Supermicro DVM-TEAC-DVD-SBT4 Handleiding

Supermicro DVD speler DVM-TEAC-DVD-SBT4

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro DVM-TEAC-DVD-SBT4 (108 pagina's) in de categorie DVD speler. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/108
S SUPER ERVER
2026T-URF4+
SUPER ®
USER’S MANUAL
1.0
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer’s instruction manual, may cause harmful interference
with radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Manual Revision 1.0
Release Date: July 1, 2011
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2011 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 2026T-URF4+.
Installation and maintenance should be performed by experienced technicians
only.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X8DTU-LN4F+ serverboard
and the SC219TQ-R920UBP chassis, which comprise the SuperServer 2026T-
URF4+.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer into a rack and
check out the server con guration prior to powering up the system. If your server
was ordered without processor and memory components, this chapter will refer you
to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 2026T-URF4+.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X8DTU-LN4F+ serverboard, includ-
ing the locations and functions of connections, headers and jumpers. Refer to this


Product specificaties

Merk: Supermicro
Categorie: DVD speler
Model: DVM-TEAC-DVD-SBT4

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro DVM-TEAC-DVD-SBT4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding DVD speler Supermicro

Handleiding DVD speler

Nieuwste handleidingen voor DVD speler

Nextbase

Nextbase Piqo Handleiding

7 December 2024
Philips

Philips MCD113 Handleiding

6 December 2024
LG

LG DVD4950 Handleiding

25 November 2024
Philips

Philips MCD755 Handleiding

24 November 2024
Philips

Philips DVP3006 Handleiding

24 November 2024
Philips

Philips DVP3003 Handleiding

24 November 2024
Philips

Philips MCD710B Handleiding

24 November 2024
Philips

Philips PET719 Handleiding

23 November 2024