Supermicro X7SBE Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro X7SBE (95 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/95
X7SB4
X7SBE
USER’S MANUAL
Revision 1.1b
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
SUPER MICRO COMPUTER, INC. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software, if any,
and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.1b
Release Date: January 27, 2010
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2010 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Preface
About This Manual
Th is ma nu al is wri tte n f or syst e m in teg ra tor s , P C te chni c i a ns an d
knowledgeable PC users. It provides information for the installation and use of
the X7SB4/X7SBE motherboard. The X7SB4/X7SBE supports a single
Intel® Xeon 3000 Series processor at a system bus speed of 1333 MHz, 1066
MHz or 800 MHz. The Intel® Xeon 3000 Series processors are housed in the
Flip-Chip Land Grid Array package that interfaces with the motherboard via an
LGA775 socket. The X7SB4/X7SBE supports the Intel Virtualization Technology
(VT), Execute Disable Bit, and Enhanced Intel SpeedStep Technology (EIST),
providing the user with the ultimate performance in a slim package. Please refer
to our web site (http://www.supermicro.com/products) for CPU updates or visit
Intel's web site for processor support. This product is intended to be professionally
installed and serviced by a technician.
Manual Organization
Chapter 1 describes the features, spec ific ations and per formance of the
mainboard and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other components into the system.
If you encounter any problems, see Chapter 3, which describes troubleshoot-
ing procedures for the video, the memory and the system setup stored in the
CMOS.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A Appendix B Appendix C provides BIOS Error Beep Codes. and list
the Windows OS Installation and Other Software Installation Instructions.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation
and to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury.
Warning: Important information given to ensure proper system installation
or to prevent damage to the components.
Note:Additional Information given to differentiate various models or to ensure
correct system setup.
Preface
iii


Product specificaties

Merk: Supermicro
Categorie: Moederbord
Model: X7SBE
Breedte: 304.8 mm
Diepte: 243.8 mm
Ethernet LAN: Ja
Aantal USB 2.0-poorten: 2
VGA (D-Sub)poort(en): 1
Aantal Ethernet LAN (RJ-45)-poorten: 2
Duurzaamheidscertificaten: RoHS
Temperatuur bij opslag: -40 - 70 °C
Processor socket: LGA 775 (Socket T)
Processorfabrikant: Intel
Maximum intern geheugen: 8 GB
On-board graphics adapter model: AMD ES1000
Luchtvochtigheid bij opslag: 5 - 95 procent
ECC: Ja
Ethernet interface type: Gigabit Ethernet
Chipset moederbord: Intel® 3210
RAID support: Ja
Geheugen kanaal: Dubbelkanaals
Ondersteunde opslagstationinterfaces: SATA
PS/2 poort(en): 2
Seriële poort(en): 2
PCI Express x8 slots: 1
PCI Express x4 slots: 1
Geheugen voltage: 1.8 V
Soorten RAID: 1, 5,10
Non-ECC: Ja
Wake-on-LAN: Ja
Aantal ondersteunde processoren: 1
Intel® Xeon series: X3200, X3300
Aantal DIMM sloten: 4
Ondersteunend DIMM module capaciteiten: 1GB, 256MB, 2GB, 512MB
Ondersteunde geheugen types: DDR2-SDRAM
Moederbord southbridge: Intel ICH9R
Wifi: Nee
Bedrijfstemperatuur (T-T): 10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V): 8 - 90 procent
PCI-X slots: 2
Moederbord form factor: ATX
Supported memory clock speeds: 667,800 MHz
BIOS type: EEPROM
Grootte BIOS-geheugen: 16 Mbit
ACPI version: 2.0
ATX Power connector (24-pin): Ja
Aantal SATA-aansluitingen: 6
USB 2.0 aansluitingen: 5
Chassis intrusion aansluiting: Ja
On-board graphics adapter geheugen: 32 MB
Processor aantal cores ondersteund: 2, 4

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro X7SBE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden