StarTech.com RJ4511TOOL Handleiding

StarTech.com Tang RJ4511TOOL

Lees hieronder de đź“– handleiding in het Nederlandse voor StarTech.com RJ4511TOOL (1 pagina's) in de categorie Tang. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Wiring Tools
User’s Guide
StarTech.com has the tools you need to get any cable job finished,
including the DUCTCUTTER, our sharp solution for cutting through,
you guessed it, plastic wiring ducts. This StarTech.com tool is specially
designed for manipulating RJ-45 and RJ-11 connectors and saves
valuable time and effort on any related cable job.
RJ45 and RJ11 Strip & Crimp Tool
RJ4511TOOL
Lock
Stripper
Cutter
Handles
Safety
Modular Plug
Holder for 6
Position Use
Modular Plug
Holder for 8
Position Use
1. Hold the RJ4511TOOL with “Safety” side towards you.
Insert the cable you wish to cut in the cutter section of the
tool. Squeeze handles together to cut the wire.
2. Take the newly cut end and place it in the stripper
section of the tool. For a longer strip to remove place the
end of the cable at the backstop, for a shorter strip place it
at the tab. Squeeze handles together and release slightly.
Pull off the stripped insulation.
3. Insert the cable and outer jack into the appropriate
modular plug holder. Squeeze handles firmly. Release and
remove the terminated plug.
Openning the Tool: Squeeze hanle firmly. The lock will
release. The tool is now ready to be used.
Locking the Tool: Squeeze handles together with one
hand. Push the lock in with the other hand and release the
handles. The tool is now secured.


Product specificaties

Merk: StarTech.com
Categorie: Tang
Model: RJ4511TOOL
Gewicht verpakking: 343 g
Breedte verpakking: 207 mm
Diepte verpakking: 76 mm
Hoogte verpakking: 27 mm
Soort kabel: RJ45, RJ11

Heb je hulp nodig?

Als je hulp nodig hebt met StarTech.com RJ4511TOOL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden