StarTech.com PEXUSB3S4V Handleiding

StarTech.com Netwerkkaart/adapter PEXUSB3S4V

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com PEXUSB3S4V (4 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

4 Port PCI Express PCIe SuperSpeed USB 3.0 Controller Card Adapter with UASP - SATA Power

StarTech ID: PEXUSB3S4V

The PEXUSB3S4V PCI Express USB 3.0 Card (with SATA Power) adds 4 external USB 3.0 ports to any PCI

Express-enabled computer system with support for data rates up to 5 Gbps, while remaining backward compatible

with USB 2.0 / 1.x devices.

Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster

than conventional USB 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible

operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP

technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly

increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details.

The card uses a "stacked" port layout that places the ports one on top of the other, enabling all four USB 3.0 ports to

be external facing, while still allowing the card to fit into a small form factor/low profile computer system using the

included low profile bracket.

Plus, with a built-in SATA power connector, each USB port can provide up to 900mA of power to devices that draw

power from a host bus connection (500mA for USB 2.0) by connecting to your computer power supply.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows® 8, Server 2012 and Linux kernel 2.6.3 or later. In testing UASP performed with up

to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance.

At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.

Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP-

enabled StarTech.com enclosure, and a SATA III solid state drive.

Applications

Upgrade an older PCIe-based system with USB 3.0 connectivity, to fully utilize USB 3.0 devices

Expand a system's USB capabilities with four additional external USB ports, for connecting additional

external hard drives, CD/DVD drives, MP3 players, printers, scanners, webcams, game controllers, digital

cameras, etc.

Features

4 external USB 3.0 ports in a stacked layout

UASP support for more efficient data transfer

Fully compliant with USB 3.0 revision 1.0 specifications and Intel xHCI rev0.95 specifications

Built-in optional SATA power connector for bus-powered USB devices

Optionally provides up to 900mA per USB port

Backward compatible with USB 2.0 and USB 1.0/1.1 devices

Compliant with PCI Express 2.0 specifications

Includes a Low Profile/half-height installation bracket

Technical Specifications

Warranty 2 Years

Bus Type PCI Express

Card Type Standard Profile (LP bracket incl.)

Chipset ID NEC uPD720201

Interface USB 3.0

Port Style Integrated on Card

Ports 4

Connector

Type(s)

1 - PCI Express x1 Male

External Ports 4 - USB 3.0 A (9 pin; SuperSpeed) Female

Internal Ports 1 - SATA Power (15 pin) Plug

Type and

Rate

USB 3.0 - 5 Gbit/s

UASP

Support

Yes

Compatibility

Windows XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8

(32/64-bit)

Product

Height

2.7 in [68 mm]

Product

Length

3 in [75 mm]

Product

Weight

1.6 oz [45 g]

Product

Width

0.7 in [19 mm]

Humidity 20% ~ 80% RH

Operating

Temperature

5°C to 50°C (41°F to 122°F)

Storage

Temperature

-25°C to 70°C (-13°F to 158°F)

System and

Cable

Requirements

Available PCI Express expansion slot

Note The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen

1.0 enabled computers, the max throughput is 2.5 Gbps. If used with PCI Express Gen 2.0 enabled

computers, the max throughput is 5 Gbps.

Package

Quantity

Shipping

(Package)

Weight

0.2 lb [0.1 kg]

Product specificaties

Merk:	StarTech.com
Categorie:	Netwerkkaart/adapter
Model:	PEXUSB3S4V
Gewicht:	45 g
Breedte:	68 mm
Diepte:	19 mm
Hoogte:	75 mm
Gewicht verpakking:	138 g
Breedte verpakking:	162 mm
Diepte verpakking:	132 mm
Hoogte verpakking:	33 mm
Gebruikershandleiding:	Ja
Certificering:	CE, FCC
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-20 - 70 °C
Intern:	Ja
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	4
Compatibele besturingssystemen:	Windows XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8 (32/64-bit)
Mac-compatibiliteit:	Nee
Hostinterface:	PCIe
Meegeleverde drivers:	Ja
Ondersteunde server operating systems:	Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Montagebeugels meegeleverd:	Ja
Chipset:	NEC uPD720201
Bedrijfstemperatuur (T-T):	5 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Code geharmoniseerd systeem (HS):	84733020
Uitbreidingskaartstandaard:	PCIe 2.0
Data transfer snelheid (max):	5 Gbit/s
Aantal Internal SATA ports:	1
Output interface:	USB 3.2 Gen 1 (3.1 Gen 1)
UASP-ondersteuning:	Ja