Function Display.

●Full-Function Remote Control

●Sleep Timer

●Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,

prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

●Auto Shut Off Function- If there is no air signal input from the antenna terminal and no

user operation for 15 minutes, the TV will turn itself off automatically.

●V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

●

S-VIDEO Input- Allows you to get better picture detail and clarity for the playback of S-VHS VCR tapes

or Video Discs.

●Front / Rear AV Input

●Component VIDEO Input

●Rear Audio Output

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

The serial number of this product may be found on the back of the TV. No others have the same

serial number as yours. You should record the number and other vital information here and retain

this book as a permanent record of your purchase to aid identification in case of theft.

CLOSED CAPTION

UHF

Antenna

(Not supplied)

VHF

Antenna

(Not supplied)

VHF/UHF Combiner

(Not supplied)

VHF/UHF

Combination Antenna

(Not supplied)

OR OR

ANT. IN

OUT IN

75-ohm

Coaxial Cable

From Cable System

or Satellite Antenna

75-ohm

Coaxial Cable

CATV Box *

or Satellite Box

(Not supplied)

*Some cable TV systems use scram-

bled signals and require a special con-

verter to receive these channels.

Consult your local cable company.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-

40 of the NEC that provides guidelines for proper grounding and, in particular, speci-

fies that the cable ground shall be connected to the grounding system of the building

as close to the point of cable entry as practical.

FCC WARNING- This equip-

ment may generate or use radio

frequency energy. Changes or

modifications to this equipment

may cause harmful interference

unless the modifications are

expressly approved in the

instruction manual. The user

could lose the authority to oper-

ate this equipment if an unau-

thorized change or modification

is made.

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE

1-800-968-3429, OR VISIT OUR WEB SITE AT http://www.funai-corp.com

Owner’s

Manual

0EMN02197 Printed in Malaysia

L6610UA * * * * *

This Owner’s Manual is made of recycled paper.

27 INCH

COLOR TELEVISION

6427FD

CAUTION: TO PREVENT ELECTRIC

SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

SYLVANIA

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workman-

ship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from

the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded

from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT

OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE

PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or

if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any

the product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does

not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup-

plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter-

ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or

damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-

NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-

TIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY FUNAI AUTHORIZED SER-

VICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED

SERVICE FACILITY.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.

IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS

COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT

VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO

OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest SYLVANIA Authorized Service Center or general service procedure,

please call 1-800-968-3429 or write to the following:

FUNAI CORPORATION

Customer Service

100 North Street; Teterboro, NJ 07608

Tel :1-800-968-3429

http://www.funai-corp.com

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

ATTENTION:

POUR ÉVITER LES CHOC ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE

DE LA FICHE DANS LA BORNE CORRE-

SPONDANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND.

UHF/VHF Rod

Antenna

(Not supplied)

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-

ANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO

USER SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRE-

SENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING

THE APPLIANCE.

The important note is located on the rear of the cabinet.

1. Read instructions-All the safety and operating instruc-

tions should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instruc-

tions should be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions

should be followed.

5. Cleaning-Unplug TV from the wall outlet before clean-

ing. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupt-

ed service and, that for some specific reason, such as

the possibility of the loss of an authorization code for a

CATV converter, is not intended to be unplugged by

the user for cleaning or any other purpose, may

exclude the reference to unplugging the appliance in

the cleaning description otherwise required in item 5.

6. Attachments-Do not use attachments not recommended

by the TV manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this TV near water, for

example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming

pool, and the like.

8. Accessories-Do not place this TV on an unstable cart,

stand, tripod, bracket, or table. The TV may fall, caus-

ing serious injury to someone, and serious damage to

the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or

sold with the TV.

Any mounting of the appliance should follow the man-

ufacturer’s instructions and should

use a mounting accessory recom-

mended by the manufacturer. An

appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

AMEUBLES- Cet appareil ne doit tre plac que sur unê é

meuble (avec ou sans roulettes) recommand par leé

fabricant. Si vous l installez sur’

un meuble roulettes, dà éplacez

les deux ensembles avec précau-

tion. Un arr t brusque, lê ’utilisation

d’une force excessive et des sur-

faces irr res risquent deéguliè

déstabiliser l’ensemble et de le

renverser.

