Supermicro X7DA8 Handleiding

Supermicro Moederbord X7DA8

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7DA8 (133 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/133

X7DA8

USER’S MANUAL

Revision 1.2a

SUPER

X7DAE

Manual Revision 1.2a

Release Date: July 17, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, you are encouraged to try to correct the interference by one or more of

the following measures:

*Reorient or relocate the receiving antenna.

*Increase the separation between the equipment and the receiver.

*Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

*Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of

the X7DA8/X7DAE motherboard. The X7DA8/X7DAE supports

dual Intel quad core/dual core processors with an FSB speed of 667 MHz/1.066

GHz/1.333 GHz. With dual 64-bit quad core/dual core processors built-in, this moth-

erboard offers substantial functionality enhancements to the motherboards based on

the Intel Core microarchitecture while remaining compatible with the IA-32 software.

The features include Intel Hyper-Threading Technology, Virtualization Technology,

Thermal Monitor 1/2 (TM1/TM2), Enhanced Intel SpeedStep technology, Advanced

Dynamic Execution, Advanced Transfer Cache, Streaming SIMD Extensions 3

(SSE3) and Extended Memory 64 Technology (EM64T). These features allow the

motherboard to operate at much higher speeds with better power management in

much safer thermal environments than the traditional motherboards. The X7DA8/

X7DAE is ideal for high performance dual processor (DP) workstation and enterprise

server environments. Please refer to the motherboard speciﬁ cations pages on our

web site (http://www.supermicro.com/products/motherboard) for updates on sup-

ported processors. This product is intended to be professionally installed.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A and Appendix B provide BIOS POST Messages and POST Codes.

Appendix C, Appendix D and Appendix E list HostRAID Setup Guidelines and

Software Installation Instructions.

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury.

Warning: Important information given to ensure proper system installation or

to prevent damage to the components.

Note: Additional Information given to differentiate various models or to ensure cor-

rect system setup.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X7DA8
Breedte:	305 mm
Diepte:	332 mm
Type stroombron:	ATX
Aantal USB 2.0-poorten:	6
Aantal Ethernet LAN (RJ-45)-poorten:	2
Processorfabrikant:	Intel
Maximum intern geheugen:	32 GB
Compatibele besturingssystemen:	32-bit & 64-bit.
ECC:	Ja
Chipset moederbord:	Intel® 5000X
PCI Express x16 slots:	1
PS/2 poort(en):	2
Seriële poort(en):	2
PCI Express x4 slots:	1
LAN controller:	Intel® 82563EB
Soorten RAID:	0, 1,10
Wake-on-LAN:	Ja
PCI-slots:	1
Parallelle poort(en):	1
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Moederbord form factor:	Verlengd ATX
Aantal geheugenslots:	8
Grootte BIOS-geheugen:	64 Mbit
ATX Power connector (24-pin):	Ja
Aantal SATA-aansluitingen:	6
Aansluiting voor diskettestation:	Ja
Chassis intrusion aansluiting:	Ja
Aantal Parallel ATA aansluitingen:	1
Soort aansluiting controller:	SATA
CF card connector:	Ja
IPMI 2.0 slot:	Ja