Suntec Transform 12000 Handleiding

Suntec Airco Transform 12000

Lees hieronder de 📖 handleiding in het Nederlandse voor Suntec Transform 12000 (13 pagina's) in de categorie Airco. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

Instruction Manual

INTRODUCTION / TECHNICAL DATA

Congratulations on purchasing your SUNTEC WELLNESS KLIMATRONIC

TRANSFORM unit.

Your air-conditioner has been developed and manufactured in accordance with standards of state of the art

technology.

Please read the operating instructions carefully before connecting your TRANSFORM unit to the power

supply in order to prevent damage from improper use. Pay special attention to the safety instructions. If you

pass this TRANSFORM unit on to a third party, you must also include these operating instructions. Please

keep these operating instructions in a safe place for any questions which may arise in future.

Thank you for showing confidence in our product. We hope you enjoy a pleasant room climate with your

Suntec air-conditioner.

MODEL TRANSFORM

7000

TRANSFORM

9000

TRANSFORM

10500

TRANSFORM

12000

TRANSFORM

14000

VOLT 230V 50Hz AC 230V 50Hz AC 230V 50Hz AC 230V 50Hz AC 230V 50Hz AC

POWER CONSUMPTION (W) 760 W 990 W 1150 W 1340 W 1530 W

(Wb24 /Db35)

POWER CONSUMPTION (W)

COOLING 900 W 1100 W 1280 W 1480 W 1700 W

HEATING

(EN60335)

700 W 950 W 1100 W 1300 W 1500 W

COOLING CAPACITY 2.000 W 2.600 W 3.000 W 3.500 W 4.000 W

HEATING CAPACITY 2.000 W 2.600 W 3.000 W 3.500 W 4.000 W

(Wb24 / Db35)

DEHUMIDIFICATION

CAPACITY

(30, RH80%)

30L/day 50L/day 50L/day 60L/day 70L/day

NOISE 50dB(A) 51 dB(A) 52dB(A) 53dB(A) 54dB(A)

AIR CIRCULATION [m³/h] 360 400 420 450 450

COOLING AGENT R410a R410a R410a R410a R410a

REMOTE CONTROL INCLUSIVE INCLUSIVE INCLUSIVE INCLUSIVE INCLUSIVE

TIME SWITCH 0-24 STD 0-24 STD 0-24 STD 0-24 STD 0-24 STD

DIMENSIONS (mm) WXDXH 300x480x630 300x480x630 300x505x778 300x505x778 300x505x778

NET WEIGHT 24 kg 25 kg 28 kg 29.5 kg 30,5 kg

All figures are approx. data. Characteristics pursuant to current Norm EN 14511. Subject to alterations.

EASY TO OPERATE AND EASY TO MOVE AROUND

 The TRANSFORM unit can be moved easily on rollers from room to room.

 The air quantity can be adjusted via up to three ventilation levels.

 The air ﬂow can be very strong and reach up to 5 or 6 metres.

 Installation by a specialist is not required

 Simply plug into a normal household socket with an operating voltage of 230V/ 50Hz.

 The extract air hose can be stored in the TRANSFORM unit for transport and when not in use.

 This Suntec TRANSFORM unit operates in accordance with the heat pump principle. On account of the

special, innovative construction of the TRANSFORM unit, its heating function is extremely eﬃcient

compared to conventional heating units.

SCOPE OF DELIVERY

1 x TRANSFORM unit

1 x remote control

1 x air hose 150 cm

1 x air hose connector

1 x bracket air hose

1 x sir outlet grid

1 x coarse filter top, 1 coarse ﬁlter

bottom

1 x activated carbon ﬁlter top

1 x operating instructions

1 x drainage hose 50 cm

2 x sealing plug

BEFORE INITIATION

1. To avoid damage, place the TRANSFORM unit in an upright position for at least 24 hours

before initiation.

2. Release the holder air hose in the TRANSFORM unit and take out the extract air hose.

3. Fasten the air hose before initiating the TRANSFORM unit.

4. Turn the extract air hose in the direction of the arrow (1) displayed and remove it from the

TRANSFORM unit.

5. Turn the extract air hose in the direction of the arrow (2) displayed and connect it to the

TRANSFORM unit.

6. Plug the power plug into a socket. Never pull the plug out of the socket with force using the

connection line. This can damage the power cable.

7. Since the TRANSFORM unit emits hot air, please observe a suﬀicient minimum safety

distance to each wall. (Fig. 1)

8. Despite the splash water protection, you should not operate the TRANSFORM unit in moist

areas, such as e.g. swimming baths or similar areas.

9. The colour of the TRANSFORM unit can change slightly due to direct solar radiation.

10. The TRANSFORM unit is equipped with a special thermal deactivation. This protects the unit

from overheating in extreme ambient conditions.

11. Please place the TRANSFORM unit so that the air inlet is not impeded, e.g. by furniture or

curtains, since this can negatively eﬀect the capacity.

12. Do not allow direct sunlight to shine on the TRANSFORM unit, since it may then overheat and

automatically deactivate on account of the thermal deactivation.

Product specificaties

Merk:	Suntec
Categorie:	Airco
Model:	Transform 12000
Kleur van het product:	Wit
Timer:	Ja
Gewicht:	29500 g
Breedte:	300 mm
Diepte:	505 mm
Hoogte:	778 mm
Netbelasting:	1340 W
Geluidsniveau:	53 dB
Air conditioner functies:	Cooling, Dehumidifying, Heating
Jaarlijks energieverbruik (koelen):	670 kWu
Energie-efficiëntieklasse (koeling):	A
Luchtfilter:	Ja
Op afstand bedienbaar:	Ja
Energieverbruik per uur (koeling):	- kWu
Ontvochtiging capaciteit:	2.5 L/u
Luchtstroom (hoge snelheid):	450 m³/uur
Koelcapaciteit (max):	- BTU/h
Koel capaciteit in watt (max):	1480 W
Verwarmingscapaciteit in watt (max):	1300 W
Energie-efficiëntieklasse (verwarming):	A
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50 Hz
Timerduur (maximum):	24 uur