Swan SI4030 Handleiding

Swan Stoomgenerator SI4030

Lees hieronder de 📖 handleiding in het Nederlandse voor Swan SI4030 (4 pagina's) in de categorie Stoomgenerator. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
wan
designed for life
v2.0
www.swan-brand.co.uk
Copyright © 2012
Swan Products Ltd. PO Box 3117, Stoke-on-Trent ST4 9GD
Est.1931
We love
what we do
s
2 year
GUARANTEE
we’re proud
of our quality
Scan this QR code
to hear about
our story
Find us on Facebook
Steam Generator Iron
Models: SI4030N/SI4030GRN
SI4030N.indd 2-3 25/05/2012 10:17
PartsImportant Safeguards
When using any electrical appliance, basic safety precautions should always be followed
including the following:
1. Always ensure that the voltage on the rating label corresponds to the mains voltage in your
home
2. Incorrect operation and improper use can damage the appliance and cause injury to the user.
3. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliances by
a person responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance.
4. Check the power cord and plug regularly for any damage. If the cord or the plug is damaged,
 itmustbereplacedbythemanufacturerorqualiedpersoninordertoavoidanelectrical
hazard.
5. Do not use the appliance if it has been dropped or damaged in any way. In case of damage,
take the unit in for examination and/or repair by an authorised service agent.
6. Never immerse the unit in water or any other liquid for cleaning purposes.
7. Remove the plug from the socket by gripping the plug. Do not pull on the cord to discon-
nect the appliance from the mains. Unplug the unit when not in use or before cleaning
8. The use of accessory attachments that are not recommended or supplied by the manufac
 turermayresultininjuries,reorelectricshock.
9. Do not let the cord hang over the edge of a table or counter. Ensure that the cord is not in a
position where it can be pulled on inadvertently.
10. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or electric
burner or in a heated oven.
11. Donotusetheapplianceonagasorelectriccookingtoporoverornearanopename.
12. Use of an extension cord with this appliance is not recommended. However, if it is necessary
to use an extension lead, ensure that the lead is suited to the power consumption of the ap-
pliance to avoid overheating of extension cord, appliance or plug point. Do not place the
extension cord in a position where it can be pulled on by children or animals or tripped over.
13. This appliance is not suitable for outdoor use. Do not use the appliance for anything other
than its intended use.
14. Do not carry the appliance by the power cord.
15. Do not leave the appliance unattended during use.
16. Always operate the appliance on a smooth, even, stable surface. Do not place the unit on a
hot surface.
17. The manufacture does not accept responsibility for any damage or injury caused by improper
or incorrect use, or for repairs carried out by unauthorised personnel.
18. In case of technical problems, switch off the product and do not attempt to repair it yourself.
Return the appliance to an authorised service facility for examination, adjustment or repair.
Always insist on the use of original spare parts. Failure to comply with the above mentions
precautions and instructions, could affect the safe operation of this product.
19. Your appliance must never be switched on through an external timer or any kind of separate
remote control system
Helpline Number: 0121 327 6889
WWW.SWAN-BRAND.CO.UK
Helpline Number:
0121 327 6889
WWW.SWAN-BRAND.CO.UK
Specication
Model No. SI4030N/SI4030GRN
230V~50Hz
2200W
wan
designed for life
wan
designed for life
Temperature light
When indicator light is illuminated, it indicates that the iron is heating up; it will go out when it has
reached selected temperature. The light cycles on and off during ironing as the iron maintains the
selected temperature.
Steam Button
When this button is pressed the pump will start and the steam will start to be pumped from base to
iron through the interconnection cord. Please note that small amounts of water left in the intercon-
nection cord from previous ironing sessions may be ejected from the sole plate when this button is
pressedforthersttime.Forthisreasonitisadvisabletoperformtherststeamsurgeawayfrom
garments (a 5 – 10 second surge should expel any water from previous ironing sessions). The
pump may make a noise for a few seconds until it is properly primed.
Temperature dial
Turn the temperature dial clockwise to increase iron temperature and anti-clockwise to reduce it.
Temperature guidelines for particular garment materials are shown on the dial.
Limescale Filter
Thisisaremovablelterthatcollectslimescaleandcalciumdepositsfromthewater.Pleasecall
thehelplinetoorderlimescalelters(thesearechargeable)
Tank Lock button
The button locks the water tank in stand, so that the tank can not slip out and be damaged.
Pump light
This light illuminates when the Steam Button is pressed.
Power light
When the light is on, it indicates that the unit has been connected to power supply.
Steam ON/OFF Switch
In the OFF position the iron has no steam function, which is ideal for dry ironing applications. In
the ON position all steam functions are available.
SI4030N.indd 4-5 25/05/2012 10:17
How to Use
Before rst use
Remove any stickers, protective foil or storage cover from the soleplate.
Heat up the iron to maximum temperature and iron over a piece of damp cloth for several minutes
for the purpose of removing any residue on the soleplate.
Note: Itisnormalforaslightodourtocomefromtheunitduringtherstuse.Thisisduetolightoils
usedtopreservecomponentsduringmanufacture.Theodourwilldisappearafterrstuse.
Operation
1. Connect the power cord to outlet, the power light illuminates.
2. Press down tank lock button then take out water tank from stand. Turn the limescale lter
clockwise then draw it out – you may need to invert the tank to facilitate this. Fill the tank but do not
exceed the MAX level indication on the side.
3.Replacethelimescalelterandslidethetankbackintotheironbase,makingsureit“clicks”into
place. Check the garment label for the required ironing temperature. Then turn the temperature dial
to your desired setting. And the heating light will be illuminated.
Temperature settings
1.(onestar)80-120CSyntheticbres/silk
2.(two star) 120-160C Wool
3.(three star) 160-200C Cotton/linen
Tips: to prevent shiny spots, iron the reverse side of the fabric for silk, wool and synthetic materials;
and to prevent stains, avoid using the steam functions (put Steam ON/OFF switch in OFF position).
Once the soleplate temperature has reached the preset temperature, the heating light will go
out, press down Steam Button. The pump will start and after a few seconds the steam will come
through.Pleasenotewhenpressingthesteambuttonforthersttimeatthestartofthenewironing
session, direct the iron away from garments to allow any small amounts of water from previous
ironing sessions to be ejected.
NOTE: THE PUMP MAY MAKE A NOISE FOR A FEW SECONDS UNTIL IT IS PROPERLY
PRIMED. YOU CAN PRIME THE PUMP A LITTLE QUICKER IF YOU HOLD THE HAND UNIT
BELOW THE HEIGHT OF THE BASE - GRAVITY WILL GET THE STEAM THROUGH QUICKER!
At the beginning of the ironing session, you should iron the articles that require the lowest ironing
temperaturerst,suchasthosemadeofsyntheticbres.
Tip: the interconnection cord can become quite hot after extended use, do not touch!
At any time during the ironing session, you can place the iron on the silicone cushion or on the heel
rest (and have a nice cup of tea). Note: the steam output is 40-70g/min
Alwayscheckrstwhetheralabelwithironinginstructionsisattachedtothearticle.
The iron heats up quicker than it cools down, therefore, you should start ironing the
articlesrequiringthelowesttemperaturesuchasthosemadeofsyntheticbres.
Ifthefabricconsistsofvariouskindsofbres,youmustalwaysselectthelowestironing
temperaturetoironthecompositionofthosebres.
Silk and other fabrics that are likely to become shiny should be ironed on the inner side.
Velvet and other textures that rapidly become shiny should be ironed in one direction
with light pressure applied. Always keep the iron moving at any given moment.
Pure woollen fabrics (100% wool) may be ironed with the iron set a steam position.
Preferably set steam button to the maximum position and use a dry cloth as a mat.
Note: when ironing woolen fabrics, shining of the fabric may occur. So it is suggested
that you should turn the article inside out and iron the reverse side.
Ironing Tips
Cleaning and Maintainance
AFTER IRONING
1.Takeoutthewatertank,removethelimescalelterandemptyallthewaterout,replacethelter
then place tank back into the iron base.
2. With the tank empty, press down the steam surge button button a couple of times to remove any
remaining water in the interconnecting cord, then place the iron back on the base. Warning: the
soleplate is still hot, be careful!
3. Turn the temperature dial back to 0 position and unplug from the mains socket. Allow the iron to
completely cool before cleaning. Note: you can wipe the surface of unit clean with a soft cloth. Try
nottodislodgethesiliconecushionoutofit’smountingsbecauseitisdifculttotback!
Warning: do not immerse the steam iron or stand in water or other liquids.
AUTO-DESCALING FEATURE
Thereisalimescalelterinsidethetank.Theltercanabsorbinsolublecalciumionsandconvert
them to soluble natrium ions, which makes the water softer. This greatly reduces the build-up of
limescale.However,ifyoudoliveinahardwaterarea,thelifeofyourironwillincreasesignicantly
if you use bottled water.
Note: to keep the soleplate smooth, never let any metal materials rub against it.
REPLACE THE LIMESCALE FILTER EVERY 3 MONTHS OR MORE REGULARLY IF YOU LIVE
IN A HARD WATER AREA. VISIT WWW.SWAN-BRAND.CO.UK FOR SPARE FILTERS
wan
designed for life
wan
designed for life
Helpline Number: 0121 327 6889
WWW.SWAN-BRAND.CO.UK
Helpline Number:
0121 327 6889
WWW.SWAN-BRAND.CO.UK
SI4030N.indd 6-7 25/05/2012 10:17

