Supermicro MBD-X8DTH-6-B Handleiding
Supermicro
Moederbord
MBD-X8DTH-6-B
Lees hieronder de š handleiding in het Nederlandse voor Supermicro MBD-X8DTH-6-B (97 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/97
USERāS MANUAL
Revision 1.1c
X8DTH-6F
X8DTH-6
X8DTH-i
X8DTH-iF
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright Ā© 2010 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Manual Revision 1.1c
Release Date: Oct. 7, 2010
The information in this Userās Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our Website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturerās instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. āPerchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorateā.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
About this Manual
This manual is written for system integrators, PC technicians and knowledgeable PC
users. It provides information for the installation and use of the X8DTH-6/
X8DTH-6F/X8DTH-i/X8DTH-iF motherboard.
About this Motherboard
The X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF supports the IntelĀ®
5500/5600 Series Processor, the ļ¬ rst dual-processor platform that supports the
Intel QuickPath Interconnect (QPI) Technology, providing the next generation point-
to-point system interface to replace the current Front Side Bus. With the dual Intel
5520 chips built in, the X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF offers substantial
enhancement in system performance with increased bandwidth and unprecedented
scalability optimized for High Performance Computing (HPC)/Clustering systems
and intensive applications. Please refer to our website (http://www.supermicro.
com/products/) for updates on supported processors. This product is intended to
be installed and serviced by professional technicians.
Manual Organization
Chapter 1 describes the features, speciļ¬ cations and performance of the mother-
board and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes trouble-Chapter 3
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A . Appendix Blists BIOS POST Error Codes provides Software Instal-
lation Instructions.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury.
iii
Preface
Product specificaties
Merk: | Supermicro |
Categorie: | Moederbord |
Model: | MBD-X8DTH-6-B |
Breedte: | 305 mm |
Diepte: | 330 mm |
Aantal USB 2.0-poorten: | 2 |
VGA (D-Sub)poort(en): | 1 |
Aantal Ethernet LAN (RJ-45)-poorten: | 2 |
Certificering: | RoHS |
Meegeleverde software: | Super Doctor III |
Temperatuur bij opslag: | -40 - 70 Ā°C |
PCI Express slots versie: | 2.0 |
Ingebouwde grafische adapter: | Ja |
Luchtvochtigheid bij opslag: | 5 - 95 procent |
ECC: | Ja |
Ethernet interface type: | Gigabit Ethernet |
Chipset moederbord: | IntelĀ® 5520 |
PS/2 poort(en): | 2 |
Seriƫle poort(en): | 1 |
PCI Express x8 slots: | 7 |
Geheugen voltage: | 1.35, 1.5 V |
LAN controller: | IntelĀ® 82576 |
Soorten RAID: | 0, 1,5, 10 |
Non-ECC: | Ja |
Maximum UDIMM geheugen: | 48 GB |
Aantal DIMM sloten: | 12 |
Ondersteunende RDIMM klok snelheden: | 800,1066,1333 MHz |
Ondersteunend DIMM module capaciteiten: | 16GB, 1GB, 2GB, 4GB, 8GB |
Bedrijfstemperatuur (T-T): | 10 - 35 Ā°C |
Relatieve vochtigheid in bedrijf (V-V): | 8 - 90 procent |
Moederbord form factor: | Verlengd ATX |
Supported memory clock speeds: | 800,1066,1333 MHz |
BIOS type: | AMI |
Grootte BIOS-geheugen: | 32 Mbit |
ACPI version: | 3.0 |
Aansluitingen voor behuizingsventilatoren: | 6 |
USB 2.0 aansluitingen: | 2 |
Chassis intrusion aansluiting: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro MBD-X8DTH-6-B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
18 December 2024
4 December 2024
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024