StarTech.com TB3DKM2HDL Handleiding

StarTech.com Overige computer accessoire TB3DKM2HDL

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com TB3DKM2HDL (2 pagina's) in de categorie Overige computer accessoire. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 31, 2020 9:44 AM

Product Diagram (TB3DKM2HDL)

Component Function

1Thunderbolt 3 Host

Connector

• Connect the to the Docking Station Host

Laptop.

2HDMI Ports x 2 • Connect an to the HDMI Display Device

Docking Station.

• Two or can be HDMI 4K Display Devices

connected to the .Docking Station

3USB 3.0 Port

• Connect a (mouse, ash drive, USB Peripheral

etc.) to the .Docking Station

• Data transfer up to 5Gbps.

4USB 2.0 Port

• Connect a (mouse, ash drive, USB Peripheral

etc.) to the .Docking Station

• Data transfer up to 480Mbps.

5RJ45 Port • Connect a to the Network Device Docking

Station.

Requirements

For the latest requirements, please visit www.startech.com/TB3DKM2HDL

• Host Laptop w/ Thunderbolt 3 port x 1

• HDMI Display Device x 2

Notes: A 4K-capable display is required to achieve 4096 x 2160p resolution.

Video output capabilities are dependent on the video card and hardware specications of

your connected host laptop.

You can connect a dierent type of display, such as a DisplayPort or VGA monitor using

an active video adapter (sold separately):

Thunderbolt™ 3 Dual HDMI Mini Bus Powered Docking Station for Laptops | 4K 60Hz | 28 cm Cable

• HDMI Cables x 2

Operating System:

• Windows® 10, 8, and 8.1

• macOS 10.13 and 10.12

Installing the Docking Station

When you connect the Docking Station to a computer that’s running Windows 10,

Windows 8/8.1 or macOS, the required drivers are automatically installed.

1. Connect an (sold separately) to the on the HDMI Cable HDMI Port Docking Station

and the other end to an HDMI port of a .Display Device

2. Repeat step 1 to connect a second .Display Device

3. Connect a to the and on the USB Peripheral Device USB 3.0 USB 2.0 Ports

Docking Station (e.g. USB devices, etc.).

4. Connect a to the on the and the other CAT5e/6 Cable RJ45 Port Docking Station

end to an RJ45 port on a .Network Device

5. Connect the on the to a Thunderbolt 3 Host Connector Docking Station

Thunderbolt 3 port on the .Host Laptop

Note: In Windows 10 or 8/8.1 you might see a pop-up message requesting permission

to allow the docking station to connect to your computer. If you see this pop-up

message, select from the list and click . If required, follow any Always Connect OK

other on-screen instructions to complete the installation.

Congure your display device

Use the Windows or macOS to adjust display settings for each connected monitor.

Supported Video Resolutions

Thunderbolt technology supports both video and data throughput. However, it

prioritizes video bandwidth to help ensure seamless display performance. The

performance of the remaining docking station functions depends entirely on the

display conguration you used.

1235

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a three-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Verify that your components are Thunderbolt 3 compliant

1. Make sure that you are using Thunderbolt compliant cables. Thunderbolt 3 uses

the same connector type as USB-C. If you are using a USB-C cable that is not

Thunderbolt compliant, replace the cable with one that is compliant.

2. Make sure that the port on your computer is Thunderbolt 3 compliant. Thunderbolt

3 uses the USB-C connector type, but not all USB-C connectors are compatible with

Thunderbolt 3. If you are using a USB-C port that is not Thunderbolt 3 compliant,

switch to a port that is Thunderbolt 3 compliant.

Test the Thunderbolt peripheral

1. Use a second Thunderbolt peripheral, and see if it works. Ideally, the second

peripheral is one that you know works in other setups. If the second peripheral

works in the current setup, then there is probably an issue with the rst Thunderbolt

peripheral.

2. Use the Thunderbolt peripheral with a second setup. If it works in the second setup,

then there is probably an issue with the rst setup.

The supports the follow maximum resolutions:Docking Station

Number of

Displays Ports Maximum Resolution

1 1 x HDMI ports 4096 x 2160p (60Hz)

2 2 x HDMI ports 4096 x 2160p (60Hz)

Notes: 3840 x 2160p resolution, found on most standard , is also a fully 4K Displays

supported resolution.

Depending on the conguration and the supported resolutions of your connected

monitor(s), the can support video resolutions lower than specied Docking Station

above.

In a multi-display conguration, set the refresh rates on each of your connected Display

Devices to the same values, otherwise your monitors might not properly display.

Troubleshooting

If you are experiencing issues, there are some quick tests that you can complete to

narrow down the source of the issue.

Update your computer to use Thunderbolt 3

Visit and look for your computer in the list http://thunderbolttechnology.net/updates

of aected computers. If your computer is listed, then you must update your computer

for its Thunderbolt 3 ports to function properly. To update your computer, follow the

instructions on the website or contact your manufacturer.

Product specificaties

Merk:	StarTech.com
Categorie:	Overige computer accessoire
Model:	TB3DKM2HDL
Kleur van het product:	Grijs
Gewicht:	147.8 g
Breedte:	69 mm
Diepte:	124 mm
Hoogte:	27 mm
Snoerlengte:	0.28 m
Gewicht verpakking:	270 g
Breedte verpakking:	139 mm
Diepte verpakking:	195 mm
Hoogte verpakking:	37 mm
Gebruikershandleiding:	Ja
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Geïntegreerde geheugenkaartlezer:	Nee
Aantal USB 2.0-poorten:	1
Aantal HDMI-poorten:	2
Microfoon, line-in ingang:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Resolutie (maximum digitaal):	3840 x 2160 Pixels
Duurzaamheidscertificaten:	RoHS
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u
Temperatuur bij opslag:	-20 - 70 °C
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	1
Ondersteunt Mac-besturingssysteem:	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Hostinterface:	Thunderbolt 3
Ondersteunde server operating systems:	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 x64
Aantal displays ondersteund:	2
Chipset:	Intel JHL6540 (Alpine Ridge), Texas Instruments TPS65983A, Parade PS176, ASMedia ASM1042A, Intel WGI210
(Buitenste) hoofdverpakking hoogte:	270 mm
(Buitenste) hoofdverpakking breedte:	300 mm
(Buitenste) hoofdverpakking lengte:	437 mm
Hoeveelheid per (buitenste) hoofdverpakking:	24 stuk(s)
Wake-on-LAN:	Ja
Bedrijfstemperatuur (T-T):	5 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Code geharmoniseerd systeem (HS):	84733020