Stihl HL 75 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Stihl HL 75 (74 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/74
1HL 75, HL 75 K
English / USA
Printing inks contain vegetable oils;
paper can be recycled.
Printed on chlorine-free paper.© ANDREAS STIHL AG & Co. KG, 2003
0458 389 3021. M1.4. C3. PM. Printed in Germany
STIHl
Contents
Guide to Using this Manual .............. 2
Safety Precautions ........................... 3
Assembling the Unit ....................... 12
Using the Hedge Cutter .................. 13
Fuel ................................................ 15
Fueling ............................................ 16
Adjusting Cutter Bar Angle ............. 17
Fitting the Harness ......................... 18
Starting / Stopping the Engine ........ 18
Cleaning the Air Filter ..................... 21
Motor Management ........................ 22
Adjusting the Carburetor ................ 22
Spark Arresting Screen* in Muffler . 24
Checking the Spark Plug ................ 24
Lubricating the Gearbox ................. 25
Replacing the Starter Rope
and Rewind Spring ......................... 26
Sharpening Instructions .................. 29
Operating Instructions .................... 29
Storing the Machine ........................ 29
Maintenance Chart ......................... 30
Parts and Controls .......................... 31
Definitions ....................................... 32
Specifications ................................. 33
Maintenance and Repairs ............... 34
STIHL Incorporated Federal
and California Emission Control
Warranty Statement ........................ 35
* see “Guide to Using this Manual”
Allow only persons who understand this
manual to operate your hedge cutter.
To receive maximum performance and
satisfaction from your STIHL hedge
cutter, it is important that you read and
understand the maintenance and safety
precautions, starting on page 3, before
using your hedge cutter.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
!Warning!
Because a hedge cutter is a high-speed
cutting tool some special safety
precautions must be observed to reduce
the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improve-
ments are made from time to time. If the
operating characteristics or the
appearance of your hedge cutter differs
from those described in this manual,
please contact your STIHL dealer for
information and assistance.
2
English / USA
HL 75, HL 75 K
Pictograms
All the pictograms attached to the
machine are shown and explained in
this manual.
The operating and handling instructions
are supported by illustrations.
Symbols in text
The individual steps or procedures
described in the manual may be marked
in different ways:
:Step or procedure without direct
reference to an illustration.
Description of step or procedure that
refers directly to the illustration and
contains item numbers that appear in
the illustration.
Example:
Loosen the screw (1)
Lever (2) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Warning where there is a risk of
damaging the machine or individual
components.
Note or hint which is not essential
for using the machine, but may
improve the operator’s under-
standing of the situation and result
in better use of the machine.
Note or hint on correct procedure in
order to avoid damage to the
environment.
Equipment and features
This instruction manual refers to
several models with different
features. Components that are not
installed in all models and related
applications are marked thus *.
Such components are available as
special accessories from your
STIHL dealer.
Engineering improvements
STIHL’s philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
Therefore, we cannot be responsible for
changes, modifications or
improvements not covered in this
manual.
Guide to Using this Manual


Product specificaties

Merk: Stihl
Categorie: Heggenschaar
Model: HL 75

Heb je hulp nodig?

Als je hulp nodig hebt met Stihl HL 75 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heggenschaar Stihl

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar