StarTech.com NETRS232_2 Handleiding

StarTech.com Netwerkkaart/adapter NETRS232_2

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com NETRS232_2 (16 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

Rev. B05

NETRS232 Series

Quick Install tion & Advanced Features Guidea

Congratulations on your purchase of a StarTech NETRS232. NETRS232s connect serial

devices to Ethernet networks. Any serial device—POS equipment, factory machinery,

monitoring hardware, or security devices, for example—can send its information to the

NETRS232.The NETRS232 places the serial data in a TCP/IP wrapper and sends it out its

Ethernet port.Data moving the other direction,from the Ethernet side of the

NETRS232 to the serial device, undergoes the same process in reverse.StarTech

NETRS232s use industry-standard hardware interfaces and are supported in Windows®

2000,Windows® XP, Linux, and QNX.

• Network serial devices

• Make devices available to multiple users

• Manage multiple serial devices from a single PC

• Eliminate long dedicated serial runs

• Stop using costly PCs as dedicated serial port servers

• Remotely access and control serial devices

• Eliminate long-distance phone-modem charges

With a NETRS232, you can:

Included with your package, you should have the following:

• StarTech NETRS232

• Power supply

• Installation diskette

• Quick Installation Guide

Getting Started

Please note! NETRS232 is factory pre-conﬁgured with passwords as follows:

Administrative password: admin

Port 1 password: port1

Port 2 password: port2

etc..

Before using NETRS232 you will need to unlock the unit using the

administrative password in order to conﬁgure the device's IP address and

other settings. We recommend changing the administrative password to

something other than the factory default for best security.

Port passwords can be removed or altered as needed, provided

administrative access is granted.

Hardware Setup

1. Connect the power supply to the NETRS232 and to AC power.

2. The power (red) LED will light to indicate that the unit is receiving power.

3. Connect a network cable to the RJ-45 jack of the NETRS232.The other end of the

network cable can be attached to either:

• an Ethernet hub or switch,using a length of standard Ethernet network cable

• a host PC directly, using an Ethernet cross-over cable.

Network status is indicated by two LEDs on the RJ-45 connector.The left (yellow) LED

indicates network activity. It is on by default, turning off when network activity occurs

at the NETRS232.The right (green) LED indicates a network link. It is off by default, but

lights when a network link exists.

4. Connect a serial device to the NETRS232.

Serial port activity is indicated by two status LEDs per port. The upper (yellow) LED

lights when the serial port is transmitting data.The lower (green) LED lights when the

serial port is receiving data.

Power

connector

Single Port Dual Port

Power

indicator

Network

connector (RJ-45)

Network

Activity and Link

indicators

Serial connector

(DB-9 shown)

Serial Tx

indicator

Serial Rx

indicator Serial 1

connector

(DB-9 shown)

Serial 2

connector

(DB-9 shown)

Serial Tx

indicators

Serial Rx

indicators

Product specificaties

Merk:	StarTech.com
Categorie:	Netwerkkaart/adapter
Model:	NETRS232_2
Kleur van het product:	Wit
Gewicht:	227 g
Breedte:	95 mm
Diepte:	130 mm
Hoogte:	44 mm
Gewicht verpakking:	500 g
Breedte verpakking:	112 mm
Diepte verpakking:	230 mm
Hoogte verpakking:	63 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	LAN, Power
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Interface:	Ethernet
Duurzaamheidscertificaten:	ENERGY STAR
Aantal:	1
Intern:	Nee
Power LED:	Ja
Ondersteunt Linux:	Ja
Hostinterface:	RJ-45
Maximale overdrachtssnelheid van gegevens:	0.1152 Mbit/s
Bedrijfstemperatuur (T-T):	0 - 70 °C