9. Ventilation-Slots and openings in the cabinet and the

back or bottom are provided for ventilation and to

ensure reliable operation of the TV and to protect it

from overheating, these openings must not be blocked

or covered. The openings should never be blocked by

placing the TV on a bed, sofa, rug, or other similar sur-

face. This TV should never be placed near or over a

radiator or heat register. This TV should not be placed

in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufac-

turer’s instructions have been adhered to .

10. Power Sources-This TV should be operated only from

the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local

power company. For TVs intended to operate from bat-

tery power, or other sources, refer to the operating

instructions.

11. Grounding or Polarization-This TV is equipped with a

polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet,

try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

PORTABLE CART WARNING

S3126A

12. Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

appliance.

13. Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV, be sure the anten-

na or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect

to proper grounding of the mast and supporting struc-

ture, grounding of the lead-in wire to an antenna dis-

charge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding elec-

trodes, and requirements for the grounding electrode.

(Fig. A)

14. Lightning-For added protection for this TV receiver

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system.

This will prevent damage to the TV due to lightning

and power-line surges.

15. Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light of power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact

with them might be fatal.

16. Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry-Never push objects of any

kind into this TV through openings as they may touch

dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of

any kind on the TV.

18. Servicing-Do not attempt to service this TV yourself as

opening or removing covers may expose you to dan-

gerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19. Damage Requiring Service-Unplug this TV from the

wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into

the TV.

c. If the TV has been exposed to rain or water.

d. If the TV does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions, as improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified techni-

cian to restore the TV to its normal operation.

e. If the TV has been dropped or damaged in any way.

f. When the TV exhibits a distinct change in perfor-

mance-this indicates a need for service.

20. Replacement Parts-When replacement parts are

required, be sure the service technician uses replace-

ment parts specified by the manufacturer that have the

same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, injury to

persons or other hazards.

21. Safety Check-Upon completion of any service or

repairs to this TV, ask the service technician to perform

routine safety checks to determine that the TV is in

proper operating condition.

22. Heat-This TV product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

E LE CT R I C

SE RVI CE

EQU IP ME NT

GRO UND

CLAMP

NE C - NAT I ON AL E LE CT R ICAL COD E POWER SERV ICE GRO UND IN G

ELECT R OD E SYST E M

(NEC ART 25 0 , PA RT H)

S 2 8 9 8 A

GRO UND CLA MPS

GRO UND ING COND UCT ORS

(NEC SE CT I ON 8 1 0-2 1 )

A NT E NN A

DISCHA R GE U NIT

(NEC SE CT I ON 8 1 0-2 0 )

A NT E NN A

LE AD IN

WIR E

OPERATING CONTROLS AND FUNCTIONS

- REAR PANEL -

1. VIDEO (in) jack- Connect to the video

output jack of a video camera or VCR.

2. AUDIO L/R IN jacks- Connect to the

left/right channel audio output jacks of a

video camera or VCR.

NOTE: The AUDIO L (IN) jack is for

mono input. The sound is heard from both

speakers. Use this jack for monaural audio

equipment to be hooked up.

3. MENU button- Press to display the menu

on the TV screen.

4. VOLUME /▲ ▼ buttons- Press to control

the volume level.

Press to determine the setting mode from the

menu on the TV screen. (only the VOL ▲

button)

Press to select or adjust from a particular

menu. (for example: Language Selection,

Channel Presetting, Closed Caption Selection,

Picture Adjustment, V-CHIP Set Up)

5. CHANNEL /▲ ▼ buttons- Press to select

memorized channel.

NOTE:You MUST PRESET channels

BEFORE using CHANNEL ▲ ▼/ buttons.

(See CHANNEL PRESETTING.)

Press to select the setting mode from the

menu on the TV screen.

Press to select item you want to adjust in

the picture control mode.

6. POWER button- Press to turn the TV ON

and OFF.

7. Infrared Sensor Window- Receives the

infrared control signals from the remote

control unit.

