SunBriteTV 4600HD SB-DP46XA Handleiding

SunBriteTV Niet gecategoriseerd 4600HD SB-DP46XA

Lees hieronder de 📖 handleiding in het Nederlandse voor SunBriteTV 4600HD SB-DP46XA (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

SunBriteTV Deck/Planter Pole Installation Instructions

Part Number SB-DP46XA (For Wall Mount Part Nos. SB-WM46 and SB-WM46NA)

for SunBriteTV Model 4600HD Series

Page 1

SunBriteTV Deck and Planter Pole SB-DP46XA

is designed to accommodate SunBriteTV’s

Articulating Wall Mount SB-WM46 and

Non-Articulating Wall Mount SB-WM46NA

Con guration for SB-WM46

Articulating Wall Mount

Con guration for SB-WM46NA

Non-Articulating Wall Mount

This galvanized steel Deck and Planter Pole allows

installation in virtually any backyard setting. The

pole and supporting  ange can be set in concrete in

a planter or bolted directly to a  at surface, such as

patio or pool deck. Oversized entry and exit holes are

pre-drilled in the pole so wiring is concealed inside

the pole. The hardware provided is stainless steel.

Dimensions:

3” W, x 3” D x 62” H.

Welded mounting  ange for all poles is 12”W x 12” D.

&RQWHQWV Please check contents to be sure all parts are included. If items are missing, contact SunBriteTV customer

service immediately.

1 Pole

2 Horizontal Mounting Bars

Pole Mounting Hardware

8 1/4” Hex nuts

8 1/4” washers

8 Concrete Anchors

Hardware to Mount Articulating

Wall Mount SB-WM46

4 Unistrut Nuts

4 1-1/2” Bolts

4 3/8” Washers

Horizontal Mounting Bar

Hardware

4 3/8” Lock nuts

4 1” Bolts

4 3/8” Washers

Hardware to Mount

Non-Articulating

Wall Mount SB-WM46NA

4 Unistrut Nuts

4 1-1/2” Bolts

4 5/16” Washers

Cable Hole Cap

DISCLAIMER: SunBriteTV LLC intends to make this manual

accurate and complete. However, we make no claim that the

information contained herein covers all details., conditions or

variations, nor does it provide for every possible contingency

in connection with the installation or use of this product. The

information contained in this document is subject to change

without notice or obligation of any kind. SunBriteTV makes no

representation of warranty, expressed or implied regarding

the information contained herein. SunBriteTV assumes no

responsibility for accuracy, completeness or su ciency of the

information contained in this document.

Install Deck Planter Pole (Figure 2):

1. Use the Flange as a template to mark the locations of holes.

2. Drill 1/4” diameter x 1” deep holes using a concrete drill.

3. Use the 8 1/4” Concrete Anchors to mount the Pole.

4. Shim Pole level and plumb.

5. Secure using the 1/4” Nuts and Washers .

6. Orient the Pole so that Wall Plate faces the seating area.

3Install Deck/Planter Pole:

WARNING: TV must be installed at least 5 ft.

away from water’s edge.

SunBriteTV Deck/Planter Pole and Wall Mount Installation Instructions

for SunBriteTV Model 4600HD

Deck/Planter Pole Part No. SB-DP46X Wall Mount Part No. SB-WM46

:$51,1*79PXVWEHLQVWDOOHGDWOHDVW

IHHWDZD\IURPZDWHU¶VHGJH

TV Placement Guidelines (Figure 1):

SunBriteTVTM LCD televisions are twice as bright as most

indoor LCD TVs. The sun, however, delivers more than 30

times the brightness of our TVs. Therefore, it is important

that you do not place the TV where the screen faces direct

sunlight; otherwise, this will cause the image on the screen

to be washed out.

Intense direct sunlight falling on the screen over an extend-

ed period of time may cause dark spots to form on the screen

image. This is a characteristic of LCD TV technology, and is

a temporary condition that will go away after the screen is

pointed away from the sun.

For optimum viewing, SunBriteTV recommends the

following placement and installation guidelines:

Ideal placement is in an area where the TV is shaded by

trees, landscape and/or structures, or under a patio cover or

gazebo.

SunBriteTV recommends mounting the TV on SunBriteTV’s

articulating, tilt and swivel Wall Mount (Part No. SB-WM46) so

the TV screen can be turned away from the location of the

sun (see Figure 1).

The articulating wall mount also allows the TV to be rotated

away and angled down from any highly re ective surfaces,

such as water, white walls, concrete, etc.

SunBriteTV recommends using the SunBriteTV dust cover

(Part No. SB-DC46) when the TV is not in use, especially if

the sun is shining on the TV during the day.

Figure 1

Prepare Pole Location:

Chose an area that is away from standing water and sprinklers

(Irrigation water may contain minerals that can damage the

 nish on the pole and TV.).

Bring the appropriate signal cables to the location (CATV,

Video, Audio, etc.).

If using the Pole in a planter:

Create an appropriately sized concrete pier with a level top

surface at least three inches above the grade.