Product specificaties

Merk: Swan
Categorie: Stoomgenerator
Model: SI4030

Heb je hulp nodig?

Als je hulp nodig hebt met Swan SI4030 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Stoomgenerator Swan

Swan

Swan SI9021 Handleiding

18 Februari 2023
Swan

Swan SI4060 Handleiding

18 Februari 2023
Swan

Swan SI4030 Handleiding

18 Februari 2023
Swan

Swan SI12010 Handleiding

18 Februari 2023
Swan

Swan SI11010 Handleiding

18 Februari 2023
Swan

Swan SI9060 Handleiding

18 Februari 2023
Swan

Swan SI9050 Handleiding

18 Februari 2023
Swan

Swan SI9020 Handleiding

18 Februari 2023

Handleiding Stoomgenerator

Nieuwste handleidingen voor Stoomgenerator

Koenic

Koenic KST 245 Handleiding

5 Juli 2024
Calor

Calor GV9560- PRO EXPRESS ULTIMATE Stoomgenerator Handleiding

29 September 2023
Calor

Calor GV9561- PRO EXPRESS ULTIMATE Stoomgenerator Handleiding

29 September 2023
Calor

Calor GV9563- PRO EXPRESS ULTIMATE Stoomgenerator Handleiding

29 September 2023
Calor

Calor GV9570 - PRO EXPRESS ULTIMATE CARE Stoomgenerator Handleiding

29 September 2023
Calor

Calor GV9568 - PRO EXPRESS ULTIMATE Stoomgenerator Handleiding

29 September 2023
Calor

Calor GV9562- PRO EXPRESS ULTIMATE Stoomgenerator Handleiding

29 September 2023
Exquisit

Exquisit BS3101 Handleiding

20 September 2023
Herzberg

Herzberg HG-8039 Handleiding

21 Augustus 2023
Mio Star

Mio Star Continua III Handleiding

29 Augustus 2023