8. CHANNEL NUMBER buttons- Press two

digits to directly access the desired channel.

Remember to press a "0" before a single

digit channel.

+100 button- Press to select cable channels

higher than 99.

9. MUTE button- Press the MUTE button to

turn off the sound portion of the TV pro-

gram. (Volume level display turns LIGHT

RED from LIGHT BLUE.) Press the MUTE

button again or press the VOL(ume) ▲or

▼button to restore sound.

10.INPUT SELECT button- Press to select

TV or the external input (VIDEO1,

VIDEO2, or COMPONENT) mode.

(See USING AUDIO/VIDEO INPUT JACKS.)

11.CHANNEL RETURN button- Press this

button to go back to the previously viewed

channel. For example, pressing the CHAN-

NEL RETURN button once will change

channel display from CH 3 (present chan-

nel) to CH 10 (previously viewed channel),

and pressing it a second time will return

from CH 10 to CH 3.

12.DISPLAY button- Press to display the

channel number on the screen. If you press

it again, the channel number will disappear.

13.SLEEP button- Press the SLEEP button to

display the sleep timer and start the func-

tion. The shut off time can be determined by

the number of times you press the button.

(0, 10, 20, 30,..90, 0 minutes)

14.GAME button- Press to set the Game

mode. To exit, press the INPUT SELECT

button.

(See USING AUDIO/VIDEO INPUT JACKS

and PICTURE ADJUSTMENT.)

15.AC cord- Connect to a standard AC outlet

(120V/60Hz).

NOTE: Unwrap the AC cord completely

from the backcover before plugging the

cord into an AC outlet.

16.AUDIO L/R (out) jacks- Connect to the

audio input of an external amplifier or

decorder.

17.

S-VIDEO input jack- Connect to the S-

VIDEO output jack of a video camera or VCR

using the S-VIDEO cable (not supplied).

NOTE: The S-VIDEO jack on the rear

panel is given priority over the VIDEO

jack.

18.ANT(enna). IN jack- Connect to an anten-

na, cable system, or satellite system.

19. -COMPONENT AUDIO INPUT jacks

Connect to the left/right channel audio out-

put jacks of DVD player when using the

Component Video input jacks.

20. -COMPONENT VIDEO INPUT jacks

Connect to the Component Video output

jacks of DVD player.

- REMOTE CONTROL -

VIDEO

VIDEO 2

MENU VOLUME

L AUDIO R CHANNEL POWER

1 2 3 4 5 6 7

A NT . I N

P b

P r

RA U DI O

O U T P U T

R L

R L VIDEO

V I DE O 1

I NP U T

V I DE O

A U DI O

I NP U T

C O MP O N E N T V IDE O

I NP U T

15 16 2 1 1918 2017

POWER

1 2 3

4 5 6

7 8 9

0 +100

DISPLAY

VOL

SLEEP

CHANNEL

RETURN

MUTE

GAME

INPUT

SELECT

INSTALLING THE BATTERIES

1) Slide the battery compartment cover back

on the remote unit.

2) Insert 2 "AA" penlight batteries into battery

compartment in the direction as indicated

by the polarity (+ / -) markings. Batteries

installed with incorrect polarity may dam-

age the remote unit.

3) Replace the cover.

USING AUDIO/VIDEO INPUT JACKS

When you use the AUDIO/VIDEO input jacks

or COMPONENT VIDEO INPUT jacks, select

“ ” “ ” “ ”VIDEO1 or VIDEO2 or COMPONENT

mode by pressing the INPUT SELECT button

on the remote control.

•To use the VIDEO1 INPUT jacks on the rear

of the TV, select “VIDEO1”.

•To use the jacks on the front of the TV, select

“ ”VIDEO2 .

•To use the Component jacks on the rear of

the TV, select “COMPONENT”.

NOTES:

•You may also set the Game mode by press-

ing the GAME button on the remote control.

"GAME" appears on the TV screen. In this

case, connect the external source to the

AUDIO/VIDEO jacks on the front panel.

(See PICTURE ADJUSTMENT.)

•When you use the S-VIDEO connection,

S-VIDEO jack on the rear panel is given pri-

ority over the VIDEO1 jack.