If using the Pole in a deck:

Chose a ﬂ at, level, shaded area away from sprinklers and standing

water.

Page 2

Page 3

SunBriteTV Deck/Planter Pole and Wall Mount Installation Instructions

for SunBriteTV Model 4600HD

Horizontal

Mounting Bar

Hole Positions

Install Articulating Wall Mount SB-WM46 to Deck/Planter Pole

(If you are Installing the Non-Articulating Mount SB-WM46NA, skip to step 5.)

Attach Horizontal Mounting Bar to Pole

There are 8 Horizontal Mounting Bar Holes at the top of the Deck Planter

Pole. Note that the Holes have been assigned Position numbers and

letters.

Position Row 1 and 4 are the rows that are to be used with the Articulating

Wall Mount SB-WM46.

1. Align the top Horizontal Mounting Bar so that the fourth hole from the

outside of the bar on the left side and right side line up to Position 1a and

1b. This step will center the bar to the pole (Figure 3).

2. Place the 3/8” Washer over the Mounting Bar Hole at Position 1a, and put

the 1” Bolt through the washer and Mounting Bar, to secure the Washer in

place (Figure 4). From the back side attach the 3/8” Lock Nut and secure

tightly Figure 5). Repeat steps at Position 1b, to complete installation of

the top Mounting Bar.

3. Align the bottom Horizontal Mounting Bar so that the fourth hole from

the outside of the bar on the left side and right side line up to Position 4a

and 4b. This step will center the bar to the pole.

4. Place the 3/8” Washer over the Mounting Bar Hole at Position 4a, and put

the 1” Bolt through the Washer and Mounting Bar, to secure the Washer in

place. From the back side attach the 3/8” Lock Nut and secure tightly. Repeat

steps at Position 4b, to complete installation of the bottom Mounting Bar.

D E

D E

Deck Planter Pole

D

D

D

D

E

E

E

E

Horizontal

Mounting Bars

Attach Articulating Wall Mount SB-WM46 to

Deck/Planter Pole

Figure 6

Figure 8 Unistrut Nut Placement

Figures 9 A and B

1. Install all four Unistrut Nuts on the Horizontal

Mounting Bar:

A. Align the channel of the Unistrut Nut with the

Mounting Bar Lip (Figure 6).

B.. Slide the Unistrut Nuts in 2.25” from each end of

Mounting Bar. The Unistrut Nuts will be 16 inches

apart, and in position to accept the Wall Mount

(Figure 7).

2. Attach Articulating Wall Bracket (sold separately) to the

Horizontal Mounting Bar

A. Attach the two 1-1/2” Bolts and 3/8” Washers to the

two Unistrut Nuts on the top Mounting Bar. Fasten

loosely enough that the Articulating Wall Mount

bracket will  t between the Washer and the Unistrut

Nut (Figure 8).

B. Align the round Keyhole opening with the Washers

and Bolts, and hang the Wall Mount so that it sits

behind the Washer. Slide the Wall Mount to the left.

Tighten Bolts to hold Wall Mount Securely to the pole.

(Figures 9 A and B..).

C. With the remaining two Bolts and Washers, secure the

Wall Mount to the lower Horizontal Mounting Bar (Figure 10).

3/8” Washer

3/8” Unistrut Nut

1-1/2” Bolt

Unistrut Channel

Pole Plate Lip

1-1/2” Bolt

Wall Mount

Keyhole Opening

3/8” Washer

Figure 7

Wall Mount

Horizontal Mounting Bar

Figure 10

Figure 3

Front

1” Bolt

3/8” Washer

3/8” Lock Nut

Back

Figure 4 Figure 5

To complete installation, go to Step 6 on Page 5.

Product specificaties

Merk:	SunBriteTV
Categorie:	Niet gecategoriseerd
Model:	4600HD SB-DP46XA

Heb je hulp nodig?

Als je hulp nodig hebt met SunBriteTV 4600HD SB-DP46XA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd SunBriteTV

SunBriteTV SB-WM-ART2-L-BL Handleiding

18 Februari 2024

SunBriteTV SB-WM-ART1-M-BL Handleiding

18 Februari 2024

SunBriteTV 4600HD SB-DP46XA Handleiding

18 Februari 2024

SunBriteTV SB-CM-T-L-BL Handleiding

18 Februari 2024

SunBriteTV SB-WM-F-L-BL Handleiding

18 Februari 2024

SunBriteTV SB-WM-F-M-BL Handleiding

18 Februari 2024

SunBriteTV SB-WM-T-M-BL Handleiding

18 Februari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Gourmetmaxx 03863 Handleiding

24 December 2024

Vello PGS-P Handleiding

24 December 2024

Venom Quad Charging Station VS4796 Handleiding

24 December 2024

Nec IPJ2000CM Handleiding

24 December 2024

Monogram ZKPN Handleiding

24 December 2024

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024

Philips Senseo HD7002 Handleiding

24 December 2024

D-Link DUB-C2 Handleiding

24 December 2024

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024

Nec DS1-TM01 Handleiding

24 December 2024