Suntec Wellness Cool Breeze 4000 Handleiding

Suntec Wellness Klimaatbeheersing Cool Breeze 4000

Lees hieronder de 📖 handleiding in het Nederlandse voor Suntec Wellness Cool Breeze 4000 (3 pagina's) in de categorie Klimaatbeheersing. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

CoolBreeze 4000 SVM

OPERATING INSTRUCTIONS

PLEASE READ COMPLETELY BEFORE OPERATING

IMPORTANT SAFEGUARDS

1. Use fan only for purposes described in the instruction manual.

2. To protect against electrical shock do not immerse unit, plug, or cord in water or spray with liquids.

3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

4. Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.

5. Do not operate in the presence of explosive and/or flammable fumes.

6. Do not place fan or any parts neat an open flame, cooking or other heating appliances.

7. Do not operate any appliance with a damaged cord, plug, after the appliance malfunctions, or has been dropped/damaged in any manner.

8. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.

9. Do not let the cord hang over the edge of a table, counter, or come in contact with hot surfaces.

10. Do not operate without fan. grills properly in place.

Note: If you experience a problem, please return the fan to the place of the original purchase or see your warranty. Do not attempt to open the motor

housing yourself. Doing so may void your warranty and cause damage to the fan or personal injury.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

PRODUCTINTRODUCTION

OPERATING INSTRUCTIONS

Head Assembly:

STEP1:Unscrew the 4 lock screw on the face of the fan housing, handle the rear grill to the motor housing by matching its 4 screw hole to the 4

screw hole on the front motor housing, then screw the lock screw to lock the rear grill and the front motor housing.

STEP2:insert the motor shaft into the fan blade by matching the motor shaft spindle to the D-shaped cut-out on fan blade, then screw the lock screw.

STEP3:Center the front grill. Allganing the logo, so it is horizontal and parallel to the floor, place onto the rear grill, and snap in place. Secure by

tightening the grill button screw at the bottom of the rear grill.

Pole Assembly:

Unscrew the screw in locking shaft at the bottom of fan housing. insert the upper extension pole to the locking shaft with the right hole position.

Base/Pole Assembly