SYMBOLE D'AVERTISSEMENT POUR

LES COMPOSANTES

APPAREIL ET MEUBLE A ROULETTES

S3126A

- FRONT PANEL -

PICTURE ADJUSTMENT

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce-

dure below.

1) Connect the power cord to a standard AC outlet.

Note: If some digits appear in the corner of the screen,

press the POWER button without unplugging the power cord.

2) Press the POWER button to turn on the TV.

3) Press the MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel) button to point to "[ENGLISH]".▲ ▼or

5) Select "ENGLISH" or "ESPAÑOL" = Spanish by using

the VOL(ume) ▲ ▼or button.

6) Press the MENU button to exit the menu.

CHANNEL PRESETTING

NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲ ▼or button.

To preset a channel or to change a preset channel, follow the procedure below.

1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears

on the TV screen.

3) Press the CH(annel) button to point to "CHANNEL SET". ▲ ▼or

Then, press the VOL(ume) ▲button.

4) Press the CH(annel) ▲ ▼or button to point to "AUTO MEMO".

Then, press the VOL(ume) ▲button.

The tuner scans and memorizes all active channels in your area.

●The TV distinguishes between standard TV channels and cable (CATV)

channels.

●When AUTO MEMO action is completed, the lowest memorized channel reappears on the

screen.

●When you press the CH(annel) ▲ ▼or button after selecting AUTO MEMO,

the tuner will stop at the memorized channels only.

●The TV may memorize TV channels as CATV channels if the reception conditions are poor. If

this happens, try the AUTO MEMO action again when reception conditions are better.

[ADD/DELETE FUNCTION]

1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel) button to point to "CHANNEL SET". ▲ ▼or

Then, press the VOL(ume) ▲button.

3) Press the VOL(ume) button so that "ADD/DELETE" is selected.▲

4) Use the CH(annel) button to select the channel you wish to put▲ ▼or

into memory or to erase from memory.

Note: The display will return to the normal screen automatically in about

10 seconds.

Perform "ADD/DELETE" function while this display appears on the screen.

●Press the VOL(ume) button to light up the channel number ▲ ▼or

in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) button to light up the channel number ▲ ▼or

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

MTS (Multi-Channel Television Sound) System

You can listen to a program in MTS stereo by following the steps below.

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-

ly when the power resumes.

Type of

broadcast

Regular -None-

Stereo

broadcast STEREO

SAP

Selection MAIN MONO SAP

-None- -None-

MONO STEREO

SAPMAIN MAIN

PREPARATION FOR USE

WATCHING A TV PROGRAM

1) Press the POWER button to turn on the TV.

2) Select the desired channel with the CH(annel) ▲ ▼or button.

3) Adjust the volume to the desired listening level using the VOL(ume) ▲ ▼or button.

4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the POWER automatically turn

off after a set time period.

1) Press the POWER button to turn on the TV and press the SLEEP button

on the remote control .

2) You may change the sleep time by pressing the SLEEP

button on the remote control repeatedly. The timer can be

set up to 90 minutes, 10 minutes each time the SLEEP

button is pushed. (The timer display counts up and sleep

timer will be displayed on the screen when you press the

SLEEP button on remote control.)

Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the

sleep time will be lost.

CLOSED CAPTION SELECTION

SLEEP 10

To cancel the sleep timer:

Press the SLEEP button repeated-

ly until "SLEEP 0" is displayed.

You may view specially labeled (cc) TV pro-

grams, movies, news, prerecorded tapes, etc.

with either a dialogue caption or text display

added to the program.

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel) button to point▲ ▼or

to "CAPTION".

3) Press the VOL(ume) button to select▲ ▼or

the mode you wish.

4) When done, press the MENU button to exit

the menu.

: Press the VOL(ume) ▲ ▼or button.

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

ADD/DELETE

AUTO MEMO

ADD/DELETE

AUTO MEMO

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

[To Select STEREO, MONO or SAP in Stereo broadcast]

1) Press the MENU button so that the menu display appears on the TV screen.

2) Press the CH(annel) ▲ ▼or button to point to "TV SOUND".

3) Press the VOL(ume) ▲ ▼or button to select your desired stereo mode. ([MAIN], [MONO] or

[SAP].)

To show the status, press the

DISPLAY button on the remote

control.

SAP: Second Audio Program,

which means your program, can

also be received in a second lan-

guage or sometimes a radio station.

Type of

broadcast

Regular -None-

Stereo

broadcast STEREO

SAP

Selection MAIN MONO SAP

-None- -None-

MONO STEREO

SAPMAIN MAIN

Type of

broadcast

Regular -None-

Stereo

broadcast STEREO

SAP

Selection MAIN MONO SAP

-None- -None-

MONO STEREO

SAPMAIN MAIN

PICTURE

CHANNEL SET

[ENGLISH]ESPAÑOL

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENGLISH]ESPAÑOL

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MONO]

PICTURE

CHANNEL SET

[ENGLISH]ESPAÑOL

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [SAP]

: Press the VOL(ume) ▲ ▼or button.

BRIGHT

CONTRAST

GAME MODE

COLOR

TINT

SHARPNESS

to increase

brightness

to increase

contrast

to brilliant

to green

to clear

OFF

to decrease

brightness

to decrease

contrast

to pale

to purple

to soft

VOL(ume) VOL(ume)

[-] GAME MODE [+]

OFF ON

[-] BRIGHT [+] [-] CONTRAST [+] [-] COLOR [+] [-] TINT [+] [-] SHARPNESS [+]

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the VOL(ume) button so that "PIC-▲

TURE" is selected.

3) Select the feature you wish to adjust with

the CH(annel) button and adjust it▲ ▼or

with the VOL(ume) ▲ ▼or button.

OPERATIONS

: Press the CH(annel) ▲ ▼or button.

Note:

●In the above steps, the picture adjustment display will disappear from the TV screen automati-

cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume)

▲ ▲ ▼button so that "PICTURE" is selected. Then, press the CH(annel) or button repeatedly

until the display returns to the screen.

[USING THE GAME BUTTON]

You can set the Game mode and front AUDIO/VIDEO input mode at the same time by pressing

the GAME button on the remote control. appears on the TV screen.“GAME”

●To exit the Game mode and external input mode, press the INPUT SELECT button on the

remote control.

●To cancel the Game mode only, adjust the Picture Control. In this case, “VIDEO2” instead of

“ ”GAME appears on the TV screen.

●If you press the GAME button when the TV is off, the TV turns on and will be in the Game

mode and external input mode automatically.

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [ C1]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [ C2]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [ T1]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [ T2]

TV SOUND [MAIN]

Product specificaties

Merk:	Sylvania
Categorie:	Televisie
Model:	6427FD

Heb je hulp nodig?

Als je hulp nodig hebt met Sylvania 6427FD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Televisie Sylvania

Sylvania 6509DD Handleiding

25 Juni 2023

Sylvania 3819LC Handleiding

24 Juni 2023

Sylvania LV448HG Handleiding

22 Juni 2023

Sylvania LRV100 Handleiding

22 Juni 2023

Sylvania 6419TD Handleiding

21 Juni 2023

Sylvania 6419CTA Handleiding

20 Juni 2023

Sylvania 6842PE M Handleiding

20 Juni 2023

Sylvania 6427CTF Handleiding

19 Juni 2023

Sylvania 6727DD Handleiding

18 Juni 2023

Sylvania LC260SS8 Handleiding

17 Juni 2023

Handleiding Televisie

Nieuwste handleidingen voor Televisie

Samsung UN32J4000AF Handleiding

23 December 2024

Panasonic TX-32JS360 Handleiding

21 December 2024

Panasonic TX-65HZ2000 Handleiding

21 December 2024

Peerless-AV XHB554 Handleiding

20 December 2024

TCL 75S551G Handleiding

18 December 2024

Toshiba 24WV2463DB Handleiding

18 December 2024

Sony Bravia K-55S30 Handleiding

18 December 2024

TCL 55S551G Handleiding

18 December 2024

TCL 75QM851G Handleiding

18 December 2024

TCL 65S551G Handleiding

18 December 2024